Hewlett Packard Enterprise ProLiant Compute DL380 Gen12 | SPECpower_ssj2008 = 22,121 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Feb 4, 2025 |
Hardware Availability: | Mar-2025 | Software Availability: | Oct-2024 | Publication: | Feb 25, 2025 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.3% | 22,336,672 | 924 | 24,170 |
90% | 90.0% | 20,234,701 | 904 | 22,384 |
80% | 80.0% | 17,999,601 | 718 | 25,066 |
70% | 70.0% | 15,748,878 | 574 | 27,444 |
60% | 59.9% | 13,478,128 | 498 | 27,072 |
50% | 49.9% | 11,224,194 | 444 | 25,292 |
40% | 40.0% | 8,986,583 | 394 | 22,780 |
30% | 30.0% | 6,743,100 | 347 | 19,447 |
20% | 20.0% | 4,499,642 | 303 | 14,873 |
10% | 10.0% | 2,248,181 | 258 | 8,727 |
Active Idle | 0 | 220 | 0 | |
∑ssj_ops / ∑power = | 22,121 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant Compute DL380 Gen12 |
Form Factor: | 2U |
CPU Name: | Intel Xeon 6787P 2.0 GHz (Intel Turbo Boost Technology up to 3.10 GHz) |
CPU Characteristics: | 86 core, 2.00 GHz, 336 MB L3 Cache |
CPU Frequency (MHz): | 2000 |
CPU(s) Enabled: | 172 cores, 2 chips, 86 cores/chip |
Hardware Threads: | 344 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 2 MB I+D on chip per core |
Tertiary Cache: | 336 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 256 |
# and size of DIMM: | 16 x 16384 MB |
Memory Details: | 16 GB 1Rx8 PC5-6400B-R; slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket |
Power Supply Quantity and Rating (W): | 1 x 2200 |
Power Supply Details: | HPE 2200W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit(P44712-B21) |
Disk Drive: | HPE 480gb Sata 6g Read Intensive Sff Sc Tlc Ssd |
Disk Controller: | 1 x Embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x BCM 5719 1Gb 4p BASE-T OCP Adptr (P51178-B21) |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 15 SP6 |
OS Version: | 6.4.0-150600.21-default |
Filesystem: | xfs |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 17.0.13+10-LTS-268, mixed mode) |
JVM Command-line Options: | -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseBiasedLocking -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap |
JVM Affinity: | numactl -C $((physicalCoreId + 0)),$((physicalCoreId + 1)),$((physicalCoreId + 172)),$((physicalCoreId + 173)) |
JVM Instances: | 86 |
JVM Initial Heap (MB): | 1500 |
JVM Maximum Heap (MB): | 1500 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U68 v1.20 (02/04/2025) |
Management Firmware Version: | 1.01.00 Jan 01 2025 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
BIOS Platform Configuration (RBSU):
Hardware | |
---|---|
Hardware Vendor: | HPE |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2 x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2019 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_144-b01 (build 25.144-b01, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GC21887 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-H48PA-60-1 |
Date of Calibration: | 01-Aug-2024 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.11.1-462c978e-20240907 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 924 | 21.1 |
90% | 904 | 21.1 |
80% | 718 | 21.1 |
70% | 574 | 21.1 |
60% | 498 | 21.0 |
50% | 444 | 21.0 |
40% | 394 | 20.9 |
30% | 347 | 20.9 |
20% | 303 | 20.9 |
10% | 258 | 20.9 |
Active Idle | 220 | 20.9 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 20.9 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 16,742,774 | ||
Calibration 2 | 22,548,668 | ||
Calibration 3 | 22,422,348 | ||
ssj_ops@calibrated=22,485,508 | |||
100% | 99.3% | 22,485,508 | 22,336,672 |
90% | 90.0% | 20,236,957 | 20,234,701 |
80% | 80.0% | 17,988,406 | 17,999,601 |
70% | 70.0% | 15,739,856 | 15,748,878 |
60% | 59.9% | 13,491,305 | 13,478,128 |
50% | 49.9% | 11,242,754 | 11,224,194 |
40% | 40.0% | 8,994,203 | 8,986,583 |
30% | 30.0% | 6,745,652 | 6,743,100 |
20% | 20.0% | 4,497,102 | 4,499,642 |
10% | 10.0% | 2,248,551 | 2,248,181 |
Active Idle | 0 | 0 |