Hewlett Packard Enterprise ProLiant ML30 Gen11 | SPECpower_ssj2008 = 10,206 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Oct 24, 2023 |
Hardware Availability: | Dec-2023 | Software Availability: | Jul-2023 | Publication: | Jan 17, 2024 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.5% | 1,065,568 | 83.9 | 12,695 |
90% | 90.3% | 967,072 | 78.6 | 12,299 |
80% | 80.0% | 856,609 | 72.0 | 11,902 |
70% | 69.9% | 749,001 | 63.0 | 11,892 |
60% | 59.9% | 641,046 | 55.0 | 11,645 |
50% | 50.1% | 535,975 | 50.2 | 10,683 |
40% | 40.1% | 428,973 | 45.4 | 9,447 |
30% | 30.0% | 321,473 | 40.6 | 7,915 |
20% | 20.0% | 213,786 | 35.6 | 6,008 |
10% | 9.9% | 106,076 | 30.2 | 3,517 |
Active Idle | 0 | 22.2 | 0 | |
∑ssj_ops / ∑power = | 10,206 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant ML30 Gen11 |
Form Factor: | Tower |
CPU Name: | Intel Xeon E E-2488 |
CPU Characteristics: | 8-Core, 3.20 GHz, 24 MB L3 Cache |
CPU Frequency (MHz): | 3200 |
CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
Hardware Threads: | 16 (2 / core) |
CPU(s) Orderable: | 1 chip |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 2 MB I+D on chip per core |
Tertiary Cache: | 24 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 32 |
# and size of DIMM: | 2 x 16384 MB |
Memory Details: | 16 GB 1Rx4 PC5-5600-U slots 2 and 4 on each socket |
Power Supply Quantity and Rating (W): | 1 x 290 |
Power Supply Details: | HPE 290W AC power supply assembly Non-hot-plug (823805-001) |
Disk Drive: | 1 x 480 GB SSD SATA |
Disk Controller: | Embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x BCM 5719 1GbE 4p BASE-T LOM Adptr |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2022 Datacenter |
OS Version: | Version 21H2 (OS Build 20348.1129) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM (build 17.0.8+9-LTS-211, mixed mode, sharing) |
JVM Command-line Options: | -server -Xmn11500m -Xms13000m -Xmx13000m -XX:+UseLargePages -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchInstr=0 -XX:AllocatePrefetchLines=4 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:ParallelGCThreads=8 -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:+UseParallelGC -XX:FreqInlineSize=2500 -XX:MinJumpTableSize=18 -XX:UseAVX=0 -XX:+UseBiasedLocking -XX:+UseHugeTLBFS -XX:+UseTransparentHugePages |
JVM Affinity: | start /AFFINITY [0xFFFF] |
JVM Instances: | 1 |
JVM Initial Heap (MB): | 13000 |
JVM Maximum Heap (MB): | 13000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U65 v1.40 (09/28/2023) |
Management Firmware Version: | 1.45 Jun 12 2023 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
BIOS Platform Configuration (RBSU):
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2 x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2019 - Version 1809 |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.11+9-LTS-194, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310 |
Serial Number: | C2QM22005V |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-HF8LX-20-1 |
Date of Calibration: | 19-Jul-2023 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.10.0-82175bac-20220817 |
Setup Description: | Unknown |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 83.9 | 25.0 |
90% | 78.6 | 24.9 |
80% | 72.0 | 24.9 |
70% | 63.0 | 25.1 |
60% | 55.0 | 24.9 |
50% | 50.2 | 24.9 |
40% | 45.4 | 25.1 |
30% | 40.6 | 25.1 |
20% | 35.6 | 24.9 |
10% | 30.2 | 25.0 |
Active Idle | 22.2 | 25.1 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 24.9 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 1,073,493 | ||
Calibration 2 | 1,071,492 | ||
Calibration 3 | 1,070,248 | ||
ssj_ops@calibrated=1,070,870 | |||
100% | 99.5% | 1,070,870 | 1,065,568 |
90% | 90.3% | 963,783 | 967,072 |
80% | 80.0% | 856,696 | 856,609 |
70% | 69.9% | 749,609 | 749,001 |
60% | 59.9% | 642,522 | 641,046 |
50% | 50.1% | 535,435 | 535,975 |
40% | 40.1% | 428,348 | 428,973 |
30% | 30.0% | 321,261 | 321,473 |
20% | 20.0% | 214,174 | 213,786 |
10% | 9.9% | 107,087 | 106,076 |
Active Idle | 0 | 0 |