Hewlett Packard Enterprise ProLiant DL20 Gen11 | SPECpower_ssj2008 = 8,515 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Nov 17, 2023 |
Hardware Availability: | Dec-2023 | Software Availability: | Jul-2023 | Publication: | Jan 17, 2024 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.6% | 1,160,448 | 106 | 10,979 |
90% | 90.0% | 1,048,813 | 99.8 | 10,505 |
80% | 79.9% | 930,896 | 93.3 | 9,977 |
70% | 69.9% | 814,693 | 85.0 | 9,589 |
60% | 60.1% | 699,731 | 76.3 | 9,173 |
50% | 50.1% | 583,806 | 67.9 | 8,592 |
40% | 39.9% | 465,061 | 59.6 | 7,801 |
30% | 29.9% | 348,432 | 52.6 | 6,629 |
20% | 19.9% | 232,000 | 45.6 | 5,084 |
10% | 10.0% | 116,275 | 37.8 | 3,077 |
Active Idle | 0 | 28.0 | 0 | |
∑ssj_ops / ∑power = | 8,515 |
Set Identifier: | sut |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL20 Gen11 |
Form Factor: | 1U |
CPU Name: | Intel Xeon E E-2488 |
CPU Characteristics: | 8-Core, 3.20 GHz, 24 MB L3 Cache |
CPU Frequency (MHz): | 3200 |
CPU(s) Enabled: | 8 cores, 1 chip, 8 cores/chip |
Hardware Threads: | 16 (2 / core) |
CPU(s) Orderable: | 1 chip |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 2 MB I+D on chip per core |
Tertiary Cache: | 24 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 32 |
# and size of DIMM: | 2 x 16384 MB |
Memory Details: | 16 GB 1Rx4 PC5-5600-U slots 2 and 4 on each socket |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) |
Disk Drive: | 1 x HPE 480GB NVMe Gen3 Mainstream Performance Read Intensive M.2 (P40513-B21) |
Disk Controller: | Embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x BCM 5719 1GbE 4p BASE-T LOM Adptr |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 15 SP4 |
OS Version: | 5.14.21-150400.22-default |
Filesystem: | XFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM (build 17.0.8+9-LTS-211, mixed mode, sharing) |
JVM Command-line Options: | -server -Xmn10500m -Xms12000m -Xmx12000m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=16 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy |
JVM Affinity: | numactl --cpunodebind=0 --localalloc |
JVM Instances: | 1 |
JVM Initial Heap (MB): | 12000 |
JVM Maximum Heap (MB): | 12000 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U65 v1.40 (10/18/2023) |
Management Firmware Version: | 1.45 Jun 12 2023 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | None |
BIOS Platform Configuration (RBSU):
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 G9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 Standard - V6.3 9600 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_144-b01 (build 25.144-b01, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GB53023 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-HF8LX-40-1 |
Date of Calibration: | 20-Jul-2023 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.10.0-82175bac-20220817 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 106 | 21.2 |
90% | 99.8 | 21.1 |
80% | 93.3 | 21.4 |
70% | 85.0 | 22.1 |
60% | 76.3 | 22.1 |
50% | 67.9 | 22.2 |
40% | 59.6 | 22.2 |
30% | 52.6 | 22.2 |
20% | 45.6 | 22.6 |
10% | 37.8 | 22.2 |
Active Idle | 28.0 | 22.2 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
210V / 60 Hz / 1 phase / 2 wires | 21.1 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 1,175,178 | ||
Calibration 2 | 1,164,988 | ||
Calibration 3 | 1,165,420 | ||
ssj_ops@calibrated=1,165,204 | |||
100% | 99.6% | 1,165,204 | 1,160,448 |
90% | 90.0% | 1,048,684 | 1,048,813 |
80% | 79.9% | 932,163 | 930,896 |
70% | 69.9% | 815,643 | 814,693 |
60% | 60.1% | 699,122 | 699,731 |
50% | 50.1% | 582,602 | 583,806 |
40% | 39.9% | 466,082 | 465,061 |
30% | 29.9% | 349,561 | 348,432 |
20% | 19.9% | 233,041 | 232,000 |
10% | 10.0% | 116,520 | 116,275 |
Active Idle | 0 | 0 |