SPECpower_ssj2008 Copyright (C) 2007-2021 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL380 Gen10 Plus SPECpower_ssj2008 = 11,735 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: May 31, 2021 Publication: Jun 30, 2021 Hardware Availability: May-2021 Software Availability: Apr-2021 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.8% | 8,125,401 | 619 | 13,122 90% | 90.0% | 7,329,022 | 576 | 12,731 80% | 80.1% | 6,521,541 | 464 | 14,058 70% | 70.1% | 5,709,919 | 405 | 14,087 60% | 60.0% | 4,884,337 | 354 | 13,802 50% | 50.0% | 4,076,051 | 314 | 12,984 40% | 40.0% | 3,257,608 | 281 | 11,608 30% | 30.1% | 2,448,696 | 253 | 9,661 20% | 20.0% | 1,625,704 | 226 | 7,195 10% | 10.0% | 811,409 | 198 | 4,107 Active Idle | 0 | 127 | 0 sum of ssj_ops / sum of power = | 11,735 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL380 Gen10 Plus Form Factor: 2U CPU Name: Intel Xeon Platinum 8380 2.30 GHz CPU Characteristics: 40 core, 2.30 GHz, 60 MB L3 Cache CPU Frequency (MHz): 2300 CPU(s) Enabled: 80 cores, 2 chips, 40 cores/chip Hardware Threads: 160 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 48 KB D on chip per core Secondary Cache: 1280 KB I+D on chip per core Tertiary Cache: 60 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 256 # and size of DIMM: 16 x 16384 MB Memory Details: 16GB 2Rx8 PC4-3200-T; slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket (P06031-B21) Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: HPE 800W (96%) Flex Slot Titanium Hot Plug Power Supply Kit (865438-B21) Disk Drive: HPE 480GB SATA 6G SSD (P40502-B21) Disk Controller: Embedded SATA # and type of Network Interface 1 x Intel Ethernet Adapter I350T4 OCPv3 Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Windows Server 2019 Datacenter OS Version: Version 1809 (Build 17763.1697) Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.11+9-LTS-194, mixed mode) JVM Command-line Options: -server -Xmn1700m -Xms1950m -Xmx1950m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [3,C,30,C0,300,C00,3000,C000,30000,C0000,300 000,C00000,3000000,C000000,30000000,C0000000 ,300000000,C00000000,3000000000,C000000000] JVM Instances: 80 JVM Initial Heap (MB): 1950 JVM Maximum Heap (MB): 1950 JVM Address Bits: 64 Boot Firmware Version: U46 v1.42 (05/16/2021) Management Firmware Version: 2.42 Apr 05 2021 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: KB4598230 Boot Firmware Settings BIOS Platform Configuration (RBSU): * USB Support: All USB Ports Disabled * Memory Patrol Scrubbing: Disabled * Memory Bus Frequency: 2400 MHz * Power Regulator: OS Control * Intel Turbo Boost Technology: Disabled * Energy Performance Bias: Balanced Power * Intel DMI Link Frequency: Gen 1 Speed * NUMA Group Size Optimization: Clustered * Intel Performance Monitoring Support: Disabled * Sub-NUMA Clustering: Enabled SNC2 (2-clusters) * HW Prefetcher: Disabled * Adjacent Sector Prefetch: Disabled * DCU Stream Prefetcher: Disabled * XPT Prefetcher: Enabled * Maximum PCI Express Speed: PCIe Generation 1.0 Management Firmware Settings See SUT Notes System Under Test Notes * Benchmark started via PSExec * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * SPECpower_ssj.props input.load_level.number_warehouses set to 160 due to a known inconsistency in processor reporting with this Java version * OS tunes: * Windows Power Options = Power Saver * Turn off Display = 1 Minute * Turn off hard disk = 1 Minute * Minimum Processor State=0% * Maximum Processor State=96% * Applied protection against speculative execution * N/A: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. * The system ROM used for this result contains Intel microcode version 00000000A002000D for the Intel Xeon Platinum 8380 processor. Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2 x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_221-b11 (build 25.221-b11, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT310 Serial Number: C2QM22002V Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-FQ7PK-100-1 Date of Calibration: 16-Jun-2020 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.2-3976349f-20201208 Setup Description: SUT Power Supplies 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 619 | 25.8 90% | 576 | 25.9 80% | 464 | 26.1 70% | 405 | 26.1 60% | 354 | 26.0 50% | 314 | 26.0 40% | 281 | 26.0 30% | 253 | 26.0 20% | 226 | 25.9 10% | 198 | 25.8 Active Idle | 127 | 25.8 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 25.8 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20210601-01103-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 8,139,096 Calibration 2 | | | 8,135,518 Calibration 3 | | | 8,155,465 ssj_ops@calibrated=8,145,492 100% | 99.8% | 8,145,492 | 8,125,401 90% | 90.0% | 7,330,942 | 7,329,022 80% | 80.1% | 6,516,393 | 6,521,541 70% | 70.1% | 5,701,844 | 5,709,919 60% | 60.0% | 4,887,295 | 4,884,337 50% | 50.0% | 4,072,746 | 4,076,051 40% | 40.0% | 3,258,197 | 3,257,608 30% | 30.1% | 2,443,647 | 2,448,696 20% | 20.0% | 1,629,098 | 1,625,704 10% | 10.0% | 814,549 | 811,409 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20210601-01103.WIN-OGTMANGUPLT.txt) for additional details. Copyright (C) 2007-2021 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]