SPECpower_ssj2008 Copyright (C) 2007-2018 Standard Performance Evaluation Corporation Inspur Corporation Inspur NF5180M5 SPECpower_ssj2008 = 12,167 overall ssj_ops/watt Test Sponsor: Inspur Corporation SPEC License #: 3358 Tested By: Inspur Corporation Test Location: JINAN, CHINA Test Date: May 29, 2018 Publication: Aug 1, 2018 Hardware Availability: Mar-2018 Software Availability: Jan-2015 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.7% | 5,802,662 | 458 | 12,656 90% | 90.0% | 5,235,248 | 406 | 12,897 80% | 80.0% | 4,656,565 | 342 | 13,607 70% | 69.9% | 4,068,712 | 283 | 14,388 60% | 59.9% | 3,485,289 | 249 | 13,977 50% | 50.0% | 2,910,350 | 216 | 13,478 40% | 40.1% | 2,330,889 | 193 | 12,068 30% | 29.9% | 1,742,179 | 169 | 10,292 20% | 20.0% | 1,164,312 | 141 | 8,261 10% | 10.1% | 585,602 | 119 | 4,911 Active Idle | 0 | 51.3 | 0 sum of ssj_ops / sum of power = | 12,167 System Under Test Set: 'sut' Set Identifier: sut Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node. HARDWARE Hardware Vendor: Inspur Corporation Model: Inspur NF5180M5 Form Factor: 1U CPU Name: Intel Xeon Platinum 8176 CPU 2.10 GHz (Intel Turbo Boost Technology up to 2.80 GHz) CPU Characteristics: 28-Core, 2.1GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2100 CPU(s) Enabled: 56 cores, 2 chips, 28 cores/chip Hardware Threads: 112 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per chip Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16 GB Memory Details: 12 x 16GB 2Rx8 PC4-2666V ECC RDIMM;slots CPU0_C0D0,CPU0_C1D0, CPU0_C2D0, CPU0_C3D0, CPU0_C4D0, CPU0_C5D0, CPU1_C0D0,CPU1_C1D0, CPU1_C2D0, CPU1_C3D0, CPU1_C4D0, CPU1_C5D0 populated Power Supply Quantity and Rating None (W): Power Supply Details: Delta DPS-800AB-9X P/N:V07LP0400000000F Disk Drive: Intel SSD DC S3500 Series 6Gb/s 80G PN:ZMHD1000018 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x Intel I350 Cards (NICs) Installed: NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Balanced Power" power plan) Operating System (OS): Microsoft Windows Servers 2012 R2 Standard OS Version: Version 6.3.9600 Build 9600 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM)64-Bit Server VM(build 24.80-b11,mixed mode),version 1.7.0_80 JVM Command-line Options: -server -Xmn1300m -Xms1550m -Xmx1550m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: start /NODE [0,2] /AFFINITY [3,C,30,C0,C000,30000,C0000,30000000,C000000 0,300000000,C00000000,C0000000000,3000000000 00,C00000000000];start /NODE [1,3] /AFFINITY [3,C,30,3000,C000,30000,C0000,30000000,C0000 000,300000000,30000000000,C0000000000,300000 000000,C00000000000] JVM Instances: 56 JVM Initial Heap (MB): 1550 JVM Maximum Heap (MB): 1550 JVM Address Bits: 64 Boot Firmware Version: 4.0.2 Management Firmware Version: 3.3.0 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: Applied the OS patches: KB4056898, update system FW by:http://en.inspur.com/inspur/495255/494903 /2412331/index.html Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Prefetcher = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Onboard USB Controllers = Disabled" in BIOS * Set "Turbo mode = enabled" in BIOS * Set "IMC (Integrated memory controller) Interleaving 1-way" in BIOS * Set "Sub NUMA Cluster (SNC) = Enable" in BIOS * Set "Energy Performance BIAS = Balanced Power" in BIOS * Set "Enhanced Halt State (C1E) = Enabled" in BIOS * Set "Intel Virtualization Technology = Disabled" in BIOS Management Firmware Settings none System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Minimum Processor State:0%. * Maximum Processor State:100%. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. * Each JVM instance was affinitized to 2 logical processors * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented Controller System HARDWARE Hardware Vendor: Inspur Corporation Model: Inspur VIT P3400 CPU Description: Intel Core i5-4210m Memory amount (GB): 4 SOFTWARE Operating System (OS): Windows 7 JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11,mixed mode), version 1.7.0_80 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT310E Serial Number: C3TA11005E Connectivity: RS-232 Input Connection: Default Metrology Institute: China National Accreditation Service for Conformity Assessment (CNAS) Accredited by: Calibration and Testing Center of CEPREI Calibration Label: QDCT170324337-28 Date of Calibration: 27-Jul-2017 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: Connected to PSU 0 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: placed in front the main airflow inlet of the SUT less than 50mm. Notes SPECpower_ssj.props input.load_level.number_warehouses set to 112 due to a known inconsistency in processor reporting with this Java version Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 458 | 21.3 90% | 406 | 22.1 80% | 342 | 22.3 70% | 283 | 22.3 60% | 249 | 22.1 50% | 216 | 22.0 40% | 193 | 22.1 30% | 169 | 22.2 20% | 141 | 22.3 10% | 119 | 22.5 Active Idle | 51.3 | 22.6 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 21.3 | 57 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20180606-00820-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 5,879,599 Calibration 2 | | | 5,809,926 Calibration 3 | | | 5,826,444 ssj_ops@calibrated=5,818,185 100% | 99.7% | 5,818,185 | 5,802,662 90% | 90.0% | 5,236,367 | 5,235,248 80% | 80.0% | 4,654,548 | 4,656,565 70% | 69.9% | 4,072,730 | 4,068,712 60% | 59.9% | 3,490,911 | 3,485,289 50% | 50.0% | 2,909,093 | 2,910,350 40% | 40.1% | 2,327,274 | 2,330,889 30% | 29.9% | 1,745,456 | 1,742,179 20% | 20.0% | 1,163,637 | 1,164,312 10% | 10.1% | 581,819 | 585,602 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20180606-00820.WIN-6MS7P2M15GR.txt) for additional details. Copyright (C) 2007-2018 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]