SPECpower_ssj2008 Copyright (C) 2007-2017 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL560 Gen10 SPECpower_ssj2008 = 12,120 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Oct 10, 2017 Publication: Oct 25, 2017 Hardware Availability: Oct-2017 Software Availability: Apr-2015 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.7% | 11,725,627 | 944 | 12,424 90% | 90.0% | 10,580,169 | 851 | 12,427 80% | 80.0% | 9,411,437 | 716 | 13,151 70% | 70.1% | 8,241,170 | 598 | 13,779 60% | 60.0% | 7,056,523 | 510 | 13,845 50% | 50.0% | 5,876,594 | 431 | 13,621 40% | 40.1% | 4,709,344 | 373 | 12,614 30% | 30.0% | 3,527,435 | 324 | 10,895 20% | 20.0% | 2,352,157 | 277 | 8,498 10% | 10.0% | 1,173,811 | 228 | 5,154 Active Idle | 0 | 82.9 | 0 sum of ssj_ops / sum of power = | 12,120 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL560 Gen10 Form Factor: 2U CPU Name: Intel Xeon Platinum 8180 2.50GHz CPU Characteristics: 28-Core, 2.50 GHz, 38.5MB L3 Cache CPU Frequency (MHz): 2500 CPU(s) Enabled: 112 cores, 4 chips, 28 cores/chip Hardware Threads: 224 (2 / core) CPU(s) Orderable: 1,2,3,4 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 24 x 8192 MB Memory Details: 24 x 8 GB 2Rx8 PC4-2666V-R: slots 1, 3, 5, 8, 10, 12 populated in each socket Power Supply Quantity and Rating 2 x 800 (W): Power Supply Details: HPE DPS-800AB-35 A 96% (865438-B21) Disk Drive: 1 x HPE 240GB SATA 6G M.2 2280 SSD (875488-B21) Disk Controller: 1 x HPE Smart Array S100i SR Gen10 # and type of Network Interface 1 x HPE Ethernet 1Gb 2-port 332T Adapter Cards (NICs) Installed: (615732-B21) NICs Enabled in Firmware / OS / 2/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Windows Server 2012 R2 Datacenter OS Version: Version 6.3 (Build 9600) Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=28 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: start /NODE [0,1,2,3,4,5,6,7] /AFFINITY [FFFFFFF] JVM Instances: 8 JVM Initial Heap (MB): 21000 JVM Maximum Heap (MB): 21000 JVM Address Bits: 64 Boot Firmware Version: U34 v1.22 09/29/2017 Management Firmware Version: 1.15 Aug 03 2017 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * USB Control: All USB Ports Disabled * USB Boot Support: Disabled * Internal SD Card Slot: Disabled * SR-IOV: Disabled * VT-D: Disabled * VT-x: Disabled * x2APIC: Disabled * Memory Refresh Rate: 1x Refresh * Memory Patrol Scrubbing: Disabled * Memory Bus Frequency: 2400 MHz * Power Regulator: OS Control * Energy Performance Bias: Balanced Power * Turbo Boost Technology: Disabled * Collaborative Power Control: Disabled * DMI Link Frequency: Gen 1 * Performance Monitoring Support: Disabled * Sub-NUMA Clustering: Enabled * Intel NIC DMA Channels (IOAT): Disabled * HW Prefetcher: Disabled * Adjacent Sector Prefetch: Disabled * DCU Stream Prefetcher: Disabled * DCU IP Prefetcher: Disabled * LLC Prefetcher: Disabled * XPT Prefetcher: Enabled * UPI Link Frequency: Min UPI Speed * Maximum PCI Express Speed: PCIe Generation 1.0 * Embedded SATA Configuration: Smart Array SW RAID Support * HPE Ethernet 1Gb 4-port 331FLR Adapter: Disabled * Embedded SATA Controller #1: Disabled * Redundant Power Supply Mode: Balanced * AHS PCI Logging Level: Minimal Logging Management Firmware Settings See SUT Notes System Under Test Notes * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark started via PSExec * SPECpower_ssj.props input.load_level.number_warehouses set to 224 to detect the full number of available processors on the SUT * Windows Power Options = Balanced * Turn off Display = 1 Minute * Turn off hard disk = 1 Minute * System Cooling = Passive * Processor power management: Minimum Processor State = 0% Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2 x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_91-b15 (build 25.91-b15, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB45372 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-D0562-180-1 Date of Calibration: 18-Apr-2017 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: Connected to SUT Power Supply 1 and 2 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 944 | 24.2 90% | 851 | 24.1 80% | 716 | 23.6 70% | 598 | 23.4 60% | 510 | 23.3 50% | 431 | 23.3 40% | 373 | 23.4 30% | 324 | 23.4 20% | 277 | 23.4 10% | 228 | 23.2 Active Idle | 82.9 | 23.2 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 210V / 60 Hz / 1 phase / | 23.2 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20171010-00790-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 11,752,804 Calibration 2 | | | 11,759,174 Calibration 3 | | | 11,757,292 ssj_ops@calibrated=11,758,233 100% | 99.7% | 11,758,233 | 11,725,627 90% | 90.0% | 10,582,409 | 10,580,169 80% | 80.0% | 9,406,586 | 9,411,437 70% | 70.1% | 8,230,763 | 8,241,170 60% | 60.0% | 7,054,940 | 7,056,523 50% | 50.0% | 5,879,116 | 5,876,594 40% | 40.1% | 4,703,293 | 4,709,344 30% | 30.0% | 3,527,470 | 3,527,435 20% | 20.0% | 2,351,647 | 2,352,157 10% | 10.0% | 1,175,823 | 1,173,811 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20171010-00790.WIN-3JGUKDAIHE0.txt) for additional details. Copyright (C) 2007-2017 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]