| Dell Inc. PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) | SPECpower_ssj2008 = 11,423 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, TX, USA | Test Date: | May 3, 2016 |
| Hardware Availability: | Mar-2016 | Software Availability: | Apr-2015 | Publication: | May 25, 2016 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.7% | 3,513,207 | 272 | 12,898 |
| 90% | 90.6% | 3,193,932 | 238 | 13,434 |
| 80% | 79.9% | 2,815,997 | 205 | 13,737 |
| 70% | 70.0% | 2,466,992 | 181 | 13,610 |
| 60% | 60.1% | 2,117,682 | 163 | 12,954 |
| 50% | 49.9% | 1,760,573 | 150 | 11,712 |
| 40% | 40.0% | 1,410,312 | 136 | 10,365 |
| 30% | 30.0% | 1,056,888 | 120 | 8,826 |
| 20% | 20.0% | 704,701 | 102 | 6,899 |
| 10% | 10.0% | 351,163 | 84.8 | 4,139 |
| Active Idle | 0 | 44.6 | 0 | |
| ∑ssj_ops / ∑power = | 11,423 | |||
| Set Identifier: | sut |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | PowerEdge R730 |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) |
| Form Factor: | 2U |
| CPU Name: | Intel Xeon E5-2699 v4 2.20 GHz |
| CPU Characteristics: | 22 core, 2.20 GHz, 55 MB L3 Cache |
| CPU Frequency (MHz): | 2200 |
| CPU(s) Enabled: | 44 cores, 2 chips, 22 cores/chip |
| Hardware Threads: | 88 (2 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 55 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 128 |
| # and size of DIMM: | 8 x 16 GB |
| Memory Details: | 16GB 2Rx8 PC4-2400T ECC; Dell p/n HNDJ7, Slots A1-4,B1-4 populated. |
| Power Supply Quantity and Rating (W): | 1 x 750 |
| Power Supply Details: | Dell p/n KNHJV |
| Disk Drive: | 1 x 120 GB SATA SSD, Dell p/n KX83R |
| Disk Controller: | Native Chipset SATA |
| # and type of Network Interface Cards (NICs) Installed: | 1 x quad-port Broadcom 5720, Dell P/N FM487 |
| NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Power saver power plan in OS |
| Operating System (OS): | Microsoft Windows Server 2012 R2 Datacenter |
| OS Version: | Version 6.3.9600.17196 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 |
| JVM Command-line Options: | -server -Xmx13g -Xms13g -Xmn11g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=22 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=9000 -XX:MaxInlineSize=270 -XX:FreqInlineSize=6000 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+AggressiveOpts -XX:+OptimizeStringConcat -XX:+UseStringCache |
| JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [0x3FFFFF] |
| JVM Instances: | 4 |
| JVM Initial Heap (MB): | 13000 |
| JVM Maximum Heap (MB): | 13000 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 2.1.4 |
| Management Firmware Version: | 2.30.30.30 |
| Workload Version: | SSJ 1.2.10 |
| Director Location: | Controller |
| Other Software: | none |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc |
| Model: | PowerEdge R410 |
| CPU Description: | Intel Xeon E5160, 3.00 GHz |
| Memory amount (GB): | 8.0 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Hotspot(TM) Client VM, version 1.8.0_73 |
| CCS Version: | 1.2.6 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Meters and Instruments Corporation |
| Model: | WT210 |
| Serial Number: | 91K308530 |
| Connectivity: | RS-232 |
| Input Connection: | Default |
| Metrology Institute: | NIST |
| Accredited by: | SIMCO |
| Calibration Label: | 6995453 |
| Date of Calibration: | 6-Jul-2015 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.8.0-efc0c004-20160120 |
| Setup Description: | Connected to power supply |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 25 mm in front of SUT main airflow intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 272 | 20.6 |
| 90% | 238 | 20.8 |
| 80% | 205 | 20.9 |
| 70% | 181 | 20.9 |
| 60% | 163 | 20.8 |
| 50% | 150 | 20.8 |
| 40% | 136 | 20.7 |
| 30% | 120 | 20.7 |
| 20% | 102 | 20.6 |
| 10% | 84.8 | 20.4 |
| Active Idle | 44.6 | 20.3 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 208V / 60 Hz / 1 phase / 2 wires | 20.3 | 255 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 3,543,160 | ||
| Calibration 2 | 3,524,113 | ||
| Calibration 3 | 3,525,663 | ||
| ssj_ops@calibrated=3,524,888 | |||
| 100% | 99.7% | 3,524,888 | 3,513,207 |
| 90% | 90.6% | 3,172,399 | 3,193,932 |
| 80% | 79.9% | 2,819,910 | 2,815,997 |
| 70% | 70.0% | 2,467,422 | 2,466,992 |
| 60% | 60.1% | 2,114,933 | 2,117,682 |
| 50% | 49.9% | 1,762,444 | 1,760,573 |
| 40% | 40.0% | 1,409,955 | 1,410,312 |
| 30% | 30.0% | 1,057,466 | 1,056,888 |
| 20% | 20.0% | 704,978 | 704,701 |
| 10% | 10.0% | 352,489 | 351,163 |
| Active Idle | 0 | 0 | |