SPECpower_ssj2008 Copyright (C) 2007-2016 Standard Performance Evaluation Corporation Dell Inc. PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) SPECpower_ssj2008 = 10,802 overall ssj_ops/watt Test Sponsor: Dell Inc. SPEC License #: 55 Tested By: Dell Inc. Test Location: Round Rock, TX, USA Test Date: Mar 28, 2016 Publication: Apr 15, 2016 Hardware Availability: Mar-2016 Software Availability: Apr-2015 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.4% | 3,341,589 | 269 | 12,429 90% | 90.4% | 3,038,834 | 236 | 12,852 80% | 79.7% | 2,679,252 | 205 | 13,098 70% | 69.6% | 2,340,874 | 182 | 12,844 60% | 60.0% | 2,016,068 | 166 | 12,180 50% | 50.0% | 1,680,601 | 152 | 11,040 40% | 40.1% | 1,347,418 | 138 | 9,735 30% | 30.0% | 1,009,827 | 122 | 8,263 20% | 19.9% | 670,112 | 105 | 6,367 10% | 10.0% | 337,218 | 88.4 | 3,815 Active Idle | 0 | 44.9 | 0 sum of ssj_ops / sum of power = | 10,802 System Under Test Set: 'sut' Set Identifier: sut Set Description: System Under Test # of Identical Nodes: 1 Comment: PowerEdge R730 HARDWARE Hardware Vendor: Dell Inc. Model: PowerEdge R730 (Intel Xeon E5-2699 v4 2.20 GHz) Form Factor: 2U CPU Name: Intel Xeon E5-2699 v4 2.20 GHz CPU Characteristics: 22 core, 2.20 GHz, 55 MB L3 Cache CPU Frequency (MHz): 2200 CPU(s) Enabled: 44 cores, 2 chips, 22 cores/chip Hardware Threads: 88 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 55 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 128 # and size of DIMM: 8 x 16 GB Memory Details: 16GB 2Rx8 PC4-2400T ECC; Dell p/n HNDJ7, Slots A1-4,B1-4 populated. Power Supply Quantity and Rating 1 x 750 (W): Power Supply Details: Dell p/n KNHJV Disk Drive: 1 x 120 GB SATA SSD, Dell p/n KX83R Disk Controller: Native Chipset SATA # and type of Network Interface 1 x quad-port Broadcom 5720, Dell P/N FM487 Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Power saver power plan in OS Operating System (OS): Microsoft Windows Server 2012 R2 Datacenter OS Version: Version 6.3.9600.17196 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Java HotSpot 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmx1024m -Xms1024m -Xmn800m -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:ParallelGCThreads=4 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+OptimizeStringConcat -XX:+UseStringCache -XX:+AggressiveOpts JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [0x3,0xC,0x30,0xC0,0x300,0xC00,0x3000,0xC000 ,0x30000,0xC0000,0x300000] JVM Instances: 44 JVM Initial Heap (MB): 1024 JVM Maximum Heap (MB): 1024 JVM Address Bits: 64 Boot Firmware Version: 2.0.1 Management Firmware Version: 2.30.30.30 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: none Boot Firmware Settings * Cluster on Die Snoop mode * QPI Speed set to 6.4GT/s * Adjacent Cache Line Prefetch disabled * Hardware Prefetcher disabled * DCU Streamer Prefetcher disabled * Logical Processor Idling disabling * System Profile set to Custom * CPU Power Management set to System DBPM (DAPC) * Turbo Boost disabled * Energy Efficient Turbo disabled * C1E enabled * C States set to Autonomous * Memory DDR Freq Limit set to Max Performance * Memory Patrol Scrub set to disabled * Memory Refresh Rate set to 1x * Memory Operating Voltage set to Auto * Collaborative CPU Performance Control enabled * Energy Efficient Policy set to Energy Efficient * Uncore Frequency set to Dynamic * Monitor/Mwait enabled Management Firmware Settings * 285W User Defined Power Cap Policy System Under Test Notes * Each JVM instance was bound to 2 logical processors * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark * Run initiated via Windows Remote Desktop Connection * Hard Disk set to turn off after 1 minute * Display set to turn off after 1 minute * Power Saver Power Plan Minimum processor state set to 0% * Maximum processor state set to 100% * SPECpower_ssj.props input.load_level.number_warehouses set to 88 due to a known inconsistency in processor reporting with this Java version. * BIOS.SysProfileSettings.PowerSaver enabled via racadm Controller System HARDWARE Hardware Vendor: Dell Inc Model: PowerEdge R410 CPU Description: Intel Xeon E5160, 3.00 GHz Memory amount (GB): 8.0 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise Edition Service Pack 1 JVM Vendor: Oracle Corporation JVM Version: Hotspot(TM) Client VM, version 1.8.0_73 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT210 Serial Number: 91K308530 Connectivity: RS-232 Input Connection: Default Metrology Institute: NIST Accredited by: SIMCO Calibration Label: 6995453 Date of Calibration: 6-Jul-2015 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.0-efc0c004-20160120 Setup Description: Connected to power supply TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.10.26.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 25 mm in front of SUT main airflow intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 269 | 20.8 90% | 236 | 20.9 80% | 205 | 20.9 70% | 182 | 20.9 60% | 166 | 20.9 50% | 152 | 20.9 40% | 138 | 20.8 30% | 122 | 20.8 20% | 105 | 20.7 10% | 88.4 | 20.6 Active Idle | 44.9 | 20.5 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 20.5 | 255 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20160328-00719-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 3,375,414 Calibration 2 | | | 3,392,299 Calibration 3 | | | 3,332,626 ssj_ops@calibrated=3,362,463 100% | 99.4% | 3,362,463 | 3,341,589 90% | 90.4% | 3,026,216 | 3,038,834 80% | 79.7% | 2,689,970 | 2,679,252 70% | 69.6% | 2,353,724 | 2,340,874 60% | 60.0% | 2,017,478 | 2,016,068 50% | 50.0% | 1,681,231 | 1,680,601 40% | 40.1% | 1,344,985 | 1,347,418 30% | 30.0% | 1,008,739 | 1,009,827 20% | 19.9% | 672,493 | 670,112 10% | 10.0% | 336,246 | 337,218 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20160328-00719.WIN-MPQ8LHUV8BS.txt) for additional details. Copyright (C) 2007-2016 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]