| Dell Inc. PowerEdge 2950 III (Intel Xeon E5440) | SPECpower_ssj2008 = 682 overall ssj_ops/watt | ||||
| Test Sponsor: | Dell Inc. | SPEC License #: | 55 | Test Method: | Single Node |
| Tested By: | Dell Inc. | Test Location: | Round Rock, Texas, USA | Test Date: | Nov 21, 2007 |
| Hardware Availability: | Nov-2007 | Software Availability: | Oct-2007 | Publication: | Dec 11, 2007 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.7% | 305,413 | 276 | 1,105 |
| 90% | 90.3% | 276,648 | 270 | 1,025 |
| 80% | 80.1% | 245,357 | 262 | 937 |
| 70% | 70.3% | 215,440 | 253 | 851 |
| 60% | 60.1% | 184,267 | 243 | 758 |
| 50% | 49.7% | 152,157 | 230 | 660 |
| 40% | 40.1% | 122,745 | 217 | 565 |
| 30% | 30.2% | 92,575 | 204 | 454 |
| 20% | 20.0% | 61,277 | 189 | 324 |
| 10% | 10.2% | 31,319 | 173 | 182 |
| Active Idle | 0 | 157 | 0 | |
| ∑ssj_ops / ∑power = | 682 | |||
| Set Identifier: | sut |
| Set Description: | PowerEdge 2950 III (Intel Xeon E5440) |
| # of Identical Nodes: | 1 |
| Comment: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge 2950 III (Intel Xeon E5440) |
| Form Factor: | -- |
| CPU Name: | Intel Xeon E5440 |
| CPU Characteristics: | 1333 MHz system bus |
| CPU Frequency (MHz): | 2833 |
| CPU(s) Enabled: | 8 cores, 2 chips, 4 cores/chip |
| Hardware Threads: | 8 (1 / core) |
| CPU(s) Orderable: | 1,2 chips |
| Primary Cache: | 32KB I + 32KB D on chip per core |
| Secondary Cache: | 12 MB I+D on chip per chip, 6 MB shared / 2 cores |
| Tertiary Cache: | None |
| Other Cache: | None |
| Memory Amount (GB): | 16 |
| # and size of DIMM: | 4x4096MB |
| Memory Details: | DDR2-667 CL5 FBDIMM; slots 1, 3, 5, 7 populated |
| Power Supply Quantity and Rating (W): | 1 x 750 |
| Power Supply Details: | Dell P/N Y8132 |
| Disk Drive: | 1 x 73GB 10K RPM 2.5" SAS |
| Disk Controller: | SAS 6iR |
| # and type of Network Interface Cards (NICs) Installed: | 2 x onboard gigabit |
| NICs Enabled in Firmware / OS / Connected: | 2/2/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | KVM |
| Mouse: | KVM |
| Monitor: | KVM |
| Optical Drives: | Yes |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (Server Balanced Power and Performance) |
| Operating System (OS): | Microsoft Windows Server 2003 R2 Enterprise x64 Edition |
| OS Version: | Service Pack 2 |
| Filesystem: | NTFS |
| JVM Vendor: | BEA Systems, Inc. |
| JVM Version: | BEA JRockit(R) 6 P27.4.0-10 (build P27.4.0-10-90053-1.6.0_02-20071009-1827-windows-x86_64) |
| JVM Command-line Options: | -Xms3700m -Xns3200m -Xmx3700m -XXaggressive -XXthroughputcompaction -XXlazyunlocking -XXcallprofiling -Xgc:genpar -XXgcthreads=2 -XXtlasize:min=4k,preferred=512k |
| JVM Affinity: | start /affinity [03,0c,30,c0] |
| JVM Instances: | 8 |
| JVM Initial Heap (MB): | 3700 |
| JVM Maximum Heap (MB): | 3700 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | -- |
| Management Firmware Version: | -- |
| Workload Version: | SSJ 0.23 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Dell Inc. |
| Model: | PowerEdge 1950 |
| CPU Description: | Intel Xeon 5160 |
| Memory amount (GB): | 4 |
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows 2003 Server Enterprise Edition |
| JVM Vendor: | BEA Systems, Inc. |
| JVM Version: | JRockit(R) 1.6.0_02 build R26.4.0-63 (32-bit) |
| CCS Version: | 0.21 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa Electric International Pte. Ltd. |
| Model: | WT210 |
| Serial Number: | 91G643889 |
| Connectivity: | RS-232 |
| Input Connection: | -- |
| Calibration Institute: | NIST |
| Accredited by: | Yokogawa |
| Calibration Label: | 07-1458 |
| Date of Calibration: | 24-Oct-2007 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 0.21-2f7044de |
| Setup Description: | -- |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 3.20.0.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | -- |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 276 | 23.0 |
| 90% | 270 | 23.0 |
| 80% | 262 | 23.0 |
| 70% | 253 | 23.0 |
| 60% | 243 | 23.0 |
| 50% | 230 | 23.0 |
| 40% | 217 | 23.0 |
| 30% | 204 | 23.0 |
| 20% | 189 | 23.0 |
| 10% | 173 | 22.9 |
| Active Idle | 157 | 22.9 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 120V / 60 Hz / 1 phase / 2 wires | 22.9 | 250 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 302,915 | ||
| Calibration 2 | 306,655 | ||
| Calibration 3 | 306,248 | ||
| ssj_ops@calibrated=306,452 | |||
| 100% | 99.7% | 306,452 | 305,413 |
| 90% | 90.3% | 275,807 | 276,648 |
| 80% | 80.1% | 245,161 | 245,357 |
| 70% | 70.3% | 214,516 | 215,440 |
| 60% | 60.1% | 183,871 | 184,267 |
| 50% | 49.7% | 153,226 | 152,157 |
| 40% | 40.1% | 122,581 | 122,745 |
| 30% | 30.2% | 91,936 | 92,575 |
| 20% | 20.0% | 61,290 | 61,277 |
| 10% | 10.2% | 30,645 | 31,319 |
| Active Idle | 0 | 0 | |