SPECint95

Intel Corporation

XXpress Deskside (100MHz)

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.


SPECint95 3.33
SPECint_base95 3.33

Benchmark # and Name Reference Time Base Run Time Base SPEC Ratio Peak Run Time Peak SPEC Ratio
099.go 460011813.8911813.89
124.m88ksim 19005783.295783.29
126.gcc 17004883.494883.49
129.compress 18006132.946132.94
130.li 19005163.695163.69
132.ijpeg 240010652.2510652.25
134.perl 19004764.004764.00
147.vortex 27007713.507713.50
SPECint_base95 3.33
SPECint95 3.33

Tester Information:
SPEC License #: 14
Tested By: Intel
Test Date: May-96
Hardware Avail: Jun-95
Software Avail: Mar-96

Hardware Information:
Model Name: XXpress
CPU: 100MHz Pentium processor
FPU: Integrated
Number of CPU(s): 1
Primary Cache: 8KBI+8KBD
Secondary Cache: 1MB(I+D)
Other Cache: None
Memory: 64MB(70ns fast page)
Disk Subsystem: 2x973MB Seagate ST 31250W
Other Hardware: AIC 7870 PCI (onboard)

Software Information:
Operating System: UnixWare 2.0, UnixWare SDK
Compiler: Intel C Reference Compiler 2.3
File System: UFS (/tmp as 8MB /tmpfs)
System State: Single User (root + killall)

Notes:

Base and peak flags are the same and use Feedback Directed Optimization
Pass1: -tp p5 -ipo -prof_gen -ircdb_dir /tmp/IRCDB -dn
Pass2: -tp p5 -ipo -prof_use -ircdb_dir /tmp/IRCDB -dn
-ircdb_dir is a location flag and not an optimization flag
Portability: 124: -DSYSV -DLEHOST 130, 134, 147: -lm  132: -DSYSV  126: -lm -lc -L/usr/ucblib -lucb -lmalloc
Two processor module; 2nd processor disabled with UnixWare "psradm" command


Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

webmaster@specbench.org
Tue Jun 25 9:17:26 PDT 1996

First published at SPEC.org on 25-Jun-1996


Copyright (c) 1996 Standard Performance Evaluation Corporation