# Document Title: example-medium.cfg # Subject: SPEC CPU2000 Example Config file (Medium complexity) # Last updated: 16 Dec 1999 4:40pm jh # ------------------------------------------------------------------------ # This is an example CPU2000 config file. It does not use many advanced # features of the tools, but it does illustrate a config file that has # sufficient information to support a SPEC submission for both integer # and floating point results, including all hardware and software # information needed for the full disclosures. # # This config file was actually used in a SPEC CPU2000 submission in # November, 1999, and is unchanged from that submission with the # exception of comments and a fix to tester_name. #> SPEC CPU2000 tuning for ev67 #> J. Henning 12 Nov 99 #> #> Comments that start with "#>" are "protected comments" -- i.e. #> they do not get included in the rawfile's version of this config #> file. Use protected comments for proprietary information. # When adding information to be printed in the "notes" section of # of a full disclosure, notice that note numbers are used as: # notes0nn base optimization # notes1nn - 3nn peak optimization # notes8nn portability # notes9nn testbed special characteristics # In the interests of accuracy and maintainability, each of # these notes sections are kept as close as possible to the things # that they describe. ##################################################################### # System Under Test (SUT) Section # If it affects performance, you need to describe it, either # in the pre-defined fields or by adding it to the notes section. ####################################################################### # System Description hw_avail = Feb-2000 hw_model = AlphaServer DS20E Model 6/667 machine_name = AlphaServer DS20E Model 6/667 hw_memory = 2GB (16x128MB) hw_disk = 3x4GB hw_other = Ethernet hw_vendor = Compaq Computer Corporation company_name = Compaq Computer Corporation # CPU description # Note ncpu = number enabled; ncpuorder = valid numbers of CPUs # to order for this model hw_cpu = Alpha 21264A hw_cpu_mhz = 667 hw_fpu = Integrated hw_ncpu = 1 hw_ncpuorder = 1 to 2 hw_parallel = No hw_pcache = 64KB(I)+64KB(D) on chip hw_scache = 8MB off chip hw_tcache = None hw_ocache = None # Tester description - edit the date, put your license number here! test_date = Nov-1999 license_num = 2 prepared_by = Compaq NH tester_name = Compaq NH # Operating system, file system sw_os = Tru64 UNIX V4.0F sw_file = ufs sw_state = Multi-user # Special notes # If you have notes to add, put them here, starting with number # 900. For example, you could remove the comment marks below if # you were using the referenced patch kit. # #sw_os2 = UNIX V4.0F Patch Kit 1 #notes900 = #notes901 = Information on UNIX V4.0F Patch Kit 1 is available at #notes902 = http://ftp1.service.digital.com/public/unix/v4.0f/ # OS Date # Use the "sw_avail" line here only if the OS you are testing ships # later than the compilers (and then comment out their availability # dates, below!) Notice that the field "sw_avail" occurs 3 times # in this file, but only one should be used on a given run: # # 1. the OS date (if later than the compilers), or # 2. the Integer compiler date (later of C, C++), or # 3. the FP compiler date (latest of C, Fortran, KAP C, KAP Fortran) # sw_avail = ####################################################################### # End of SUT section # If this config file were to be applied to several SUTs, edits would # be needed only ABOVE this point. ###################################################################### ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" ext = nov14a output_format = asc table = 0 teeout = no teerunout = yes tune = all ###################################################################### # Compiler selection, versions, and dates. # C is used in both CINT2000 and CFP2000, so its information appears # under # default=default=default=default: # whereas C++ is used only for integer and is described only under # int=default=default=default: # and Fortran is used only for fp. # # When setting the date, please see the comments above under "OS Date". # Remember, it's the LAST compiler in a set whose date should be listed. default=default=default=default: sw_compiler = Compaq C X6.2-259-449AT CC = cc -v int=default=default=default: sw_avail = Feb-2000 sw_compiler2 = DIGITAL C++ V6.1-029-408B6 CXX = cxx -v fp=default=default=default: sw_avail = Feb-2000 sw_compiler2 = Compaq Fortran T5.3 (ft2+) sw_compiler3 = /usr/bin/f77: fort (not fort90) sw_compiler4 = KAP Fortran V4.2 sw_compiler5 = KAP C 4.0 FC = kf90 -v ####################################################################### # Integer Baseline Optimization # notes0xx are used for baseline tuning description int=base=default=default: notes000 = Baseline C : cc -v -arch ev6 -fast GEMFB ONESTEP notes001 = C++: cxx -v -arch ev6 -O2 ONESTEP notes002 = notes003 = GEMFB: fdo_pre0 = mkdir /tmp/pb; rm -f /tmp/pb/${baseexe}* notes004 = PASS1_CFLAGS = -prof_gen_noopt -prof_dir /tmp/pb notes005 = PASS2_CFLAGS = -prof_use_feedback -prof_dir /tmp/pb notes006 = (base uses directory /tmp/pb; peak uses /tmp/pp) notes007 = OPTIMIZE = -v -arch ev6 COPTIMIZE = -fast CXXOPTIMIZE = -O2 ONESTEP = yes fdo_pre0 = mkdir /tmp/pb; rm -f /tmp/pb/${baseexe}* PASS1_CFLAGS = -prof_gen_noopt -prof_dir /tmp/pb PASS2_CFLAGS = -prof_use_feedback -prof_dir /tmp/pb 252.eon=base=default=default: # Turn feedback off for eon fdo_pre0 = ####################################################################### # Integer Peak # notes10x are used for peak tuning description, followed by the # actual benchmark numbers (e.g. notes253 and (if needed) notes253_1 # for perlbmk) int=peak=default=default: notes100 = Peak: cc [except eon: cxx] -v -arch ev6 ONESTEP plus: OPTIMIZE = -v -arch ev6 ONESTEP = yes # GEM Feedback - turn off in individual benchmark if not needed. fdo_pre0 = mkdir /tmp/pp; rm -f /tmp/pp/${baseexe}* PASS1_CFLAGS = -prof_gen_noopt -prof_dir /tmp/pp PASS2_CFLAGS = -prof_use_feedback -prof_dir /tmp/pp 164.gzip=peak=default=default: notes164 = 164.gzip: -g3 -fast -O4 +GEMFB COPTIMIZE = -g3 -fast -O4 175.vpr=peak=default=default: notes175 = 175.vpr: -g3 -fast -O4 +GEMFB COPTIMIZE = -g3 -fast -O4 176.gcc=peak=default=default: notes176 = 176.gcc: -g3 -fast -O4 -xtaso_short +GEMFB COPTIMIZE = -g3 -fast -O4 -xtaso_short 181.mcf=peak=default=default: notes181 = 181.mcf: -g3 -fast -xtaso_short +GEMFB COPTIMIZE = -g3 -fast -xtaso_short 186.crafty=peak=default=default: notes186 = 186.crafty: -g3 -fast -O4 -inline speed COPTIMIZE = -g3 -fast -O4 -inline speed fdo_pre0 = PASS1_CFLAGS = PASS2_CFLAGS = 197.parser=peak=default=default: notes197 = 197.parser: -g3 -fast -O4 -xtaso_short +GEMFB COPTIMIZE = -g3 -fast -O4 -xtaso_short 252.eon=peak=default=default: #>avoid -g3 because of CXXC_BUGS note 7204 notes252 = 252.eon: -O2 CXXOPTIMIZE = -O2 fdo_pre0 = 253.perlbmk=peak=default=default: notes253 = 253.perlbmk: -g3 -fast +GEMFB COPTIMIZE = -g3 -fast 254.gap=peak=default=default: notes254 = 254.gap: -g3 -fast -O4 +GEMFB COPTIMIZE = -g3 -fast -O4 255.vortex=peak=default=default: notes255 = 255.vortex: -g3 -fast +GEMFB COPTIMIZE = -g3 -fast 256.bzip2=peak=default=default: notes256 = 256.bzip2: -g3 -fast -O4 +GEMFB COPTIMIZE = -g3 -fast -O4 300.twolf=peak=default=default: notes300 = 300.twolf: -g3 -fast -O4 +GEMFB COPTIMIZE = -g3 -fast -O4 ####################################################################### # Floating point Baseline Optimization # notes0xx are used for baseline tuning description fp=base=default=default: notes000 = Baseline C: cc -v -arch ev6 -fast -O4 ONESTEP notes001 = Fortran: kf90 -v -arch ev6 -O5 -fkapargs='-ur=-1' ONESTEP notes002 = OPTIMIZE = -v -arch ev6 COPTIMIZE = -fast -O4 FOPTIMIZE = -O5 -fkapargs='-ur=1' ONESTEP = yes ####################################################################### # Floating Point Peak # notes10x are used for peak tuning description, followed by the # actual benchmark numbers (e.g. notes253 and notes253_1 for perlbmk) fp=peak=default=default: notes100 = Peak: -v -g3 -arch ev6 -non_shared ONESTEP plus: OPTIMIZE = -v -g3 -arch ev6 -non_shared ONESTEP = yes 168.wupwise=peak=default=default: notes168 = 168.wupwise: f77 -fast -O4 -pipeline -unroll 2 F77OPTIMIZE = -fast -O4 -pipeline -unroll 2 F77 = f77 171.swim=peak=default=default: notes171 = 171.swim: f90 -fast -O5 -transform_loops F77OPTIMIZE = -fast -O5 -transform_loops F77 = f90 172.mgrid=peak=default=default: notes172 = 172.mgrid: kf77 -O5 -transform_loops -tune ev6 -unroll 8 F77OPTIMIZE = -O5 -transform_loops -tune ev6 -unroll 8 F77 = kf77 173.applu=peak=default=default: notes173 = 173.applu: f77 -fast -O5 -transform_loops -unroll 14 F77OPTIMIZE = -fast -O5 -transform_loops -unroll 14 F77 = f77 177.mesa=peak=default=default: notes177 = 177.mesa: cc -fast -O4 COPTIMIZE = -fast -O4 CC = cc 178.galgel=peak=default=default: notes178 = 178.galgel: kf90 -O4 -unroll 2 -ldxml FOPTIMIZE = -O4 -unroll 2 -ldxml notes178_1 = RM_SOURCES = lapak.f90 RM_SOURCES = lapak.f90 FC = kf90 179.art=peak=default=default: notes179 = 179.art: kcc -fast -O4 -ckapargs='-arl=4 -ur=4' -unroll 10 COPTIMIZE = -fast -O4 -ckapargs='-arl=4 -ur=4' -unroll 10 CC = kcc 183.equake=peak=default=default: notes183 = 183.equake: kcc -fast -ckapargs='-arl=4' -xtaso_short COPTIMIZE = -fast -ckapargs='-arl=4' -xtaso_short CC = kcc 187.facerec=peak=default=default: notes187 = 187.facerec: f90 -fast -O4 FOPTIMIZE = -fast -O4 FC = f90 188.ammp=peak=default=default: notes188 = 188.ammp: cc -fast -O4 -xtaso_short COPTIMIZE = -fast -O4 -xtaso_short CC = cc 189.lucas=peak=default=default: notes189 = 189.lucas: kf90 -fast -O5 -fkapargs='-ur=1' -unroll 1 FOPTIMIZE = -fast -O5 -fkapargs='-ur=1' -unroll 1 FC = kf90 191.fma3d=peak=default=default: notes191 = 191.fma3d: kf90 -O4 FOPTIMIZE = -O4 FC = kf90 200.sixtrack=peak=default=default: notes200 = 200.sixtrack: f90 -fast -O5 -transform_loops F77OPTIMIZE = -fast -O5 -transform_loops F77 = f90 301.apsi=peak=default=default: notes301 = 301.apsi: kf90 -O5 -transform_loops -unroll 8 -fkapargs='-ur=1' F77OPTIMIZE = -O5 -transform_loops -unroll 8 -fkapargs='-ur=1' F77 = kf90 ####################################################################### # Integer Portability # notes8xx are used for portability int=default=default=default: notes800 = notes801 = Portability: gcc: -Dalloca=__builtin_alloca; crafty: -DALPHA notes802 = perlbmk: -DSPEC_CPU2000_DUNIX; vortex: -DSPEC_CPU2000_LP64 notes803 = gap: -DSYS_HAS_CALLOC_PROTO -DSYS_IS_BSD -DSYS_HAS_IOCTL_PROTO -DSPEC_CPU2000_LP64 176.gcc=default=default=default: EXTRA_CFLAGS= -Dalloca=__builtin_alloca 186.crafty=default=default=default: EXTRA_CFLAGS = -DALPHA 253.perlbmk=default=default=default: EXTRA_CFLAGS = -DSPEC_CPU2000_DUNIX 254.gap=default=default=default: EXTRA_CFLAGS = -DSYS_HAS_CALLOC_PROTO -DSYS_IS_BSD -DSYS_HAS_IOCTL_PROTO -DSPEC_CPU2000_LP64 255.vortex=default=default=default: EXTRA_CFLAGS = -DSPEC_CPU2000_LP64 ####################################################################### # Floating point Portability # notes8xx are used for portability fp=default=default=default: notes800 = notes801 = Portability: galgel: -fixed 178.galgel=default=default=default: EXTRA_FFLAGS = -fixed ####################################################################### # End of user-supplied information. The information below is # automatically generated by the SPEC tools at compile time. # The "MD5" is a checksum that ensures that the binaries referenced # by this config file are in fact built using the options described # herein. For example, if you edit this config file to change the # optimization level for 255.vortex, the next time the file is used # the tools will notice the change and will recompile vortex. ####################################################################### __MD5__ 168.wupwise=peak=nov14a=default: # Last updated Sun Nov 14 04:49:15 1999 optmd5=6cfebb629cf395d958755f68a6c9e05b exemd5=3d51c75d1c97918bf212c4fb47a30003 183.equake=peak=nov14a=default: # Last updated Sun Nov 14 04:49:22 1999 optmd5=f3f0d2022f2be4a9530c000b1e883008 exemd5=923a7bfd6f68ccf0d6e49261fa1c2030 171.swim=peak=nov14a=default: # Last updated Sun Nov 14 04:49:35 1999 optmd5=1dd0309365e864203e384ec801246fc1 exemd5=ca33fcdf35a7dafaa4e389f642521336 179.art=peak=nov14a=default: # Last updated Sun Nov 14 04:49:37 1999 optmd5=988e3447c7b7bc695612f6b26f8f0b60 exemd5=093c9ea45a300148306f434dfadcedf9 183.equake=base=nov14a=default: # Last updated Sun Nov 14 04:49:38 1999 optmd5=e298eea3eee86487c5cb4e6c77423fb7 exemd5=db43c1e56ab0d89020e6c78c212bc653 172.mgrid=peak=nov14a=default: # Last updated Sun Nov 14 04:49:41 1999 optmd5=7c5c0de4bc0ab89c262c7c4f32d0a16f exemd5=6da92feef42b83f87ac23490f3ba4c25 171.swim=base=nov14a=default: # Last updated Sun Nov 14 04:49:42 1999 optmd5=b5c59375fd27ebd9ce228924b3b4638e exemd5=82a5a2bc0280d37f89e96919e6ad633c 179.art=base=nov14a=default: # Last updated Sun Nov 14 04:49:51 1999 optmd5=d24e4524a118e9a004d0a825d4c88815 exemd5=5a63f6cbfa6f2a4d1ae060c0079394ff 172.mgrid=base=nov14a=default: # Last updated Sun Nov 14 04:49:55 1999 optmd5=8d5cb2ad30ad46c90d55f39c07db04f9 exemd5=25b3e8f7222a34b26d353c1664d97b91 189.lucas=base=nov14a=default: # Last updated Sun Nov 14 04:50:04 1999 optmd5=8a190524932e9ee2e7ba48a04e24af70 exemd5=b22ecb280f41039a5bf4b467d3cb92ab 173.applu=base=nov14a=default: # Last updated Sun Nov 14 04:50:11 1999 optmd5=04f1ac12184ac388faf763d5132dc270 exemd5=1e46de5d212742a58b7e1b5f4f15def7 301.apsi=base=nov14a=default: # Last updated Sun Nov 14 04:50:12 1999 optmd5=3fa0454c7fdb1b1b7d484c0631b2c73e exemd5=b651c1ce888a65fc3e7921b37bc7b882 187.facerec=peak=nov14a=default: # Last updated Sun Nov 14 04:50:13 1999 optmd5=a1fb7caf7b6b86aebff89509ef02eeab exemd5=0a1a9305a1275611d211b6a6eb3900ca 173.applu=peak=nov14a=default: # Last updated Sun Nov 14 04:50:14 1999 optmd5=f0c9e7afecfb5bc91f62728af69a501c exemd5=467edfcf370967678d04eb1a88fa1bc8 301.apsi=peak=nov14a=default: # Last updated Sun Nov 14 04:50:31 1999 optmd5=30bef47b72264d3befe6c2c54b907ed1 exemd5=f74a69aaf27dcfb6ed9d76e19161105f 189.lucas=peak=nov14a=default: # Last updated Sun Nov 14 04:50:33 1999 optmd5=f4856646489cc8d3ebd539153e107162 exemd5=4e643233e86014bf168bf652edc932f9 188.ammp=peak=nov14a=default: # Last updated Sun Nov 14 04:50:36 1999 optmd5=b9d62569d3d50723ff682dd43171014b exemd5=8598377d6dae905bfee46824757d0312 188.ammp=base=nov14a=default: # Last updated Sun Nov 14 04:51:05 1999 optmd5=fa1dea51290fa02b6de39ba7470a1f2c exemd5=4bb0feced2b7875b0bb19e03bbf078e3 186.crafty=peak=nov14a=default: # Last updated Sun Nov 14 04:51:35 1999 optmd5=83b5967098960a52ce023452593dbc1a exemd5=1bd1ca5d70fb8cc92c5e28c7f448e69f 187.facerec=base=nov14a=default: # Last updated Sun Nov 14 04:52:05 1999 optmd5=e6154f7de23397b27c7ce04263dec887 exemd5=9b66701b56c46f59ebb12684312556bf 168.wupwise=base=nov14a=default: # Last updated Sun Nov 14 04:52:12 1999 optmd5=12eda531b13e060eec7d8a0d59485a19 exemd5=74f6354f9d0c1d05c6cdc1e815c226c8 178.galgel=base=nov14a=default: # Last updated Sun Nov 14 04:56:16 1999 optmd5=806823b77c97dd0998431125b3a45fc7 exemd5=9f5e00b2004107ce76ccb3e1c866e4ac 252.eon=peak=nov14a=default: # Last updated Sun Nov 14 04:56:36 1999 optmd5=108058a53b0d64bddb246462158fc656 exemd5=f7d273e567d9233da502552ecbd7c9b2 252.eon=base=nov14a=default: # Last updated Sun Nov 14 04:56:36 1999 optmd5=a42a1855dc68a1215d70a71494408d0f exemd5=f7d273e567d9233da502552ecbd7c9b2 177.mesa=base=nov14a=default: # Last updated Sun Nov 14 04:56:56 1999 optmd5=3e43a418eac64266214b9da1a37a4498 exemd5=6cbb02a0db4ad08915dbcfdbc191349f 177.mesa=peak=nov14a=default: # Last updated Sun Nov 14 04:57:08 1999 optmd5=8c3d3eee111bc13988d96a82107e32f9 exemd5=b09693f05ace106b22fed7f43a5c7425 178.galgel=peak=nov14a=default: # Last updated Sun Nov 14 04:57:25 1999 optmd5=3a2371c88c1375b1b0c56d03ae614e03 exemd5=ae49f3cadb5ac60dd6f9a1aacae467bb 181.mcf=peak=nov14a=default: # Last updated Sun Nov 14 04:57:51 1999 optmd5=df254aaec65a52b92f001f4ce25eaa1f exemd5=22787f33949f25317a15b99753e10e87 181.mcf=base=nov14a=default: # Last updated Sun Nov 14 04:58:58 1999 optmd5=1eadfd99edaa9302730716ed13a99703 exemd5=d3b1483ba3f2cac25d0fa96aa11012f5 197.parser=peak=nov14a=default: # Last updated Sun Nov 14 04:59:58 1999 optmd5=b529a90ad38d432c5d7fb554b0e1383c exemd5=3afc1095f15c0e4a0af3655b97d9c344 197.parser=base=nov14a=default: # Last updated Sun Nov 14 05:00:02 1999 optmd5=8d90694a5a686e563663465585fbab6e exemd5=ea899ae0d2713edd44fe053210d25f89 300.twolf=base=nov14a=default: # Last updated Sun Nov 14 05:02:16 1999 optmd5=aaea939ad8e79da328c3867663a9c34a exemd5=90f77e0bbbf16290fab27acf146ca552 191.fma3d=base=nov14a=default: # Last updated Sun Nov 14 05:02:32 1999 optmd5=3fefd0e111bbb000107de61583f7a059 exemd5=7a4840ae81e922b02f600fde8b7863ee 300.twolf=peak=nov14a=default: # Last updated Sun Nov 14 05:02:52 1999 optmd5=39cf18dfb670deac81f83dbc42aaa596 exemd5=f179075a1ed7b09b1e9c678ceac6e34c 254.gap=base=nov14a=default: # Last updated Sun Nov 14 05:03:07 1999 optmd5=0223210791a2768fc43a5dc22ad18534 exemd5=8ca1e5aea169ab7c6f4f07e2fc26cd5a 191.fma3d=peak=nov14a=default: # Last updated Sun Nov 14 05:03:24 1999 optmd5=cffbc3d2bf4d3b05a68e5eb55e4b6eea exemd5=b3b692384e243fcfe77382ef0691d753 175.vpr=peak=nov14a=default: # Last updated Sun Nov 14 05:03:47 1999 optmd5=96dd9fa3063b287ae222d2314d4c8b6b exemd5=596ca2e9ff3fea105c59d21ceacf88c7 254.gap=peak=nov14a=default: # Last updated Sun Nov 14 05:03:53 1999 optmd5=ccb079760f45a8aedc7a3fdfbd30d8e2 exemd5=bfdb2d00f4d62ad3cec55a45ffbee194 175.vpr=base=nov14a=default: # Last updated Sun Nov 14 05:04:06 1999 optmd5=a2069b8ad93f7a42e21f489ffbc96ab7 exemd5=16e6f6a469e8a356b8ffc82ea73e77ef 200.sixtrack=peak=nov14a=default: # Last updated Sun Nov 14 05:04:09 1999 optmd5=502863d7ba15a55698512b51aba29e18 exemd5=9df0d1ef0c2232c0838572b0f682ff67 186.crafty=base=nov14a=default: # Last updated Sun Nov 14 05:04:11 1999 optmd5=30e4b0052c6088896b07cc801f1082da exemd5=bacb0b8f44cc989eb3373056154dc448 200.sixtrack=base=nov14a=default: # Last updated Sun Nov 14 05:05:23 1999 optmd5=41fa7a313f39e585712212e2cfd68510 exemd5=d6ed447f3d80fe73cd3a6a8ebf9035f1 164.gzip=peak=nov14a=default: # Last updated Sun Nov 14 05:05:41 1999 optmd5=a3baa4c1ed14d3e2d446d48b85814d16 exemd5=b9607f468175ecb6c475814411a10904 256.bzip2=peak=nov14a=default: # Last updated Sun Nov 14 05:05:41 1999 optmd5=f664c81b73e5da9307bee484d637f4e2 exemd5=c8fd65197f22373348d660fe5edcdaba 255.vortex=base=nov14a=default: # Last updated Sun Nov 14 05:05:47 1999 optmd5=db144f8afe7aa3a0106d7c3ea6cce6cb exemd5=0698d1b263b15a72e7ffceb2c4f45271 176.gcc=base=nov14a=default: # Last updated Sun Nov 14 05:05:53 1999 optmd5=0d9d6f8ad935aba18c2464450cc6665f exemd5=324278028948d7e83d2986c019fd4699 255.vortex=peak=nov14a=default: # Last updated Sun Nov 14 05:05:55 1999 optmd5=8e32723a3dace5c11560971a83f62018 exemd5=0dd1a3fa27b71633e7bed05f2bac88c7 164.gzip=base=nov14a=default: # Last updated Sun Nov 14 05:05:58 1999 optmd5=81b46ae1d3e3cbfc770dbf525f27bec8 exemd5=9c0c3877bf911961ed62d956926de3c3 176.gcc=peak=nov14a=default: # Last updated Sun Nov 14 05:06:10 1999 optmd5=52966c7fd6a49f3261de7860e125829b exemd5=85bd61c6c0afd4dfa58b58263e61cc06 256.bzip2=base=nov14a=default: # Last updated Sun Nov 14 05:06:19 1999 optmd5=a27093713a0432e72803f598ff17fdef exemd5=76b69e58ecaeb6a617fe819ebffaa72e 253.perlbmk=base=nov14a=default: # Last updated Sun Nov 14 05:20:06 1999 optmd5=797be06230ba0afa2149a27e469a9aae exemd5=e0e69e19c8922876f6669389f8cc4c76 253.perlbmk=peak=nov14a=default: # Last updated Sun Nov 14 05:20:12 1999 optmd5=c9e082d7e16ccc4801f4a94bd9bd7a26 exemd5=44da7653b7d6ecf42ff9edf282a5d385 ####################################################################### # End of automatically-generated information, and end of file. ####################################################################### ############################################################################# # Copyright (C) 1999-2000 Standard Performance Evaluation Corporation # All Rights Reserved #############################################################################