MPI2007 Flag Description
SGI SGI Altix ICE 8200EX (Intel Xeon X5570, 2.93 GHz)
Copyright © 2006 Intel Corporation. All Rights Reserved.
Base Optimization Flags
-
- -O3
![[user]](http://www.spec.org/auto/mpi2007/flags/user.png)
- COPTIMIZE
-
Enables O2 optimizations plus more aggressive optimizations,
such as prefetching, scalar replacement, and loop and memory
access transformations. Enables optimizations for maximum speed,
such as:
- Loop unrolling, including instruction scheduling
- Code replication to eliminate branches
- Padding the size of certain power-of-two arrays to allow
more efficient cache use.
On IA-32 and Intel EM64T processors, when O3 is used with options
-ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler
performs more aggressive data dependency analysis than for O2, which
may result in longer compilation times.
The O3 optimizations may not cause higher performance unless loop and
memory access transformations take place. The optimizations may slow
down code in some cases compared to O2 optimizations.
The O3 option is recommended for applications that have loops that heavily
use floating-point calculations and process large data sets. On IA-32
Windows platforms, -O3 sets the following:
/GF (/Qvc7 and above), /Gf (/Qvc6 and below), and /Ob2
- Includes:
-
-
- -xT
- COPTIMIZE
-
Code is optimized for Intel(R) Core(TM)2 Duo processors, Intel(R) Core(TM)2 Quad
processors and Intel(R) Xeon(R) processors with SSSE3.
The resulting code may contain unconditional use of features that are not supported
on other processors. This option also enables new optimizations in addition to
Intel processor-specific optimizations including advanced data layout and code
restructuring optimizations to improve memory accesses for Intel processors.
Do not use this option if you are executing a program on a processor that
is not an Intel processor. If you use this option on a non-compatible processor
to compile the main program (in Fortran) or the function main() in C/C++, the
program will display a fatal run-time error if they are executed on unsupported
processors.
-
- -no-prec-div
- COPTIMIZE
-
(disable/enable[default] -Qprec-div[-])
-Qprec-div improves precision of floating-point divides. It has a slight
impact on speed. -Qprec-div- disables this option and enables
optimizations that give slightly less precise results than full IEEE
division.
When you specify -Qprec-div- along with some optimizations, such as
-xN and -xB (Linux) or /QxN and /QxB (Windows),
the compiler may change floating-point division computations into multiplication
by the reciprocal of the denominator.
For example, A/B is computed as A * (1/B) to improve the speed of the
computation.
However, sometimes the value produced by this transformation is
not as accurate as full IEEE division. When it is important to have fully
precise IEEE division, do not use -Qprec-div- which will enable the
default -Qprec-div and the result is more accurate, with some
loss of performance.
-
- -O3
- CXXOPTIMIZE
-
Enables O2 optimizations plus more aggressive optimizations,
such as prefetching, scalar replacement, and loop and memory
access transformations. Enables optimizations for maximum speed,
such as:
- Loop unrolling, including instruction scheduling
- Code replication to eliminate branches
- Padding the size of certain power-of-two arrays to allow
more efficient cache use.
On IA-32 and Intel EM64T processors, when O3 is used with options
-ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler
performs more aggressive data dependency analysis than for O2, which
may result in longer compilation times.
The O3 optimizations may not cause higher performance unless loop and
memory access transformations take place. The optimizations may slow
down code in some cases compared to O2 optimizations.
The O3 option is recommended for applications that have loops that heavily
use floating-point calculations and process large data sets. On IA-32
Windows platforms, -O3 sets the following:
/GF (/Qvc7 and above), /Gf (/Qvc6 and below), and /Ob2
- Includes:
-
-
- -xT
- CXXOPTIMIZE
-
Code is optimized for Intel(R) Core(TM)2 Duo processors, Intel(R) Core(TM)2 Quad
processors and Intel(R) Xeon(R) processors with SSSE3.
The resulting code may contain unconditional use of features that are not supported
on other processors. This option also enables new optimizations in addition to
Intel processor-specific optimizations including advanced data layout and code
restructuring optimizations to improve memory accesses for Intel processors.
Do not use this option if you are executing a program on a processor that
is not an Intel processor. If you use this option on a non-compatible processor
to compile the main program (in Fortran) or the function main() in C/C++, the
program will display a fatal run-time error if they are executed on unsupported
processors.
-
- -no-prec-div
- CXXOPTIMIZE
-
(disable/enable[default] -Qprec-div[-])
-Qprec-div improves precision of floating-point divides. It has a slight
impact on speed. -Qprec-div- disables this option and enables
optimizations that give slightly less precise results than full IEEE
division.
When you specify -Qprec-div- along with some optimizations, such as
-xN and -xB (Linux) or /QxN and /QxB (Windows),
the compiler may change floating-point division computations into multiplication
by the reciprocal of the denominator.
For example, A/B is computed as A * (1/B) to improve the speed of the
computation.
However, sometimes the value produced by this transformation is
not as accurate as full IEEE division. When it is important to have fully
precise IEEE division, do not use -Qprec-div- which will enable the
default -Qprec-div and the result is more accurate, with some
loss of performance.
-
-
- -O3
- FOPTIMIZE
-
Enables O2 optimizations plus more aggressive optimizations,
such as prefetching, scalar replacement, and loop and memory
access transformations. Enables optimizations for maximum speed,
such as:
- Loop unrolling, including instruction scheduling
- Code replication to eliminate branches
- Padding the size of certain power-of-two arrays to allow
more efficient cache use.
On IA-32 and Intel EM64T processors, when O3 is used with options
-ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler
performs more aggressive data dependency analysis than for O2, which
may result in longer compilation times.
The O3 optimizations may not cause higher performance unless loop and
memory access transformations take place. The optimizations may slow
down code in some cases compared to O2 optimizations.
The O3 option is recommended for applications that have loops that heavily
use floating-point calculations and process large data sets. On IA-32
Windows platforms, -O3 sets the following:
/GF (/Qvc7 and above), /Gf (/Qvc6 and below), and /Ob2
- Includes:
-
-
- -xT
- FOPTIMIZE
-
Code is optimized for Intel(R) Core(TM)2 Duo processors, Intel(R) Core(TM)2 Quad
processors and Intel(R) Xeon(R) processors with SSSE3.
The resulting code may contain unconditional use of features that are not supported
on other processors. This option also enables new optimizations in addition to
Intel processor-specific optimizations including advanced data layout and code
restructuring optimizations to improve memory accesses for Intel processors.
Do not use this option if you are executing a program on a processor that
is not an Intel processor. If you use this option on a non-compatible processor
to compile the main program (in Fortran) or the function main() in C/C++, the
program will display a fatal run-time error if they are executed on unsupported
processors.
-
- -no-prec-div
- FOPTIMIZE
-
(disable/enable[default] -Qprec-div[-])
-Qprec-div improves precision of floating-point divides. It has a slight
impact on speed. -Qprec-div- disables this option and enables
optimizations that give slightly less precise results than full IEEE
division.
When you specify -Qprec-div- along with some optimizations, such as
-xN and -xB (Linux) or /QxN and /QxB (Windows),
the compiler may change floating-point division computations into multiplication
by the reciprocal of the denominator.
For example, A/B is computed as A * (1/B) to improve the speed of the
computation.
However, sometimes the value produced by this transformation is
not as accurate as full IEEE division. When it is important to have fully
precise IEEE division, do not use -Qprec-div- which will enable the
default -Qprec-div and the result is more accurate, with some
loss of performance.
-
- -O3
- COPTIMIZE, FOPTIMIZE
-
Enables O2 optimizations plus more aggressive optimizations,
such as prefetching, scalar replacement, and loop and memory
access transformations. Enables optimizations for maximum speed,
such as:
- Loop unrolling, including instruction scheduling
- Code replication to eliminate branches
- Padding the size of certain power-of-two arrays to allow
more efficient cache use.
On IA-32 and Intel EM64T processors, when O3 is used with options
-ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler
performs more aggressive data dependency analysis than for O2, which
may result in longer compilation times.
The O3 optimizations may not cause higher performance unless loop and
memory access transformations take place. The optimizations may slow
down code in some cases compared to O2 optimizations.
The O3 option is recommended for applications that have loops that heavily
use floating-point calculations and process large data sets. On IA-32
Windows platforms, -O3 sets the following:
/GF (/Qvc7 and above), /Gf (/Qvc6 and below), and /Ob2
- Includes:
-
-
- -xT
- COPTIMIZE, FOPTIMIZE
-
Code is optimized for Intel(R) Core(TM)2 Duo processors, Intel(R) Core(TM)2 Quad
processors and Intel(R) Xeon(R) processors with SSSE3.
The resulting code may contain unconditional use of features that are not supported
on other processors. This option also enables new optimizations in addition to
Intel processor-specific optimizations including advanced data layout and code
restructuring optimizations to improve memory accesses for Intel processors.
Do not use this option if you are executing a program on a processor that
is not an Intel processor. If you use this option on a non-compatible processor
to compile the main program (in Fortran) or the function main() in C/C++, the
program will display a fatal run-time error if they are executed on unsupported
processors.
-
- -no-prec-div
- COPTIMIZE, FOPTIMIZE
-
(disable/enable[default] -Qprec-div[-])
-Qprec-div improves precision of floating-point divides. It has a slight
impact on speed. -Qprec-div- disables this option and enables
optimizations that give slightly less precise results than full IEEE
division.
When you specify -Qprec-div- along with some optimizations, such as
-xN and -xB (Linux) or /QxN and /QxB (Windows),
the compiler may change floating-point division computations into multiplication
by the reciprocal of the denominator.
For example, A/B is computed as A * (1/B) to improve the speed of the
computation.
However, sometimes the value produced by this transformation is
not as accurate as full IEEE division. When it is important to have fully
precise IEEE division, do not use -Qprec-div- which will enable the
default -Qprec-div and the result is more accurate, with some
loss of performance.
Base Other Flags
-
- -lmpi
- EXTRA_LIBS
-
MPI library.
-
- EXTRA_LIBS
-
MPI library.
-
- -lmpi
- EXTRA_LIBS
-
MPI library.
-
- -lmpi
- EXTRA_LIBS
-
MPI library.
Implicitly Included Flags
This section contains descriptions of flags that were included implicitly
by other flags, but which do not have a permanent home at SPEC.
-
-
-
- -Ob_n
-
Specifies the level of inline function expansion.
Ob0 - Disables inlining of user-defined functions. Note that
statement functions are always inlined.
Ob1 - Enables inlining when an inline keyword or an inline
attribute is specified. Also enables inlining according
to the C++ language.
Ob2 - Enables inlining of any function at the compiler's
discretion.
-
- -O2
-
Enables optimizations for speed. This is the generally recommended
optimization level. This option also enables:
- Inlining of intrinsics
- Intra-file interprocedural optimizations, which include:
- inlining
- constant propagation
- forward substitution
- routine attribute propagation
- variable address-taken analysis
- dead static function elimination
- removal of unreferenced variables
- The following capabilities for performance gain:
- constant propagation
- copy propagation
- dead-code elimination
- global register allocation
- global instruction scheduling and control speculation
- loop unrolling
- optimized code selection
- partial redundancy elimination
- strength reduction/induction variable simplification
- variable renaming
- exception handling optimizations
- tail recursions
- peephole optimizations
- structure assignment lowering and optimizations
- dead store elimination
On IA-32 Windows platforms, -O2 sets the following:
/Og, /Oi-, /Os, /Oy, /Ob2, /GF (/Qvc7 and above), /Gf (/Qvc6
and below), /Gs, and /Gy.
- Includes:
-
-
-
-
-
-
-
- -O1
-
Enables optimizations for speed and disables some optimizations that
increase code size and affect speed.
To limit code size, this option:
- Enables global optimization; this includes data-flow analysis,
code motion, strength reduction and test replacement, split-lifetime
analysis, and instruction scheduling.
- Disables intrinsic recognition and intrinsics inlining.
The O1 option may improve performance for applications with very large
code size, many branches, and execution time not dominated by code within loops.
On IA-32 Windows platforms, -O1 sets the following:
/Qunroll0, /Oi-, /Op-, /Oy, /Gy, /Os, /GF (/Qvc7 and above),
/Gf (/Qvc6 and below), /Ob2, and /Og
- Includes:
-
-
Platform settings
One or more of the following settings may have been set. If so, the "General Notes" section of the
report will say so; and you can read below to find out more about what these settings mean.
Hardware Prefetch:
This BIOS option allows the enabling/disabling of a processor mechanism to
prefetch data into the cache according to a pattern-recognition algorithm.
In some cases, setting this option to Disabled may improve
performance. Users should only disable this option
after performing application benchmarking to verify improved
performance in their environment.
Adjacent Sector Prefetch:
This BIOS option allows the enabling/disabling of a processor mechanism to
fetch the adjacent cache line within an 128-byte sector that contains
the data needed due to a cache line miss.
In some cases, setting this option to Disabled may improve
performance. Users should only disable this option
after performing application benchmarking to verify improved
performance in their environment.
ulimit -s
Sets the stack size to n kbytes, or unlimited to allow the stack size
to grow without limit.
submit= MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; /usr/bin/taskset \$MYMASK $command
When running multiple copies of benchmarks, the SPEC config file feature
submit is sometimes used to cause individual jobs to be bound to
specific processors. This specific submit command is used for Linux.
The description of the elements of the command are:
- /usr/bin/taskset [options] [mask] [pid | command [arg] ... ]:
taskset is used to set or retreive the CPU affinity of a running
process given its PID or to launch a new COMMAND with a given CPU
affinity. The CPU affinity is represented as a bitmask, with the
lowest order bit corresponding to the first logical CPU and highest
order bit corresponding to the last logical CPU. When the taskset
returns, it is guaranteed that the given program has been scheduled
to a legal CPU.
The default behaviour of taskset is to run a new command with a
given affinity mask:
taskset [mask] [command] [arguments]
- $MYMASK: The bitmask (in hexadecimal) corresponding to a specific
SPECCOPYNUM. For example, $MYMASK value for the first copy of a
rate run will be 0x00000001, for the second copy of the rate will
be 0x00000002 etc. Thus, the first copy of the rate run will have a
CPU affinity of CPU0, the second copy will have the affinity CPU1
etc.
- $command: Program to be started, in this case, the benchmark instance
to be started.
Intel(R) MPI Library 3.1 for Linux* options and environment variables
Job starup command flags
-perhost <# of processes>
Use this option to place the indicated number of consecutive
MPI processes on every host in group round robin fashion. The number
of processes to start is controlled by the option -n as usual.
-n <# of processes> or -np <# of processes>
Use this option to set the number of MPI processes to run the current arg-set.
-genv <ENVVAR> <value>
Use this option to set the <ENVVAR> environment variable
to the specified <value> for all MPI processes.
Environment variables
I_MPI_DEVICE=<device>[:<provider>]
Select the particular network fabric to be used.
sock - Sockets
shm - Shared-memory only (no sockets)
ssm - Combined sockets + shared memory
(for clusters with SMP nodes)
rdma - RDMA-capable network fabrics including InfiniBand*,
Myrinet* (via DAPL*)
rdssm - Combined sockets + shared memory + DAPL*
(for clusters with SMP nodes and RDMA-capable network fabrics)
I_MPI_FALLBACK_DEVICE=(enable|disable)
Set this environment variable to enable fallback to the available
fabric. It is valid only for rdssm and rdma modes.
Fall back to the shared memory and/or socket fabrics
if initialization of the DAPL* fabric fails.
This is the default value.
Terminate the job if the fabric selected by the I_MPI_DEVICE
environment variable cannot be initialized.
For questions about the meanings of these flags, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright 2006-2010 Standard Performance Evaluation Corporation
Tested with SPEC MPI2007 v1.1.
Report generated on Tue Jul 22 13:35:31 2014 by SPEC MPI2007 flags formatter v1445.
![[benchmark]](http://www.spec.org/auto/mpi2007/flags/benchmark.png)
![[suite]](http://www.spec.org/auto/mpi2007/flags/suite.png)