MPI2007 Flag Description
AMD, QLogic Corporation, Rackable Systems, IWILL AMD Emerald Cluster: AMD Opteron CPUs, QLogic InfiniPath/SilverStorm Interconnect

Base Optimization Flags

C benchmarks

• • -march=opteron
  • 
  • CC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -Ofast
  • 
  • COPTIMIZE

  • Equivalent to -O3 -ipa -OPT:Ofast -fno-math-errno -ffast-math.
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations.

    NOTE: -Ofast enables -ipa (inter-procedural analysis), which places limitations on how libraries and .o files are built.

  • Includes:
    • -O3
    • -ipa
    • -OPT:Ofast
      • -OPT:ro
      • -OPT:Olimit
      • -OPT:div_split
      • -OPT:alias
    • -fno-math-errno
    • -ffast-math

C++ benchmarks

126.lammps

• • -march=opteron
  • 
  • CXX, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -O3
  • 
  • CXXOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • CXXOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -CG:local_fwd_sched=on
  • 
  • CXXOPTIMIZE

  • -CG:local_fwd_sched : Change the instruction scheduling algorithm to work forward instead of backward for the instructions in each basic block. The default is OFF for 64-bit ABI, and ON for 32-bit ABI.

Fortran benchmarks

107.leslie3d

• • -march=opteron
  • 
  • FC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -O3
  • 
  • FOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • FOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -OPT:malloc_alg=1
  • 
  • FOPTIMIZE

  • -OPT:malloc_alg=(0|1)
    Select an alternate malloc algorithm which may improve speed. The compiler adds setup code in the C/C++/Fortran "main" function to enable the chosen algorithm. The default is 0.

• • -LANG:copyinout=off
  • 
  • FOPTIMIZE

  • -LANG:copyinout : When an array section is passed as the actual argument in a call, the compiler sometimes copies the array section to a temporary array and passes the temporary array, thus promoting locality in the accesses to the array argu- ment. This optimization is relevant only to Fortran, and this flag controls the aggressiveness of this optimization. The default is ON for -O2 or higher and OFF otherwise.

113.GemsFDTD

• • -march=opteron
  • 
  • FC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -O3
  • 
  • FOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • FOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -OPT:malloc_alg=1
  • 
  • FOPTIMIZE

  • -OPT:malloc_alg=(0|1)
    Select an alternate malloc algorithm which may improve speed. The compiler adds setup code in the C/C++/Fortran "main" function to enable the chosen algorithm. The default is 0.

• • -LANG:copyinout=off
  • 
  • FOPTIMIZE

  • -LANG:copyinout : When an array section is passed as the actual argument in a call, the compiler sometimes copies the array section to a temporary array and passes the temporary array, thus promoting locality in the accesses to the array argu- ment. This optimization is relevant only to Fortran, and this flag controls the aggressiveness of this optimization. The default is ON for -O2 or higher and OFF otherwise.

115.fds4

• • -march=opteron
  • 
  • FC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -O3
  • 
  • FOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • FOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -OPT:malloc_alg=1
  • 
  • FOPTIMIZE

  • -OPT:malloc_alg=(0|1)
    Select an alternate malloc algorithm which may improve speed. The compiler adds setup code in the C/C++/Fortran "main" function to enable the chosen algorithm. The default is 0.

• • -LANG:copyinout=off
  • 
  • FOPTIMIZE

  • -LANG:copyinout : When an array section is passed as the actual argument in a call, the compiler sometimes copies the array section to a temporary array and passes the temporary array, thus promoting locality in the accesses to the array argu- ment. This optimization is relevant only to Fortran, and this flag controls the aggressiveness of this optimization. The default is ON for -O2 or higher and OFF otherwise.

129.tera_tf

• • -march=opteron
  • 
  • FC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -O3
  • 
  • FOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • FOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -OPT:malloc_alg=1
  • 
  • FOPTIMIZE

  • -OPT:malloc_alg=(0|1)
    Select an alternate malloc algorithm which may improve speed. The compiler adds setup code in the C/C++/Fortran "main" function to enable the chosen algorithm. The default is 0.

• • -LANG:copyinout=off
  • 
  • FOPTIMIZE

  • -LANG:copyinout : When an array section is passed as the actual argument in a call, the compiler sometimes copies the array section to a temporary array and passes the temporary array, thus promoting locality in the accesses to the array argu- ment. This optimization is relevant only to Fortran, and this flag controls the aggressiveness of this optimization. The default is ON for -O2 or higher and OFF otherwise.

132.zeusmp2

• • -march=opteron
  • 
  • FC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -O3
  • 
  • FOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • FOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -OPT:malloc_alg=1
  • 
  • FOPTIMIZE

  • -OPT:malloc_alg=(0|1)
    Select an alternate malloc algorithm which may improve speed. The compiler adds setup code in the C/C++/Fortran "main" function to enable the chosen algorithm. The default is 0.

• • -LANG:copyinout=off
  • 
  • FOPTIMIZE

  • -LANG:copyinout : When an array section is passed as the actual argument in a call, the compiler sometimes copies the array section to a temporary array and passes the temporary array, thus promoting locality in the accesses to the array argu- ment. This optimization is relevant only to Fortran, and this flag controls the aggressiveness of this optimization. The default is ON for -O2 or higher and OFF otherwise.

137.lu

• • -march=opteron
  • 
  • FC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -O3
  • 
  • FOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • FOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -OPT:malloc_alg=1
  • 
  • FOPTIMIZE

  • -OPT:malloc_alg=(0|1)
    Select an alternate malloc algorithm which may improve speed. The compiler adds setup code in the C/C++/Fortran "main" function to enable the chosen algorithm. The default is 0.

• • -LANG:copyinout=off
  • 
  • FOPTIMIZE

  • -LANG:copyinout : When an array section is passed as the actual argument in a call, the compiler sometimes copies the array section to a temporary array and passes the temporary array, thus promoting locality in the accesses to the array argu- ment. This optimization is relevant only to Fortran, and this flag controls the aggressiveness of this optimization. The default is ON for -O2 or higher and OFF otherwise.

Benchmarks using both Fortran and C

121.pop2

• • -march=opteron
  • 
  • CC, FC, LD

  • Compiler will optimize code for selected cpu type: opteron, athlon, athlon64, athlon64fx, em64t, pentium4, xeon, core, anyx86, auto. auto means to optimize for the platform that the compiler is running on, which the compiler determines by reading /proc/cpuinfo. anyx86 means a generic x86 processor. Under 32-bit ABI, anyx86 is a processor without SSE2/SSE3/3DNow! support; under 64-bit ABI it is a processor with SSE2 but without SSE3/3DNow!. Core refers to the Intel Core Microarchitecture, used by 64-bit CPUs such as Woodcrest. The default is opteron.

• • -Ofast
  • 
  • COPTIMIZE

  • Equivalent to -O3 -ipa -OPT:Ofast -fno-math-errno -ffast-math.
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations.

    NOTE: -Ofast enables -ipa (inter-procedural analysis), which places limitations on how libraries and .o files are built.

  • Includes:
    • -O3
    • -ipa
    • -OPT:Ofast
      • -OPT:ro
      • -OPT:Olimit
      • -OPT:div_split
      • -OPT:alias
    • -fno-math-errno
    • -ffast-math
• • -O3
  • 
  • FOPTIMIZE

  • Specify the basic level of optimization desired.
    The options can be one of the following:

    0    Turn off all optimizations.

    1    Turn on local optimizations that can be done quickly. Do peephole optimizations and instruction scheduling.

    2    Turn on extensive optimization. This is the default.
    The optimizations at this level are generally conservative, in the sense that they are virtually always beneficial and avoid changes which affect such things as floating point accuracy. In addition to the level 1 optimizations, do inner loop unrolling, if-conversion, two passes of instruction scheduling, global register allocation, dead store elimination, instruction scheduling across basic blocks, and partial redundancy elimination.

    3    Turn on aggressive optimization.
    The optimizations at this level are distinguished from -O2 by their aggressiveness, generally seeking highest-quality generated code even if it requires extensive compile time. They may include optimizations that are generally beneficial but may hurt performance.
    This includes but is not limited to turning on the Loop Nest Optimizer, -LNO:opt=1, and setting -OPT:roundoff=1:IEEE_arithmetic=2:Olimit=9000:reorg_common=ON.

    s    Specify that code size is to be given priority in tradeoffs with execution time.

    If no value is specified, 2 is assumed.

• • -OPT:Ofast
  • 
  • FOPTIMIZE

  • -OPT:Ofast
    Use optimizations selected to maximize performance. Although the optimizations are generally safe, they may affect floating point accuracy due to rearrangement of computations. This effectively turns on the following optimizations: -OPT:ro=2:Olimit=0:div_split=ON:alias=typed.

  • Includes:
    • -OPT:ro
    • -OPT:Olimit
    • -OPT:div_split
    • -OPT:alias
• • -OPT:malloc_alg=1
  • 
  • FOPTIMIZE

  • -OPT:malloc_alg=(0|1)
    Select an alternate malloc algorithm which may improve speed. The compiler adds setup code in the C/C++/Fortran "main" function to enable the chosen algorithm. The default is 0.

• • -LANG:copyinout=off
  • 
  • FOPTIMIZE

  • -LANG:copyinout : When an array section is passed as the actual argument in a call, the compiler sometimes copies the array section to a temporary array and passes the temporary array, thus promoting locality in the accesses to the array argu- ment. This optimization is relevant only to Fortran, and this flag controls the aggressiveness of this optimization. The default is ON for -O2 or higher and OFF otherwise.

127.wrf2

• • Same as 121.pop2

128.GAPgeofem

• • Same as 121.pop2

130.socorro

• • Same as 121.pop2