# Invocation command line:
# /store/hfeng/mpi2007-v2/bin/runspec --ranks 96 --reportable -I -a validate -n 3 -o asc -i lref -T base -c sgi-linux-amd-intel-sgimpi-12f-noipo.cfg large
# output_root was not used for this run
############################################################################
# Invocation command line:
# /nas/store/hfeng/mpi2007/v1.1/bin/runspec --ranks 512 --reportable -a validate -n 2 -o asc -i mref -T base -c sgi-linux-x86_64-intel-sgimpi.cfg medium
# output_root was not used for this run
############################################################################
####################################################################
#
# defaults
#
####################################################################

#flagsurl = http://www.spec.org/mpi2007/flags/EM64T_Intel101_flags.20080618.xml
flagsurl000= http://www.spec.org/mpi2007/flags/SGI_x86_64_Intel12_flags.xml
ext=sgimpi-12f-noipo
action=validate
tune=base
input=ref
teeout=no
env_vars=1
no_input_handler=null
mean_anyway=1


FC = ifort
CC = icc
CXX = icpc


####################################################################
#
# Base flags
#
####################################################################

default=default=default=default:
FOPTIMIZE = -O3 -xSSE2  -no-prec-div
COPTIMIZE = -O3 -xSSE2  -no-prec-div
CXXOPTIMIZE = -O3 -xSSE2  -no-prec-div -ansi-alias
EXTRA_LIBS = -lmpi

default=default=default=default:
use_submit_for_speed=1
submit=mpiexec_mpt -n $ranks $command
#submit=mpiexec_mpt -n $ranks dplace -s1 -c2-5,8-11 $command


####################################################################
#
# Portability flags
#
####################################################################

121.pop2=default=default=default:
CPORTABILITY = -DSPEC_MPI_CASE_FLAG

127.wrf2=default=default=default:
CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX

#104.milc=peak=default=default:
#basepeak=yes
#
#107.leslie3d=peak=default=default:
#basepeak=yes
#
#113.GemsFDTD=peak=default=default:
#ranks=192
#
#115.fds4=peak=default=default:
#ranks=696
#
#121.pop2=peak=default=default:
#basepeak=yes
#
#122.tachyon=peak=default=default:
#basepeak=yes
#
#126.lammps=peak=default=default:
#ranks=192
#
#127.wrf2=peak=default=default:
##ranks=744
#basepeak=yes
#
#128.GAPgeofem=peak=default=default:
#basepeak=yes
#
#129.tera_tf=peak=default=default:
#basepeak=yes
#
#130.socorro=peak=default=default:
#basepeak=yes
#FOPTIMIZE = -O3 -xSSE2  -no-prec-div
#COPTIMIZE = -O3 -xSSE2  -no-prec-div
#CXXOPTIMIZE = -O3 -xSSE2 -no-prec-div -ansi-alias
#RM_SOURCES=specblas.f90
##EXTRA_LIBS=-lacml -lmpi
#EXTRA_LIBS=-Wl,--start-group -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -Wl,--end-group -lmpi
#
#ranks=572

#132.zeusmp2=peak=default=default:
#ranks=528
#
#137.lu=peak=default=default:
#ranks=504

121.pop2=peak=default=default:
CPORTABILITY = -DSPEC_MPI_CASE_FLAG
ranks=2048
ENV_MPI_DSM_CPULIST=2-9,14-21:allhosts
submit=mpirun `uniq \$PBS_NODEFILE | awk '{printf ",%s", \$0}' |  sed 's/^,/ /'` 16 $command

122.tachyon=peak=default=default:
basepeak=yes

125.RAxML=peak=default=default:
basepeak=yes

126.lammps=peak=default=default:
basepeak=yes

128.GAPgeofem=peak=default=default:
ranks=2048
ENV_MPI_DSM_CPULIST=2-9,14-21:allhosts
submit=mpirun `uniq \$PBS_NODEFILE | awk '{printf ",%s", \$0}' |  sed 's/^,/ /'` 16 $command

129.tera_tf=peak=default=default:
basepeak=yes

132.zeusmp2=peak=default=default:
ranks=2048
ENV_MPI_DSM_CPULIST=2-9,14-21:allhosts
submit=mpirun `uniq \$PBS_NODEFILE | awk '{printf ",%s", \$0}' |  sed 's/^,/ /'` 16 $command

137.lu=peak=default=default:
ranks=2048
ENV_MPI_DSM_CPULIST=2-9,14-21:allhosts
submit=mpirun `uniq \$PBS_NODEFILE | awk '{printf ",%s", \$0}' |  sed 's/^,/ /'` 16 $command

142.dmilc=peak=default=default:
basepeak=yes

143.dleslie=peak=default=default:
ranks=2048
ENV_MPI_DSM_CPULIST=2-9,14-21:allhosts
submit=mpirun `uniq \$PBS_NODEFILE | awk '{printf ",%s", \$0}' |  sed 's/^,/ /'` 16 $command

145.lGemsFDTD=peak=default=default:
ranks=2048
ENV_MPI_DSM_CPULIST=2-9,14-21:allhosts
submit=mpirun `uniq \$PBS_NODEFILE | awk '{printf ",%s", \$0}' |  sed 's/^,/ /'` 16 $command

147.l2wrf2=peak=default=default:
basepeak=yes

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
hw_avail = Mar-2011
license_num = 4
sw_avail = Aug-2011
sw_base_ptrsize = 64-bit
sw_other = None
sw_peak_ptrsize = 64-bit
system_vendor = SGI
interconnect_IOMPI_purpose = MPI and I/O traffic
interconnect_IOMPI_order = 2
interconnect_IOMPI_label = InfiniBand (MPI and I/O)
interconnect_IOMPI_hw_vendor = Mellanox Technologies
interconnect_IOMPI_hw_topo = Enhanced HyperCube
interconnect_IOMPI_hw_switch_1_ports = 36
interconnect_IOMPI_hw_switch_1_model = Mellanox Infiniscale-IV
interconnect_IOMPI_hw_switch_1_firmware = 5040005
interconnect_IOMPI_hw_switch_1_data_rate = InfiniBand 4x QDR
interconnect_IOMPI_hw_switch_1_count = 1
interconnect_IOMPI_hw_model = None
test_sponsor = SGI
tester = SGI
system_class = Homogeneous
sw_preprocessors = None
sw_mpi_other = OFED 1.4.2
sw_mpi_library = SGI MPT 2.04 Patch 10789
node_compute_count = 4
node_compute_hw_adapter_IB_count = 1
node_compute_hw_adapter_IB_data_rate = InfiniBand 4x QDR
node_compute_hw_adapter_IB_driver = OFED-1.4.2
node_compute_hw_adapter_IB_firmware = 2.7.0
node_compute_hw_adapter_IB_interconnect = InfiniBand
node_compute_hw_adapter_IB_model000 = Mellanox MT26428 ConnectX IB QDR
node_compute_hw_adapter_IB_model001 = (PCIe x8 Gen2 5 GT/s)
node_compute_hw_adapter_IB_ports_used = 2
node_compute_hw_adapter_IB_slot_type = PCIe x8 Gen2
node_compute_hw_cpu_char000= 12 Cores/chip, 2.5 GHz
node_compute_hw_cpu_mhz = 2500
node_compute_hw_cpu_name = AMD Opteron 6180 SE
node_compute_hw_disk = None
node_compute_hw_memory = 64 GB (16 x 4 GB, 2Rx4 PC3-10600R-9, ECC)
node_compute_hw_model = SGI Altix ICE 8400EX (AMD Opteron 6180 SE, 2.5GHz)
node_compute_hw_nchips = 2
node_compute_hw_ncores = 24
node_compute_hw_ncoresperchip = 12
node_compute_hw_ncpuorder = 1-2 chips
node_compute_hw_nthreadspercore = 1
node_compute_hw_ocache = None
node_compute_hw_other = None
node_compute_hw_pcache = 64 KB I + 64 KB D on chip per core
node_compute_hw_scache = 512 KB I+D on chip per core
node_compute_hw_tcache = 12 MB I+D on chip per chip, 6 MB shared / 6 cores
node_compute_hw_vendor = SGI
node_compute_label = SGI Altix ICE 8400EX Compute Node
node_compute_order = 2
node_compute_purpose = compute
node_compute_sw_localfile = NFSv3
node_compute_sw_os000 = SUSE Linux Enterprise Server 11 SP1 (x86_64)
node_compute_sw_os001 = Kernel 2.6.32.27-0.2-default
node_compute_sw_other000= SGI Performance Suite 1.0,
node_compute_sw_other001 = Build 702r19.sles11-1010072114
node_compute_sw_other002 = SGI Tempo Compute Node 2.2,
node_compute_sw_other003 = Build 702r19.sles11-1010072114
node_compute_sw_sharedfile = NFSv3 IPoIB
node_compute_sw_state = Run Level 3 (Multi-User)
node_fileserver_count = 1
node_fileserver_hw_adapter_IB_count = 2
node_fileserver_hw_adapter_IB_data_rate = InfiniBand 4x DDR
node_fileserver_hw_adapter_IB_driver = OFED-1.4.2
node_fileserver_hw_adapter_IB_firmware = 5.3.0
node_fileserver_hw_adapter_IB_interconnect = InfiniBand
node_fileserver_hw_adapter_IB_model000 = Mellanox MT25208 InfiniHost III Ex
node_fileserver_hw_adapter_IB_model001 = (PCIe x8 Gen1 2.5 GT/s)
node_fileserver_hw_adapter_IB_ports_used = 2
node_fileserver_hw_adapter_IB_slot_type = PCIe x8 Gen1
node_fileserver_hw_cpu_char = 1.6GHz/8MB, 533MHz FSB
node_fileserver_hw_cpu_mhz = 1600
node_fileserver_hw_cpu_name = Intel Itanium 2 9030
node_fileserver_hw_disk000 = 16 TB RAID 5
node_fileserver_hw_disk001 = 32 x 500 GB SATA (Seagate Barracuda 7.2K)
node_fileserver_hw_memory = 24 GB (12 x 2 GB, 2Rx4 PC2-3200-3, ECC)
node_fileserver_hw_model = SGI Altix 450 (Intel Itanium 2, 1.6GHz)
node_fileserver_hw_nchips = 2
node_fileserver_hw_ncores = 4
node_fileserver_hw_ncoresperchip = 2
node_fileserver_hw_ncpuorder = 2-38 chips
node_fileserver_hw_nthreadspercore = 1
node_fileserver_hw_ocache = None
node_fileserver_hw_other = None
node_fileserver_hw_pcache = 16 KB I + 16 KB D on chip per core
node_fileserver_hw_scache = 1 MB I + 256 KB D on chip per core
node_fileserver_hw_tcache = 4 MB I+D on chip per core
node_fileserver_hw_vendor = SGI
node_fileserver_label = SGI InfiniteStorage 4000
node_fileserver_order = 3
node_fileserver_purpose = fileserver
node_fileserver_sw_localfile = xfs
node_fileserver_sw_os000 = SUSE Linux Enterprise Server 11 SP1  (ia64)
node_fileserver_sw_os001 = Kernel 2.6.32.12-0.7-default
node_fileserver_sw_other000= SGI ProPack 7SP1 for Linux,
node_fileserver_sw_other001 = Build 701r2.sles11-1005242307
node_fileserver_sw_state = Run Level 3 (Multi-User)
sw_c_compiler000 = Intel C++ Composer XE 2011 for Linux,
sw_c_compiler001 = Version 12.0.3.174 Build 20110309
sw_cxx_compiler000 = Intel C++ Composer XE 2011 for Linux,
sw_cxx_compiler001 = Version 12.0.3.174 Build 20110309
sw_f_compiler000 = Intel Fortran Composer XE 2011 for Linux,
sw_f_compiler001 = Version 12.0.3.174 Build 20110309
system_name000 = SGI Altix ICE 8400EX
system_name001 = (AMD Opteron 6180 SE, 2.5GHz)
notes_000 = Software environment:
notes_005 =   export MPI_REQUEST_MAX=65536
notes_010 =   export MPI_TYPE_MAX=32768
notes_015 =   export MPI_BUFS_THRESHOLD=1
notes_020 =   ulimit -s unlimited
notes_025 =
notes_030 = BIOS settings:
notes_035 =   AMI BIOS version 1.0a
notes_040 =
notes_045 = Job Placement:
notes_050 =   Each MPI job is assigned to a topologically compact set
notes_055 =   of nodes, i.e. the minimal needed number of switches was
notes_060 =   used for each job: 1 switch for up to 192 ranks, 2 switches
notes_065 =   for 384 ranks, 4 switches for 768 ranks, 8 switches for
notes_070 =   1536 ranks and 16 switches for 3072 ranks.