SPEC® MPIM2007 Result

QLogic, Intel, Supermicro

QDR Benchmark Cluster (QLogic TrueScale InfiniBand, Intel Xeon X5570, 2.93 GHz)

SPECmpiM_peak2007 = Not Run

SPECmpiM_base2007 = 13.6

MPI2007 license:	0018	Test date:	Jul-2009
Test sponsor:	QLogic Corporation	Hardware Availability:	Sep-2009
Tested by:	QLogic Corporation	Software Availability:	Sep-2009

Results Table

Benchmark	Base							Peak
Benchmark	Ranks	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio	Ranks	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
104.milc	64	107	14.6	106	14.8	106	14.8
107.leslie3d	64	385	13.6	385	13.6	384	13.6
113.GemsFDTD	64	277	22.7	276	22.8	277	22.8
115.fds4	64	160	12.2	160	12.2	160	12.2
121.pop2	64	360	11.5	361	11.4	360	11.5
122.tachyon	64	360	7.76	361	7.76	360	7.76
126.lammps	64	297	9.82	296	9.83	297	9.82
127.wrf2	64	365	21.4	360	21.6	365	21.4
128.GAPgeofem	64	140	14.8	140	14.8	140	14.7
129.tera_tf	64	276	10.0	276	10.0	276	10.0
130.socorro	64	233	16.4	233	16.4	232	16.5
132.zeusmp2	64	217	14.3	216	14.3	217	14.3
137.lu	64	248	14.8	250	14.7	251	14.6

Hardware Summary
Type of System:	Homogeneous
Compute Node:	Nehalem Compute Node
Interconnect:	TrueScale InfiniBand
File Server Node:	FusionSA
Total Compute Nodes:	8
Total Chips:	16
Total Cores:	64
Total Threads:	64
Total Memory:	192 GB
Base Ranks Run:	64
Minimum Peak Ranks:	--
Maximum Peak Ranks:	--

Software Summary
C Compiler:	Intel C++ Compiler 11.1 for Linux, Build 20090511
C++ Compiler:	Intel C++ Compiler 11.1 for Linux, Build 20090511
Fortran Compiler:	Intel Fortran Compiler 11.1 for Linux, Build 20090511
Base Pointers:	64-bit
Peak Pointers:	64-bit
MPI Library:	QLogic MPI 2.5
Other MPI Info:	None
Pre-processors:	No
Other Software:	None

Node Description: Nehalem Compute Node

Hardware
Number of nodes:	8
Uses of the node:	compute
Vendor:	Supermicro
Model:	X8DTi-P motherboard, CSE-815TQ-700CB chassis
CPU Name:	Intel Xeon X5570
CPU(s) orderable:	1-2 chips
Chips enabled:	2
Cores enabled:	8
Cores per chip:	4
Threads per core:	1
CPU Characteristics:	Intel Turbo Boost Technology up to 3.33 GHz, 6.4 GT/s QPI, Hyper-Threading disabled
CPU MHz:	2930
Primary Cache:	32 KB I + 32 KB D on chip per core
Secondary Cache:	256 KB I+D on chip per core
L3 Cache:	8 MB I+D on chip per chip, 8 MB shared / 4 cores
Other Cache:	None
Memory:	24 GB (RDIMM 6x4-GB, DDR3-1333 MHz)
Disk Subsystem:	Seagate 500 GB ST3500320NS
Other Hardware:	None
Adapter:	QLogic QLE7342
Number of Adapters:	1
Slot Type:	PCIe x8 Gen2
Data Rate:	InfiniBand 4x QDR
Ports Used:	1
Interconnect Type:	InfiniBand

Software
Adapter:	QLogic QLE7342
Adapter Driver:	QLogic OFED 1.4.1
Adapter Firmware:	none
Operating System:	Red Hat EL 5.3, kernel 2.6.18-128
Local File System:	Linux/ext2
Shared File System:	NFSv3 IPoIB
System State:	Multi-User
Other Software:	none

Node Description: FusionSA

Hardware
Number of nodes:	1
Uses of the node:	fileserver
Vendor:	Western Scientific
Model:	FusionSA (storage appliance) with Tyan Thunder n6650W (S2915) motherboard and LSI Logic MegaRAID SAS 8408E RAID controller
CPU Name:	Opteron 2218
CPU(s) orderable:	1-2 chips
Chips enabled:	2
Cores enabled:	4
Cores per chip:	2
Threads per core:	1
CPU Characteristics:
CPU MHz:	2600
Primary Cache:	64 KB I + 64 KB D on chip per core
Secondary Cache:	1 MB I+D on chip per chip
L3 Cache:	None
Other Cache:	None
Memory:	16 GB (8 x 2 GB PC2-5300 ECC)
Disk Subsystem:	8 x 73 GB SAS 3Gb/s 15K RPM
Other Hardware:	None
Adapter:	Mellanox MHGH28-XTC
Number of Adapters:	1
Slot Type:	PCIe x8 Gen1
Data Rate:	InfiniBand 4x DDR
Ports Used:	1
Interconnect Type:	InfiniBand

Software
Adapter:	Mellanox MHGH28-XTC
Adapter Driver:	OFED 1.3
Adapter Firmware:	2.3.0
Operating System:	Red Hat EL 4.5, 2.6.9-55.ELsmp
Local File System:	None
Shared File System:	NFSv3 IPoIB
System State:	Multi-User
Other Software:	None

Interconnect Description: TrueScale InfiniBand

Hardware
Vendor:	QLogic
Model:	QLogic 12000 Series
Switch Model:	QLogic 12800-40
Number of Switches:	1
Number of Ports:	72
Data Rate:	InfiniBand 4x QDR
Firmware:	5.0.3.0.3
Topology:	Single switch
Primary Use:	MPI traffic, File System traffic

Submit Notes

The config file option 'submit' was used.

General Notes

BIOS settings notes:
  Intel Hyper-Threading Technology (SMT): Disabled (default is Enabled)
  Intel Turbo Boost Technology (Turbo)  : Enabled (default is Enabled)



Switch notes: Enabled 4K IB MTUs and 2 Virtual Lanes with QLogic 12800-40
  switch CLI parameter setting "ismChassisSetMtu 5 3"