This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 1244 | 
|---|---|
| SPECfp_rate_base95 | 1105 | 
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio | 
|---|---|---|---|---|---|---|
| 101.tomcatv | 6 | 136 | 1473 | 6 | 133 | 1507 | 
| 102.swim | 6 | 250 | 1854 | 6 | 226 | 2053 | 
| 103.su2cor | 6 | 95.9 | 788 | 6 | 95 | 797 | 
| 104.hydro2d | 6 | 172 | 752 | 6 | 166 | 782 | 
| 107.mgrid | 6 | 118 | 1148 | 6 | 117 | 1153 | 
| 110.applu | 6 | 212 | 561 | 6 | 150 | 793 | 
| 125.turb3d | 6 | 225 | 985 | 6 | 216 | 1024 | 
| 141.apsi | 6 | 76.0 | 1493 | 6 | 75 | 1518 | 
| 145.fpppp | 6 | 407 | 1274 | 6 | 256 | 2025 | 
| 146.wave5 | 6 | 117 | 1390 | 6 | 101 | 1600 | 
| SPECfp_rate_base95 | 1105 | |||||
| SPECfp_rate95 | 1244 | |||||
Tester Information:
| SPEC License #: | 6 | 
|---|---|
| Tested By: | Sun, Palo Alto | 
| Test Date: | Sep-98 | 
| Hardware Avail: | Dec-98 | 
| Software Avail: | Oct-98 | 
Hardware Information:
| Model Name: | Sun Enterprise 3500 | 
|---|---|
| CPU: | 400MHz UltraSPARC II | 
| FPU: | Integrated | 
| Number of CPU(s): | 6 | 
| Primary Cache: | 16KBI+16KBD on chip | 
| Secondary Cache: | 4096KB(I+D) off chip | 
| Other Cache: | None | 
| Memory: | 8192MB | 
| Disk Subsystem: | 2 x 9GB | 
| Other Hardware: | FastEthernet | 
Software Information:
| Operating System: | Solaris 2.7 | 
|---|---|
| Compiler: | Sun F77 5.0 | 
| File System: | UFS | 
| System State: | Multi-User | 
| Kernel Extensions: | 
Notes:
BCOPY =  -Qoption iropt -O4+bcopy
INV =    -Qoption iropt -O4+invccexp
FULTRA = -xarch=v8plusa -xchip=ultra
Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch 
101.tomcatv: -fast ${FULTRA} -xpad=local:23 -xprefetch 
102.swim: -fast ${FULTRA} -xpad=common:15 -xprefetch -fsimple=2
103.su2cor: -fast ${FULTRA} -xvector -Qoption cg -Qms_pipe+nfll=5
103 cont: -fsimple=2 -xprefetch ${BCOPY} -lmvec 
104.hydro2d: -fast ${FULTRA} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use 
107.mgrid: -fast ${FULTRA} -xprefetch -fsimple=2 ${BCOPY}
110.applu: -fast ${FULTRA} -fsimple=2
110.cont: -Qoption iropt -O4+ddint+scalarrep+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr
125.turb3d: -fast ${FULTRA} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
141.apsi: -fast ${FULTRA} -fsimple=2 -stackvar -Qoption iropt
141 cont: -Si36 ${INV} -Qoption iropt -O4+algassoc 
145.fpppp: -fast ${FULTRA} -xO5 -xsafe=mem -fsimple=2 
145 cont: -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1 -xprofile=use 
146.wave5: -fast ${FULTRA}  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Config Version @(#)uds.cfg 1.0 98/09/03
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Mon Feb 22 10:35:47 1999First published at SPEC.org on 18-Feb-1999