SPECint95

SGI

Octane

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
099.go	4600	433	10.6	403	11.4
124.m88ksim	1900	203	9.36	168	11.3
126.gcc	1700	175	9.69	169	10.1
129.compress	1800	159	11.3	159	11.3
130.li	1900	201	9.47	198	9.59
132.ijpeg	2400	249	9.66	238	10.1
134.perl	1900	146	13.0	146	13.0
147.vortex	2700	241	11.2	240	11.2
SPECint_base95			10.5
		SPECint95			11.0

Tester Information:

SPEC License #:	04
Tested By:	SGI
Test Date:	Dec-97
Hardware Avail:	Nov-96
Software Avail:	Sep-97

Hardware Information:

Model Name:	Octane 1X 195MHz R10k
CPU:	195 MHz MIPS R10000 Processor Chip Revision: 2.7
FPU:	MIPS R10010 Floating Point Chip Revision: 0.0
Number of CPU(s):	1
Primary Cache:	32KBI + 32KBD on chip
Secondary Cache:	1MB (I+D)
Other Cache:	None
Memory:	128MB
Disk Subsystem:	1 SCSI 4.3GB
Other Hardware:	none

Software Information:

Operating System:	IRIX64 6.4
Compiler:	MIPSpro C Compiler 7.2
	IRIX Development Foundation 1.0 w/patch2687
File System:	XFS
System State:	Single-User

Notes:

Portability Flags: all: -DUSG  gcc: -I./config -Dalloca=__builtin_alloca
FEEDBACK:
.   PASS1 = -fb_create /tmp/FBDIR/$        where $ is the program name
.   PASS2 = -fb_opt /tmp/FBDIR/$           where $ is the program name
Base Flags: -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
Peak Flags:
go:       -O2 -n32 -mips4 -IPA:plimit=1000:small_pu=60:use_intrinsic \
.         -TARG:platform=ip27 -OPT:Olimit=0 -OPT:goto=off, FEEDBACK
m88ksim:  -O2 -n32 -mips4 -TARG:platform=ip27 -IPA:plimit=4000:space=100:small_pu=90:use_intrinsic \
.         -OPT:Olimit=0:fast_bit_intrinsics=on:ro=3:goto=off, FEEDBACK
gcc:      -Ofast=ip27 -IPA:use_intrinsic:callee_limit=1500:plimit=750:space=120:clone=on -OPT:fast_bit_intrinsics=on \
.         -LNO:fission=1:pwr2=off:prefetch=0 -OPT:ieee_arith=3, FEEDBACK
compress: -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
li:       -Ofast=ip27 -IPA:use_intrinsic:min_hot=12:callee_limit=750:plimit=12000 \
.         -IPA:space=200:clone=on:aggr_cprop=on -OPT:goto=off, FEEDBACK
ijpeg:    -Ofast=ip27 -LNO:fission=0:interchange=off:pf2=0:ou_max=2 -OPT:unroll_analysis=off:unroll_size=480:ieee_arith=3 \
.         -IPA:use_intrinsic:callee_limit=950:plimit=730:space=130:clone=on -OPT:goto=off, FEEDBACK
perl:     -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
vortex:   -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 06-Jan-1998