SPECint95

Siemens Nixdorf Informationssysteme

RM600 Model E60

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
099.go	4600	337	13.6	321	14.3
124.m88ksim	1900	143	13.3	123	15.4
126.gcc	1700	124	13.7	119	14.2
129.compress	1800	116	15.5	115	15.7
130.li	1900	145	13.1	133	14.3
132.ijpeg	2400	184	13.1	180	13.3
134.perl	1900	132	14.4	110	17.3
147.vortex	2700	209	12.9	206	13.1
SPECint_base95			13.7
		SPECint95			14.7

Tester Information:

SPEC License #:	22
Tested By:	SNI, Paderborn / Germany
Test Date:	Nov-97
Hardware Avail:	Apr-98
Software Avail:	Jan-98

Hardware Information:

Model Name:	RM600-E60
CPU:	250 MHz R10000
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	32KBI+32KBD on chip
Secondary Cache:	8MB(I+D) off chip per CPU
Other Cache:	None
Memory:	2048MB
Disk Subsystem:	8 x 9GB (striped)
Other Hardware:	None

Software Information:

Operating System:	Reliant UNIX 5.44 A 00
Compiler:	pyrC 6.0A00
File System:	VxFS (/var/tmp as RAM disk)
System State:	Multi User, no extra processes

Notes:

Baseline: 
PASS1 = -qfeedback; PASS2 = [empty]; OPTIMIZE = -WM,-Omips4 -WM,-G44 -dn 
Peak:
099.go: -WM,-G1799 -Wo,-loopunroll,8 -Wo,-unrolllimit,2000 -Wg,-inline_limit,200
124.m88ksim: -WM,-G4000 -KOlimit:3500 -Wg,-inline_limit,1000  -Wo,-splitedges,0 -WM,-pre_opt
-Wo,-loopunroll,32,-unrolllimit,350 -Wb,-br_likely_cntl,60,200 -WG,-space_time:0.5
126.gcc: -WM,-G44 -WG,-boc,0.38,-only_clone_recursion,-recursion_depth,1,-clone_expansion,1.1 -Wb,-prefetch,512,0 -Wo,-recursive_calls 
129.compress: -WM,-G44 -Wb,-no_self_copy
130.li: -WM,-G4000 -Wo,-unrolllimit,1000 -WG,-boc,0.35,-inline_limit,1500,-recursion_depth,3,-recursion_limit,400
-WG,-clone_expansion,1.25,-only_clone_recursion -Wg,-dont_prune_zero_edges 
132.ijpeg: -WM,-G44 -Wo,-no_const_in_reg -Wo,-unrolllimit:800 -WG,-space_time:3.4 -Wb,-prefetch,100,0
134.perl: -WM,-G32 -KOlimit:5000 -Wo,-unrolllimit,500 -Wo,-recursive_calls -WG,-boc,0.25 -Wg,-recursion_limit,4700
-Wn,-recursion_limit,1000000,-recursion_depth,1,-only_clone_recursion -Wc,-xjp_mh_opt,1,30 -WM,-no_positioning
147.vortex: -WM,-G46 -Wo,-unrolllimit,1000 -Wg,-boc,0.95,-inline_limit,300

1-pass feedback for 099, 124, 129, 132, 147:
PASS1 = -qfeedback -WM,-Omips4 -dn 
PASS2 = -WM,-Omips4 -dn, plus: see above

2-pass feedback for 126, 130, 134:
PASS1 = -qfeedback -WM,-Omips4 -dn
PASS2 = -qfeeedback2 -WM,-Omips4 -dn, plus: see above
fdo_run1 = %command%
fdo_run2 = %command%
fdo_post2 = ksh -c "cd %benchtop%/src; `grep '/usr/opt/pyrC/bin/cc' %benchtop%/src/make2.out | tail -1 | sed -e 's/-qfeedback2/-WM,-use_fb2/'`"
i.e. use all flags of PASS2 except that "-qfeedback2" is replaced by "-WM,-use_fb2"

For Portability: 134.perl: -DI_TIME -DI_SYS_TIME

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 25-Nov-1997