SPECint_rate95

Intel Corporation

XXpress Deskside (100MHz)

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Base # Copies	Base Run Time	Base SPEC Ratio	Peak # Copies	Peak Run Time	Peak SPEC Ratio
099.go	1	1181	35.0	1	1181	35.0
124.m88ksim	1	578	29.6	1	578	29.6
126.gcc	1	488	31.4	1	488	31.4
129.compress	1	613	26.4	1	613	26.4
130.li	1	516	33.2	1	516	33.2
132.ijpeg	1	1065	20.3	1	1065	20.3
134.perl	1	476	36.0	1	476	36.0
147.vortex	1	771	31.5	1	771	31.5
SPECint_rate_base95			30.0
			SPECint_rate95			30.0

Tester Information:

SPEC License #:	14
Tested By:	Intel
Test Date:	May-96
Hardware Avail:	Jun-95
Software Avail:	Mar-96

Hardware Information:

Model Name:	XXpress
CPU:	100MHz Pentium processor
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	8KBI+8KBD
Secondary Cache:	1MB(I+D)
Other Cache:	None
Memory:	64MB(70ns fast page)
Disk Subsystem:	2x973MB Seagate ST 31250W
Other Hardware:	AIC 7870 PCI (onboard)

Software Information:

Operating System:	UnixWare 2.0, UnixWare SDK
Compiler:	Intel C Reference Compiler 2.3
File System:	UFS (/tmp as 8MB /tmpfs)
System State:	Single User (root + killall)

Notes:

Base and peak flags are the same and use Feedback Directed Optimization
Pass1: -tp p5 -ipo -prof_gen -ircdb_dir /tmp/IRCDB -dn
Pass2: -tp p5 -ipo -prof_use -ircdb_dir /tmp/IRCDB -dn
-ircdb_dir is a location flag and not an optimization flag
Portability: 124: -DSYSV -DLEHOST 130, 134, 147: -lm  132: -DSYSV  126: -lm -lc -L/usr/ucblib -lucb -lmalloc
Two processor module; 2nd processor disabled with UnixWare "psradm" command

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 25-Jun-1996