This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 25.8 |
|---|---|
| SPECfp_rate_base95 | 25.8 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 1 | 855 | 38.9 | 1 | 855 | 38.9 |
| 102.swim | 1 | 953 | 81.2 | 1 | 953 | 81.2 |
| 103.su2cor | 1 | 869 | 14.5 | 1 | 869 | 14.5 |
| 104.hydro2d | 1 | 1321 | 16.3 | 1 | 1321 | 16.3 |
| 107.mgrid | 1 | 965 | 23.3 | 1 | 965 | 23.3 |
| 110.applu | 1 | 1111 | 17.8 | 1 | 1111 | 17.8 |
| 125.turb3d | 1 | 2142 | 17.2 | 1 | 2142 | 17.2 |
| 141.apsi | 1 | 950 | 19.9 | 1 | 950 | 19.9 |
| 145.fpppp | 1 | 2406 | 35.9 | 1 | 2406 | 35.9 |
| 146.wave5 | 1 | 785 | 34.4 | 1 | 785 | 34.4 |
| SPECfp_rate_base95 | 25.8 | |||||
| SPECfp_rate95 | 25.8 | |||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Cupertino, CA |
| Test Date: | Nov-95 |
| Hardware Avail: | Jan-96 |
| Software Avail: | Aug-95 |
Hardware Information:
| Model Name: | HP 9000 Model D200 |
|---|---|
| CPU: | 75 MHz PA-RISC 7100LC |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 256KB I+D off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 512MB |
| Disk Subsystem: | 7 Fast/Wide SCSI-2 1.0 GB |
| Other Hardware: | Ethernet |
Software Information:
| Operating System: | HP-UX B.10.01 |
|---|---|
| Compiler: | FORTRAN B3906AA B.10.00.01.00 |
| File System: | HP-UX |
| System State: | Multi-user |
Notes:
BASE FLAGS: All: +Oall +Onofastaccess +DA811 -Wl,-a,archive PEAK FLAGS: Same as BASE FLAGS.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@specbench.org Tue Feb 27 2:05:10 PST 1996First published at SPEC.org on 20-Feb-1996