CPU2017 Flag Description
Supermicro Mainstream A+ Server AS -2024S-TR (H12DSi-N6 , AMD EPYC 7303)
Compilers: AMD Optimizing C/C++ Compiler Suite
Base Compiler Invocation
-
- clang
![[user]](https://www.spec.org/auto/cpu2017/images/user.png)
- CC, LD
-
clang is a C compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
Depending on which high-level mode setting is passed, Clang will stop before doing a full link.
-
- clang++
- CXX, LD
-
clang++ C++ compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
Depending on which high-level mode setting is passed, Clang will stop before doing a full link.
-
- flang
- FC, LD
-
flang is a Fortran compiler which encompasses parsing, optimization, code generation, assembly, and linking. Depending on
which high-level mode setting is passed, Flang will stop before doing a full link.
Peak Compiler Invocation
-
- clang
- CC, LD
-
clang is a C compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
Depending on which high-level mode setting is passed, Clang will stop before doing a full link.
-
- clang++
- CXX, LD
-
clang++ C++ compiler which encompasses preprocessing, parsing, optimization, code generation, assembly, and linking.
Depending on which high-level mode setting is passed, Clang will stop before doing a full link.
-
- flang
- FC, LD
-
flang is a Fortran compiler which encompasses parsing, optimization, code generation, assembly, and linking. Depending on
which high-level mode setting is passed, Flang will stop before doing a full link.
Base Portability Flags
-
![[suite]](https://www.spec.org/auto/cpu2017/images/suite.png)
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
Peak Portability Flags
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
-
- EXTRA_PORTABILITY
-
This option is used to indicate that the host system's integers are 32-bits
wide, and longs and pointers are 64-bits wide. Not all benchmarks
recognize this macro, but the preferred practice for data model selection
applies the flags to all benchmarks; this flag description is a placeholder
for those benchmarks that do not recognize this macro.
Base Optimization Flags
-
- -m64
- CC, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
-
-
-
-
-
-
- -O3
- COPTIMIZE
-
Like -O2, except that it enables optimizations that take longer to perform or that may generate larger code (in
an attempt to make the program run faster).
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective.
- Includes:
-
- -march=znver3
- COPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- COPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
- -fstruct-layout=5
- COPTIMIZE
-
Analyzes the whole program to determine if the structures in the code can be peeled and if pointer or integer fields in
the structure can be compressed. If feasible, this optimization transforms the code to enable these improvements. This
transformation is likely to improve cache utilization and memory bandwidth. This, in turn, is expected to improve the
scalability of programs executed on multiple cores.
This is effective only under -flto as whole program analysis is required to perform this optimization. You can choose
different levels of aggressiveness with which this optimization can be applied to your application with 1 being the least
aggressive and 7 being the most aggressive level.
Possible values:
- fstruct-layout=1: enables structure peeling.
- fstruct-layout=2: enables structure peeling and selectively compresses self-referential pointers in these
structures to 32-bit pointers wherever safe.
- fstruct-layout=3: enables structure peeling and selectively compresses self-referential pointers in these
structures to 16-bit pointers wherever safe.
- fstruct-layout=4: enables structure peeling, pointer compression as in level 2 and further enables
compression of structure fields which are of integer type. This is performed under a strict safety check.
- fstruct-layout=5: enables structure peeling, pointer compression as in level 3 and further enables compression
of structure fields which are of integer type. This is performed under a strict safety check.
- fstruct-layout=6: enables structure peeling, pointer compression as in level 2 and further enables compression
of structure fields which are of type 64-bit 'signed int' or 'unsigned Int'. The user needs to ensure that the values
assigned to 64-bit 'signed int' fields are in range -(2^31 - 1) to +(2^31 - 1) and 64-bit 'unsigned int' fields are in
range 0 to +(2^31 - 1), otherwise, incorrect results may be obtained. This compression is performed without considering
any safety analysis and so the user needs to ensure the safety based on the program compiled.
- fstruct-layout=7: enables structure peeling, pointer compression as in level 3 and further enables compression
of structure fields which are of type 64-bit 'signed int' or 'unsigned Int'. The user needs to ensure that the values
assigned to 64-bit 'signed int' fields are in range -(2^31 - 1) to +(2^31 - 1) and 64-bit 'unsigned int' field are in
range 0 to +(2^31 - 1) , otherwise, incorrect results may be obtained. This compression is performed without considering
any safety analysis and so the user needs to ensure the safety based on the program compiled.
Note:
fstruct-layout=4 and fstruct-layout=5 are derived from fstruct-layout=2 and fstruct-layout=3 respectively with the added
feature of safe compression of integer fields in structures. Going from fstruct-layout=4 to fstruct-layout=5 may result
in higher performance if the pointer values are such that the pointers can be compressed to 16-bits.
fstruct-layout=6 and fstruct-layout=7 are derived from fstruct-layout=2 and fstruct-layout=3 respectively with the added
feature of compression of integer fields in structures. These are similar to fstruct-layout=4 and fstruct-layout=5, but
here, the integer fields of the structures are always compressed from 64-bits to 32-bits without any safety guarantee.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -m64
- CXX, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
-
-
-
-
- -O3
- CXXOPTIMIZE
-
Like -O2, except that it enables optimizations that take longer to perform or that may generate larger code (in
an attempt to make the program run faster).
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective.
- Includes:
-
- -march=znver3
- CXXOPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- CXXOPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
-
-
-
-
-
-
- -mllvm -aggressive-loop-unswitch
- CXXOPTIMIZE
-
This option enables aggressive loop unswitching heuristic (including -enable-partial-unswitch)
based on the usage of the branch conditional values. Loop unswitching leads to code-bloat. Code-bloat can be
minimized if the hoisted condition is executed more often. This heuristic prioritizes the conditions based
on the number of times they are used within the loop. The heuristic can be controlled with the following options:
- -unswitch-identical-branches-min-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at least
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 3.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-min-count=<n>
where n is a positive integer and lower value of <n> facilitates more unswitching.
- -unswitch-identical-branches-max-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at most
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 6.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-max-count=<n>
where n is a positive integer and higher value of <n> facilitates more unswitching.
Note: These options may facilitate more unswitching in some of the workloads. Since loop-unswitching inherently leads
to code bloat, facilitating more unswitching may significantly increase the code size and hence may also lead to longer
compilation times.
- Includes:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -m64
- FC, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
-
-
-
-
-
-
-
- -O3
- FOPTIMIZE
-
Like -O2, except that it enables optimizations that take longer to perform or that may generate larger code (in
an attempt to make the program run faster).
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective.
- Includes:
-
- -march=znver3
- FOPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- FOPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
-
-
-
-
-
-
-
-
Peak Optimization Flags
-
- -m64
- CC, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
-
-
-
-
-
-
- -march=znver3
- COPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- COPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
- -fstruct-layout=5
- COPTIMIZE
-
Analyzes the whole program to determine if the structures in the code can be peeled and if pointer or integer fields in
the structure can be compressed. If feasible, this optimization transforms the code to enable these improvements. This
transformation is likely to improve cache utilization and memory bandwidth. This, in turn, is expected to improve the
scalability of programs executed on multiple cores.
This is effective only under -flto as whole program analysis is required to perform this optimization. You can choose
different levels of aggressiveness with which this optimization can be applied to your application with 1 being the least
aggressive and 7 being the most aggressive level.
Possible values:
- fstruct-layout=1: enables structure peeling.
- fstruct-layout=2: enables structure peeling and selectively compresses self-referential pointers in these
structures to 32-bit pointers wherever safe.
- fstruct-layout=3: enables structure peeling and selectively compresses self-referential pointers in these
structures to 16-bit pointers wherever safe.
- fstruct-layout=4: enables structure peeling, pointer compression as in level 2 and further enables
compression of structure fields which are of integer type. This is performed under a strict safety check.
- fstruct-layout=5: enables structure peeling, pointer compression as in level 3 and further enables compression
of structure fields which are of integer type. This is performed under a strict safety check.
- fstruct-layout=6: enables structure peeling, pointer compression as in level 2 and further enables compression
of structure fields which are of type 64-bit 'signed int' or 'unsigned Int'. The user needs to ensure that the values
assigned to 64-bit 'signed int' fields are in range -(2^31 - 1) to +(2^31 - 1) and 64-bit 'unsigned int' fields are in
range 0 to +(2^31 - 1), otherwise, incorrect results may be obtained. This compression is performed without considering
any safety analysis and so the user needs to ensure the safety based on the program compiled.
- fstruct-layout=7: enables structure peeling, pointer compression as in level 3 and further enables compression
of structure fields which are of type 64-bit 'signed int' or 'unsigned Int'. The user needs to ensure that the values
assigned to 64-bit 'signed int' fields are in range -(2^31 - 1) to +(2^31 - 1) and 64-bit 'unsigned int' field are in
range 0 to +(2^31 - 1) , otherwise, incorrect results may be obtained. This compression is performed without considering
any safety analysis and so the user needs to ensure the safety based on the program compiled.
Note:
fstruct-layout=4 and fstruct-layout=5 are derived from fstruct-layout=2 and fstruct-layout=3 respectively with the added
feature of safe compression of integer fields in structures. Going from fstruct-layout=4 to fstruct-layout=5 may result
in higher performance if the pointer values are such that the pointers can be compressed to 16-bits.
fstruct-layout=6 and fstruct-layout=7 are derived from fstruct-layout=2 and fstruct-layout=3 respectively with the added
feature of compression of integer fields in structures. These are similar to fstruct-layout=4 and fstruct-layout=5, but
here, the integer fields of the structures are always compressed from 64-bits to 32-bits without any safety guarantee.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- -m64
- CC, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
-
-
- EXTRA_LDFLAGS
-
Block Reordering
Possible values:
- none: No block reordering
- simple: Simple block reordering
- aggressive: Aggressive block reordering
This optimization also includes safety analysis which checks that it is
safe to reorder basic blocks. However, when this optimization takes effect,
the safety analysis ignores exceptions specifically within the call chain
involved in the context of the blocks being reordered. This would be acceptable
for most input programs, but if your program strictly needs to support throwing
of exceptions at all points in the program, then it is advisable to avoid using
this option.
-
-
-
-
-
-
- -march=znver3
- COPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- COPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
- -fstruct-layout=5
- COPTIMIZE
-
Analyzes the whole program to determine if the structures in the code can be peeled and if pointer or integer fields in
the structure can be compressed. If feasible, this optimization transforms the code to enable these improvements. This
transformation is likely to improve cache utilization and memory bandwidth. This, in turn, is expected to improve the
scalability of programs executed on multiple cores.
This is effective only under -flto as whole program analysis is required to perform this optimization. You can choose
different levels of aggressiveness with which this optimization can be applied to your application with 1 being the least
aggressive and 7 being the most aggressive level.
Possible values:
- fstruct-layout=1: enables structure peeling.
- fstruct-layout=2: enables structure peeling and selectively compresses self-referential pointers in these
structures to 32-bit pointers wherever safe.
- fstruct-layout=3: enables structure peeling and selectively compresses self-referential pointers in these
structures to 16-bit pointers wherever safe.
- fstruct-layout=4: enables structure peeling, pointer compression as in level 2 and further enables
compression of structure fields which are of integer type. This is performed under a strict safety check.
- fstruct-layout=5: enables structure peeling, pointer compression as in level 3 and further enables compression
of structure fields which are of integer type. This is performed under a strict safety check.
- fstruct-layout=6: enables structure peeling, pointer compression as in level 2 and further enables compression
of structure fields which are of type 64-bit 'signed int' or 'unsigned Int'. The user needs to ensure that the values
assigned to 64-bit 'signed int' fields are in range -(2^31 - 1) to +(2^31 - 1) and 64-bit 'unsigned int' fields are in
range 0 to +(2^31 - 1), otherwise, incorrect results may be obtained. This compression is performed without considering
any safety analysis and so the user needs to ensure the safety based on the program compiled.
- fstruct-layout=7: enables structure peeling, pointer compression as in level 3 and further enables compression
of structure fields which are of type 64-bit 'signed int' or 'unsigned Int'. The user needs to ensure that the values
assigned to 64-bit 'signed int' fields are in range -(2^31 - 1) to +(2^31 - 1) and 64-bit 'unsigned int' field are in
range 0 to +(2^31 - 1) , otherwise, incorrect results may be obtained. This compression is performed without considering
any safety analysis and so the user needs to ensure the safety based on the program compiled.
Note:
fstruct-layout=4 and fstruct-layout=5 are derived from fstruct-layout=2 and fstruct-layout=3 respectively with the added
feature of safe compression of integer fields in structures. Going from fstruct-layout=4 to fstruct-layout=5 may result
in higher performance if the pointer values are such that the pointers can be compressed to 16-bits.
fstruct-layout=6 and fstruct-layout=7 are derived from fstruct-layout=2 and fstruct-layout=3 respectively with the added
feature of compression of integer fields in structures. These are similar to fstruct-layout=4 and fstruct-layout=5, but
here, the integer fields of the structures are always compressed from 64-bits to 32-bits without any safety guarantee.
-
-
-
-
-
-
-
-
-
-
- -mllvm -do-block-reorder=aggressive
- COPTIMIZE
-
Block Reordering
Possible values:
- none: No block reordering
- simple: Simple block reordering
- aggressive: Aggressive block reordering
This optimization also includes safety analysis which checks that it is
safe to reorder basic blocks. However, when this optimization takes effect,
the safety analysis ignores exceptions specifically within the call chain
involved in the context of the blocks being reordered. This would be acceptable
for most input programs, but if your program strictly needs to support throwing
of exceptions at all points in the program, then it is advisable to avoid using
this option.
-
-
-
-
-
-
-
- -m64
- CXX, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
-
-
-
-
- -march=znver3
- CXXOPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- CXXOPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
-
-
-
-
-
- -mllvm -aggressive-loop-unswitch
- CXXOPTIMIZE
-
This option enables aggressive loop unswitching heuristic (including -enable-partial-unswitch)
based on the usage of the branch conditional values. Loop unswitching leads to code-bloat. Code-bloat can be
minimized if the hoisted condition is executed more often. This heuristic prioritizes the conditions based
on the number of times they are used within the loop. The heuristic can be controlled with the following options:
- -unswitch-identical-branches-min-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at least
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 3.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-min-count=<n>
where n is a positive integer and lower value of <n> facilitates more unswitching.
- -unswitch-identical-branches-max-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at most
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 6.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-max-count=<n>
where n is a positive integer and higher value of <n> facilitates more unswitching.
Note: These options may facilitate more unswitching in some of the workloads. Since loop-unswitching inherently leads
to code bloat, facilitating more unswitching may significantly increase the code size and hence may also lead to longer
compilation times.
- Includes:
-
-
-
-
-
-
-
-
-
-
-
- -m64
- CXX, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
-
-
-
- EXTRA_LDFLAGS
-
Block Reordering
Possible values:
- none: No block reordering
- simple: Simple block reordering
- aggressive: Aggressive block reordering
This optimization also includes safety analysis which checks that it is
safe to reorder basic blocks. However, when this optimization takes effect,
the safety analysis ignores exceptions specifically within the call chain
involved in the context of the blocks being reordered. This would be acceptable
for most input programs, but if your program strictly needs to support throwing
of exceptions at all points in the program, then it is advisable to avoid using
this option.
-
-
- -march=znver3
- CXXOPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- CXXOPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
-
-
-
-
-
- -mllvm -aggressive-loop-unswitch
- CXXOPTIMIZE
-
This option enables aggressive loop unswitching heuristic (including -enable-partial-unswitch)
based on the usage of the branch conditional values. Loop unswitching leads to code-bloat. Code-bloat can be
minimized if the hoisted condition is executed more often. This heuristic prioritizes the conditions based
on the number of times they are used within the loop. The heuristic can be controlled with the following options:
- -unswitch-identical-branches-min-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at least
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 3.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-min-count=<n>
where n is a positive integer and lower value of <n> facilitates more unswitching.
- -unswitch-identical-branches-max-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at most
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 6.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-max-count=<n>
where n is a positive integer and higher value of <n> facilitates more unswitching.
Note: These options may facilitate more unswitching in some of the workloads. Since loop-unswitching inherently leads
to code bloat, facilitating more unswitching may significantly increase the code size and hence may also lead to longer
compilation times.
- Includes:
-
-
-
- EXTRA_CXXFLAGS
-
Block Reordering
Possible values:
- none: No block reordering
- simple: Simple block reordering
- aggressive: Aggressive block reordering
This optimization also includes safety analysis which checks that it is
safe to reorder basic blocks. However, when this optimization takes effect,
the safety analysis ignores exceptions specifically within the call chain
involved in the context of the blocks being reordered. This would be acceptable
for most input programs, but if your program strictly needs to support throwing
of exceptions at all points in the program, then it is advisable to avoid using
this option.
-
-
-
-
-
-
-
-
-
- -m64
- CXX, LD
-
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and
pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64,
x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target
platform specified is 64-bit, otherwise the default is 32-bit.
-
- EXTRA_LDFLAGS
-
Block Reordering
Possible values:
- none: No block reordering
- simple: Simple block reordering
- aggressive: Aggressive block reordering
This optimization also includes safety analysis which checks that it is
safe to reorder basic blocks. However, when this optimization takes effect,
the safety analysis ignores exceptions specifically within the call chain
involved in the context of the blocks being reordered. This would be acceptable
for most input programs, but if your program strictly needs to support throwing
of exceptions at all points in the program, then it is advisable to avoid using
this option.
-
-
-
-
-
- -O3
- CXXOPTIMIZE
-
Like -O2, except that it enables optimizations that take longer to perform or that may generate larger code (in
an attempt to make the program run faster).
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective.
- Includes:
-
- -march=znver3
- CXXOPTIMIZE
-
Specify that Clang should generate code for a specific processor family member and later. For example, if you specify
-march=znver1, the compiler is allowed to generate instructions that are valid on AMD Zen processors, but
which may not exist on earlier products.
-
-
- -ffast-math
- CXXOPTIMIZE
-
Enables a range of optimizations that provide faster, though sometimes less precise, mathematical operations that may
not conform to the IEEE-754 specifications. When this option is specified, the __STDC_IEC_559__ macro is
ignored even if set by the system headers.
-
-
-
-
-
-
-
-
-
- -mllvm -aggressive-loop-unswitch
- CXXOPTIMIZE
-
This option enables aggressive loop unswitching heuristic (including -enable-partial-unswitch)
based on the usage of the branch conditional values. Loop unswitching leads to code-bloat. Code-bloat can be
minimized if the hoisted condition is executed more often. This heuristic prioritizes the conditions based
on the number of times they are used within the loop. The heuristic can be controlled with the following options:
- -unswitch-identical-branches-min-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at least
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 3.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-min-count=<n>
where n is a positive integer and lower value of <n> facilitates more unswitching.
- -unswitch-identical-branches-max-count=<n>
Enables unswitching of a loop with respect to a branch conditional value (B), where B appears in at most
<n> compares in the loop. This option is enabled with -aggressive-loop-unswitch. Default value is 6.
Usage: -mllvm -aggressive-loop-unswitch -mllvm -unswitch-identical-branches-max-count=<n>
where n is a positive integer and higher value of <n> facilitates more unswitching.
Note: These options may facilitate more unswitching in some of the workloads. Since loop-unswitching inherently leads
to code bloat, facilitating more unswitching may significantly increase the code size and hence may also lead to longer
compilation times.
- Includes:
-
-
-
-
-
- EXTRA_CXXFLAGS
-
Block Reordering
Possible values:
- none: No block reordering
- simple: Simple block reordering
- aggressive: Aggressive block reordering
This optimization also includes safety analysis which checks that it is
safe to reorder basic blocks. However, when this optimization takes effect,
the safety analysis ignores exceptions specifically within the call chain
involved in the context of the blocks being reordered. This would be acceptable
for most input programs, but if your program strictly needs to support throwing
of exceptions at all points in the program, then it is advisable to avoid using
this option.
-
-
-
-
-
-
-
-
Implicitly Included Flags
This section contains descriptions of flags that were included implicitly
by other flags, but which do not have a permanent home at SPEC.
-
- -O2
-
Moderate level of optimization which enables most optimizations. This is the default when no "-O" option is
specified, or if no value is specified (i.e. "-O").
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective.
- Includes:
-
- -O1
-
Somewhere between -O0 and -O2.
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective.
-
-
- -O3
-
Like -O2, except that it enables optimizations that take longer to perform or that may generate larger code (in
an attempt to make the program run faster).
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective.
- Includes:
Using numactl to bind processes and memory to cores
For multi-copy runs or single copy runs on systems with multiple sockets, it is advantageous to bind a process to a
particular core. Otherwise, the OS may arbitrarily move your process from one core to another. This can affect
performance. To help, SPEC allows the use of a "submit" command where users can specify a utility to use to bind
processes. We have found the utility 'numactl' to be the best choice.
numactl runs processes with a specific NUMA scheduling or memory placement policy. The policy is set for a
command and inherited by all of its children. The numactl flag "--physcpubind" specifies
which core(s) to bind the process. "-l" instructs numactl to keep a process's memory on the
local node while "-m" specifies which node(s) to place a process's memory. For full details on using
numactl, please refer to your Linux documentation, 'man numactl'
Note that some older versions of numactl incorrectly interpret application arguments as its own. For
example, with the command "numactl --physcpubind=0 -l a.out -m a", numactl will interpret
a.out's "-m" option as its own "-m" option. To work around this problem, we put
the command to be run in a shell script and then run the shell script using numactl. For example:
"echo 'a.out -m a' > run.sh ; numactl --physcpubind=0 bash run.sh"
Transparent Huge Pages (THP)
THP is an abstraction layer that automates most aspects of creating, managing,
and using huge pages. It is designed to hide much of the complexity in using
huge pages from system administrators and developers. Huge pages
increase the memory page size from 4 kilobytes to 2 megabytes. This provides
significant performance advantages on systems with highly contended resources
and large memory workloads. If memory utilization is too high or memory is badly
fragmented which prevents huge pages being allocated, the kernel will assign
smaller 4k pages instead. Most recent Linux OS releases have THP enabled by default.
THP usage is controlled by the sysfs setting /sys/kernel/mm/transparent_hugepage/enabled.
Possible values:
- never: entirely disable THP usage.
- madvise: enable THP usage only inside regions marked MADV_HUGEPAGE using madvise(3).
- always: enable THP usage system-wide. This is the default.
The SPEC CPU benchmark codes themselves never explicitly request huge pages, as the mechanism to do that is OS-specific
and can change over time. Libraries such as jemalloc which are used by the benchmarks may explicitly request huge pages,
and use of such libraries can make the "madvise" setting relevant and useful.
When no huge pages are immediately available and one is requested, how the system handles the request for THP creation is
controlled by the sysfs setting /sys/kernel/mm/transparent_hugepage/defrag.
Possible values:
- never: if no THP are available to satisfy a request, do not attempt to make any.
- defer: an allocation requesting THP when none are available gets normal pages while requesting THP creation in the
background.
- defer+madvise: acts like "always", but only for allocations in regions marked MADV_HUGEPAGE using madvise(3); for all
other regions it's like "defer".
- madvise: acts like "always", but only for allocations in regions marked MADV_HUGEPAGE using madvise(3). This is the
default.
- always: an allocation requesting THP when none are available will stall until some are made.
An application that "always" requests THP often can benefit from waiting for an allocation until those huge pages can be assembled.
For more information see the Linux transparent hugepage documentation.
ulimit -s <n>
Sets the stack size to n kbytes, or unlimited to allow the stack size to grow without limit.
ulimit -l <n>
Sets the maximum size of memory that may be locked into physical memory.
powersave -f (on SuSE)
Makes the powersave daemon set the CPUs to the highest supported frequency.
/etc/init.d/cpuspeed stop (on Red Hat)
Disables the cpu frequency scaling program in order to set the CPUs to the highest supported frequency.
LD_LIBRARY_PATH
An environment variable that indicates the location in the filesystem of bundled libraries to use when running the
benchmark binaries.
kernel/numa_balancing
This OS setting controls automatic NUMA balancing on memory mapping and process placement.
NUMA balancing incurs overhead for no benefit on workloads that are already bound to NUMA nodes.
Possible settings:
- 0: disables this feature
- 1: enables the feature (this is the default)
For more information see the numa_balancing entry in the
Linux sysctl documentation.
kernel/randomize_va_space (ASLR)
This setting can be used to select the type of process address space
randomization. Defaults differ based on whether the architecture supports
ASLR, whether the kernel was built with the CONFIG_COMPAT_BRK
option or not, or the kernel boot options used.
Possible settings:
- 0 - Turn the process address space randomization off. This is the default for architectures that do not support
this feature anyway, and kernels that are booted with the "
norandmaps" parameter.
- 1 - Randomize addresses of mmap base, stack, and VDSO pages.
This is the default if the
CONFIG_COMPAT_BRK option is enabled at kernel build time.
- 2 - Additionally enable heap randomization. This is the default if
CONFIG_COMPAT_BRK is
disabled.
Disabling ASLR can make process execution more deterministic and runtimes more consistent.
For more information see the randomize_va_space entry in the
Linux sysctl documentation.
MALLOC_CONF
The jemalloc library has tunable parameters, many of which may be changed at run-time via several mechanisms, one of which
is the MALLOC_CONF environment variable. Other methods, as well as the order in which they're referenced,
are detailed in the jemalloc documentation's TUNING section.
The options that can be tuned at run-time are everything in the jemalloc documentation's
MALLCTL NAMESPACE section that begins with
"opt.".
The options that may be encountered in SPEC CPU 2017 results are detailed here:
retain:true - Causes unused virtual memory to
be retained for later reuse rather than discarding it. This is the default for 64-bit Linux.thp:never - Attempts to never utilize huge pages
by using MADV_NOHUGEPAGE on all mappings. This option has no effect except when THP is set to
"madvise".
PGHPF_ZMEM
An environment variable used to initialize the allocated memory. Setting PGHPF_ZMEM to "Yes" has the effect of
initializing all allocated memory to zero.
GOMP_CPU_AFFINITY
This environment variable is used to set the thread affinity for threads spawned by OpenMP.
OMP_DYNAMIC
This environment variable is defined as part of the OpenMP standard.
Setting it to "false" prevents the OpenMP runtime from dynamically adjusting the number of threads to use for parallel
execution.
For more information, see chapter 4 ("Environment Variables") in the
OpenMP 4.5 Specification.
OMP_SCHEDULE
This environment variable is defined as part of the OpenMP standard.
Setting it to "static" causes loop iterations to be assigned to threads in round-robin fashion in the order of the thread
number.
For more information, see chapter 4 ("Environment Variables") in the
OpenMP 4.5 Specification.
OMP_STACKSIZE
This environment variable is defined as part of the OpenMP standard and controls the size of the stack for threads created
by OpenMP.
For more information, see chapter 4 ("Environment Variables") in the
OpenMP 4.5 Specification.
OMP_THREAD_LIMIT
This environment variable is defined as part of the OpenMP standard and limits the maximum number of OpenMP threads that
can be created.
For more information, see chapter 4 ("Environment Variables") in the
OpenMP 4.5 Specification.
LIBOMP_NUM_HIDDEN_HELPER_THREADS
target nowait is supported via hidden helper task, which is a task not bound to any parallel region.
A hidden helper team with a number of threads is created when the first hidden helper task is encountered.
The number of threads can be configured via the environment variable LIBOMP_NUM_HIDDEN_HELPER_THREADS. The
default is 8. If LIBOMP_NUM_HIDDEN_HELPER_THREADS is 0, the hidden helper task is disabled and support
falls back to a regular OpenMP task. The hidden helper task can also be disabled by setting the environment variable
LIBOMP_USE_HIDDEN_HELPER_TASK=OFF.
- kernel.randomize_va_space (ASLR)
-
This setting can be used to select the type of process address space randomization.
Defaults differ based on whether the architecture supports ASLR, whether the kernel
was built with the CONFIG_COMPAT_BRK option or not, or the kernel boot options used.
Possible settings:
- 0: Turn process address space randomization off.
- 1: Randomize addresses of mmap base, stack, and VDSO pages.
- 2: Additionally randomize the heap. (This is probably the default.)
Disabling ASLR can make process execution more deterministic and runtimes more consistent.
For more information see the randomize_va_space entry in the
Linux sysctl documentation.
- Transparent Hugepages (THP)
-
THP is an abstraction layer that automates most aspects of creating, managing,
and using huge pages. It is designed to hide much of the complexity in using
huge pages from system administrators and developers. Huge pages
increase the memory page size from 4 kilobytes to 2 megabytes. This provides
significant performance advantages on systems with highly contended resources
and large memory workloads. If memory utilization is too high or memory is badly
fragmented which prevents hugepages being allocated, the kernel will assign
smaller 4k pages instead. Most recent Linux OS releases have THP enabled by default.
THP usage is controlled by the sysfs setting /sys/kernel/mm/transparent_hugepage/enabled.
Possible values:
- never: entirely disable THP usage.
- madvise: enable THP usage only inside regions marked MADV_HUGEPAGE using madvise(3).
- always: enable THP usage system-wide. This is the default.
THP creation is controlled by the sysfs setting /sys/kernel/mm/transparent_hugepage/defrag.
Possible values:
- never: if no THP are available to satisfy a request, do not attempt to make any.
- defer: an allocation requesting THP when none are available get normal pages while requesting THP creation in the background.
- defer+madvise: acts like "always", but only for allocations in regions marked MADV_HUGEPAGE using madvise(3); for all other regions it's like "defer".
- madvise: acts like "always", but only for allocations in regions marked MADV_HUGEPAGE using madvise(3). This is the default.
- always: an allocation requesting THP when none are available will stall until some are made.
An application that "always" requests THP often can benefit from waiting for an allocation until those huge pages can be assembled.
For more information see the Linux transparent hugepage documentation.
- dirty_ratio
-
This is a percentage value of total available memory that can be filled with dirty data before writing the modifications to disk. Set through "sysctl -w vm.dirty_ratio=8".
- swappiness
-
This control is used to define how aggressive the kernel will swap memory pages. Increaasing the value causes swapping more frequently. The default value is 60.
A value of 1 tells the kernel to only swap processes to disk if absolutely necessary. This can be set through a command like "sysctl -w vm.swappiness=1"
- zone_reclaim_mode
-
Zone_reclaim_mode allows someone to set more or less aggressive approaches to reclaim memory when a zone runs out of memory.
It controls whether memory reclaim is performed on a local NUMA node or other nodes.
To tell the kernel to free local node memory rather than grabbing free memory from remote nodes, it can be set through a command like "sysctl -w vm.zone_reclaim_mode=1".
- drop_caches
-
Writing this will cause kernel to drop clean caches, as well as reclaimable slab objects like dentries and inodes. Once dropped, their memory becomes free.
Set through "sysctl -w vm.drop_caches=3" to free slab objects and pagecache.
- CPUFreq scaling governor:
-
Governors are power schemes for the CPU. It is in-kernel pre-configured power schemes for the CPU and allows you to change the clock speed of the CPUs on the fly. On Linux systems can set the govenor for all CPUs through the cpupower utility with the following command:
- "cpupower -c all frequency-set -g governor"
Below are govenors in the Linux kernel.
- performance: Run the CPU at the maximum frequency.
- powersave: Run the CPU at the minimum frequency.
- userspace: Run the CPU at user specified frequencies.
- ondemand: Scales the frequency dynamically according to current load. Jumps to the highest frequency and then possibly back off as the idle time increases.
- conservative: Scales the frequency dynamically according to current load. Scales the frequency more gradually than ondemand.
- schedutil: Scheduler-driven CPU frequency selection.
- tuned-adm:
-
A commandline interface for switching between different tuning profiles available in supported Linux distributions. The distribution provided profiles are located in /usr/lib/tuned and the user defined profiles in /etc/tuned. To set a profile, one can issue the command "tuned-adm profile (profile_name)". Below are details about some relevant profiles.
- throughput-performance: For typical throughput performance tuning. Disables power saving mechanisms and enables sysctl settings that improve the throughput performance of disk and network I/O. CPU governor is set to performance and CPU energy performance bias is set to performance. Disk readahead values are increased.
- latency-performance: For low latency performance tuning. Disables power saving mechanisms. CPU governor is set to performance and locked to the low C states. CPU energy performance bias to performance.
- balanced: Default profile provides balanced power saving and performance. It enables CPU and disk plugins of tuned and makes the conservative governor is active and also sets the CPU energy performance bias to normal. It also enables power saving on audio and graphics card.
- powersave: Maximal power saving for whole system. It sets the CPU governor to ondemand governor and energy performance bias to powersave. It also enable power saving on USB, SATA, audio and graphics card.
- Determinism Control:
-
This BIOS option allows for choose AGESA determinism control.
AGESA is an acronym for "AMD Generic Encapsulated Software Architecture."
AGESA is a bootstrap protocol by which system devices on AMD64-architecture mainboards are initialized, it responsible for the initialization of the processor cores, memory, and the HyperTransport controller.
Available settings are:
- Manual: User can customize determinism slider.
- Auto (Default setting): Use the processor fused determinism control.
- Determinism Slider:
-
This BIOS option allows for Enable/Disable AGESA determinism to control performance.
AGESA is an acronym for "AMD Generic Encapsulated Software Architecture."
AGESA is a bootstrap protocol by which system devices on AMD64-architecture mainboards are initialized, it responsible for the initialization of the processor cores, memory, and the HyperTransport controller.
Available settings are:
- Performance: AGESA will enable 100% deterministic performance control.
- Power: AGESA will not enable deterministic performance control.
- Auto (Default setting): Use default value for deterministic performance control.
- cTDP Control:
-
This BIOS option is for "Configurable TDP (cTDP)", it allows user can set customized value for TDP. Available settings are:
- Auto (Default setting): Use the fused TDP value.
- Manual: Let user specifies customized TDP value.
- cTDP:
-
TDP is an acronym for “Thermal Design Power.” TDP is the recommended target for power used when designing the cooling capacity for a server.
EPYC processors are able to control this target power consumption within certain limits. This capability is referred to as “configurable TDP” or "cTDP."
cTDP can be used to reduce power consumption for greater efficiency, or in some cases, increase power consumption above the default value to provide additional performance.
cTDP is controlled using a BIOS option.
The default EPYC cTDP value corresponds with the microprocessor’s nominal TDP. For the EPYC 7413, the default value is 180W.
The default cTDP value is set at a good balance between performance and energy efficiency.
The EPYC 7413 cTDP can be reduced as low as 165W, which will minimize the power consumption for the processor under load, but at the expense of peak performance.
Increasing the EPYC 7713 cTDP to 240W will maximize peak performance by allowing the CPU to maintain higher dynamic clock speeds, but will make the microprocessor less energy efficient.
Note that at maximum cTDP, the CPU thermal solution must be capable of dissipating at least 240W or the EPYC 7713 processor might engage in thermal throttling under load.
The available cTDP ranges for each EPYC model are in the table below:
| Model | Nominal TDP | Minimum cTDP | Maximum cTDP** |
|---|
| EPYC 7773X | 280W | 225W | 280W |
|---|
| EPYC 7573X | 280W | 225W | 280W |
|---|
| EPYC 7473X | 240W | 225W | 280W |
|---|
| EPYC 7373X | 240W | 225W | 280W |
|---|
| EPYC 7763 | 280W | 225W | 280W |
|---|
| EPYC 7713 | 225W | 225W | 240W |
|---|
| EPYC 7713P | 225W | 225W | 240W |
|---|
| EPYC 7663 | 240W | 225W | 240W |
|---|
| EPYC 7643 | 225W | 225W | 240W |
|---|
| EPYC 75F3 | 280W | 225W | 280W |
|---|
| EPYC 7543 | 225W | 225W | 240W |
|---|
| EPYC 7543P | 225W | 225W | 240W |
|---|
| EPYC 7513 | 200W | 165W | 200W |
|---|
| EPYC 7453 | 225W | 225W | 240W |
|---|
| EPYC 74F3 | 240W | 225W | 240W |
|---|
| EPYC 7443 | 200W | 165W | 200W |
|---|
| EPYC 7443P | 200W | 165W | 200W |
|---|
| EPYC 7413 | 180W | 165W | 200W |
|---|
| EPYC 73F3 | 224W | 225W | 240W |
|---|
| EPYC 7343 | 195W | 165W | 200W |
|---|
| EPYC 7313 | 155W | 155W | 180W |
|---|
| EPYC 7313P | 155W | 155W | 180W |
|---|
| EPYC 72F3 | 180W | 165W | 200W |
|---|
* cTDP must remain below the thermal solution design parameters or thermal throttling could be frequently encountered.
- IOMMU:
-
The I/O Memory Management Unit (IOMMU) extends the AMD64 system architecture by adding support for address translation and system memory access protection on DMA transfers from periph-eral devices.
IOMMU also helps filter and remap interrupts from peripheral devices.
Available settings are:
- Disabled: Disable IOMMU support.
- Enabled: Enable IOMMU support.
- Auto (Default setting): Use default value for IOMMU. The default value is disable.
- Package Power Limit Control:
-
This is a per processor Package Power Limit (PPT) value applicable for all populated processors in the system.
This can be set to limit the PPT to a certain value.
Available settings are:
- Auto (Default setting): Use the fused processor PPT value.
- Manual: Let user specifies customized processor PPT value.
- Package Power Limit:
-
Set customize processor Package Power Limit (PPT) value to be used on all populated processors in the system.
If set to 240 = Use the 240W PPT ***PPT will be used as the ASIC power limit***
- APBDIS:
-
APBDis is an IO Boost disable on uncore.
For any system user that needs to block these uncore optimizations that are impacting base core clock speed, we are exposing a method to disable this behavior called APBDis.
This locks the fabric clock to the non-boosted speeds.
Available settings are:
- 0: Disable APBDIS, locks the fabric clock to the non-boosted speeds.
- 1: Enable APBDIS, unlocks the fabric clock to the boosted speeds.
- Auto (Default setting): Use default value for APBDIS. The default value is 0.
- NUMA Nodes Per Socket:
-
Specifies the number of desired NUMA nodes per socket.
This option allows the user to divide the memory that each socket has into a certain number of NUMA memory nodes for optimal memory bandwidth.
Available settings are:
- NPS0: It will attempt to interleave the two sockets together.
- NPS1: Each processor socket will have one NUMA memory node.
- NPS2: Each processor socket will have two NUMA memory nodes.
- NPS4: Each processor socket will have four NUMA memory nodes.
- Auto (Default setting): Use default value for NUMA nodes per socket. The default value is NPS1.
- SMT Control:
-
This controls enable or disable the logical processor cores on the processor.
Enable SMT Control can improve overall performance for most workloads.
For some floating point or HPC workloads may result in highr performance if disable SMT Control.
Available settings are:
- Disabled: It will disable all logical cores on the processor.
- Auto (Default setting): Enable all logical cores on the processor.
- ACPI SRAT L3 cache As NUMA Domain:
-
Controls generation of distance information in the ACPI System Locality Information Table (SLIT) and NUMA
proximity domains in the System Resource Affinity Table (SRAT). Enabling this feature can increase performance
for workloads that are NUMA aware and optimized.
Available settings are:
- Disabled: Not seperate each CCX within the processor as a NUMA domain.
- Enabled: Each CCX within the processor will be declared as a NUMA domain.
- Auto (Default setting): Use default value. Which is not seperate each CCX as a NUMA domain.
For questions about the meanings of these flags, please contact the tester.
For other inquiries, please contact info@spec.org
Copyright 2017-2023 Standard Performance Evaluation Corporation
Tested with SPEC CPU2017 v1.1.9.
Report generated on 2023-11-07 18:44:25 by SPEC CPU2017 flags formatter v5178.
![[benchmark]](https://www.spec.org/auto/cpu2017/images/benchmark.png)