SPEC CPU®2017 Integer Rate Result

Copyright 2017-2021 Standard Performance Evaluation Corporation

IBM Corporation

IBM Power E1080 (3.55 - 4 GHz, 120 core, AIX)

SPECrate®2017_int_base = 170000

SPECrate®2017_int_peak = 217000
CPU2017 License: 11 Test Date: Aug-2021
Test Sponsor: IBM Corporation Hardware Availability: Sep-2021
Tested by: IBM Corporation Software Availability: Sep-2021

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Power10
  Max MHz: 4000
  Nominal: 3550
Enabled: 120 cores, 8 chips, 8 threads/core
Orderable: 4, 8 Chips
Cache L1: 96 KB I + 64 KB D on chip per core
  L2: 2 MB I+D on chip per core
  L3: 120 MB I+D on chip per chip shared NUCA / 15 cores
  Other: None
Memory: 8 TB (128 x 64 GB 1Rx4 PC4-3200V-R)
Storage: 1 x 512 GB NVMe SSD
Other: None
Software
OS: AIX 7.2 TL5 SP3
Compiler: C/C++: Version 17.1.0 of IBM Open XL C/C++ for
AIX;
Fortran: Version 17.1.0 of IBM Open XL Fortran
for AIX;
Parallel: No
Firmware: Version NH1010_041 released Sep-2021
File System: JFS2
System State: Run level 2 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 32/64-bit
Other: tcmalloc: tcmalloc memory allocator library v2.7.1
Power Management: Maximum Performance mode

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
SPECrate®2017_int_base 170000
SPECrate®2017_int_peak 217000
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
500.perlbench_r 960 1216 1260 1217 1260 1218 1260 960 964 1590 964 1590 969 1580
502.gcc_r 960 1075 1260 1119 1210 1078 1260 720 597 1710 596 1710 596 1710
505.mcf_r 960 1031 1500 1031 1500 1032 1500 960 672 2310 677 2290 668 2320
520.omnetpp_r 960 1224 1030 1227 1030 1225 1030 960 942 1340 941 1340 941 1340
523.xalancbmk_r 960 692 1460 696 1460 695 1460 960 465 2180 467 2170 465 2180
525.x264_r 960 635 2650 636 2640 636 2640 960 361 4660 360 4670 360 4670
531.deepsjeng_r 960 589 1870 591 1860 592 1860 960 546 2010 545 2020 545 2020
541.leela_r 960 797 2000 803 1980 798 1990 960 686 2320 685 2320 685 2320
548.exchange2_r 960 570 4410 571 4410 570 4410 960 554 4540 554 4540 554 4540
557.xz_r 960 798 1300 800 1300 804 1290 960 798 1300 800 1300 804 1290

Submit Notes

 The config file option 'submit' was used
 to assign benchmark copies to specific processors using
 the "bindprocessor" command (see flags file for details).

Operating System Notes

 AIX V7.2 TL5 SP3 running on Power10 in Power9 compatibility mode.
 Following ulimits set to unlimited.
 'ulimit -f unlimited' set file size to unlimited.
 'ulimit -s unlimited' set stack size to unlimited.
 'ulimit -c unlimited' set core file size to unlimited.
 'ulimit -d unlimited' set data segment size to unlimited.
 'ulimit -m unlimited' set max memory size to unlimited.

 72000 16M large pages defined with vmo command.
 'AIX_STDBUFSZ=524288' configures the I/O buffer size for the read and write system calls.
 'mount -o remount,noatime /dev/hd1' for filesystems with a high rate of file access, performance
 can be improved by disabling the update of the access time stamp.

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LIBPATH = "/home/cpu2017/v1.1.8/tcmalloc"
MALLOCMULTIHEAP = "1"
MEMORY_AFFINITY = "MCM"
XLFRTEOPTS = "intrinthds=1"

Environment variables set by runcpu during the 500.perlbench_r peak run:
MALLOCOPTIONS = "pool:0x20000000,buckets,no_mallinfo"

Environment variables set by runcpu during the 502.gcc_r peak run:
MALLOCTYPE = "watson2"

Environment variables set by runcpu during the 505.mcf_r peak run:
MALLOCTYPE = "watson2"

Environment variables set by runcpu during the 520.omnetpp_r peak run:
MALLOCOPTIONS = "pool:0x20000000"

Environment variables set by runcpu during the 523.xalancbmk_r peak run:
MALLOCOPTIONS = "pool:0x20000000"
MALLOCTYPE = "Yorktown"

Environment variables set by runcpu during the 525.x264_r peak run:
MALLOCTYPE = "watson2"

Environment variables set by runcpu during the 531.deepsjeng_r peak run:
MALLOCTYPE = "watson2"

Environment variables set by runcpu during the 541.leela_r peak run:
MALLOCTYPE = "watson2"

Environment variables set by runcpu during the 548.exchange2_r peak run:
MALLOCTYPE = "watson2"

General Notes


 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
 is mitigated in the system as tested and documented.

 tcmalloc, a general purpose malloc implementation
 built with the AIX V7.2 and IBM XL C/C++ compiler 16.1.0 for AIX
 used for all benchmarks in base
 sources available from https://github.com/gilamn5tr/gperftools/archive/refs/heads/aix-enablement-upstream.zip

Platform Notes


 Sysinfo program /home/cpu2017/v1.1.8/bin/sysinfo
 Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d
 running on compden1.aus.stglabs.ibm.com Fri Aug 13 10:26:37 2021

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 WARNING regarding the output of 'prtconf':
    (1) The tester may need to adjust the sysinfo-supplied 'hw_nominal_mhz'.
    (2) The 'Number of Processors' reported by prtconf is the number of cores available to
    the partition.
 From prtconf:
    Host Name: compden1.aus.stglabs.ibm.com
    System Model: IBM,9080-HEX
    Processor Clock Speed: 3650 MHz
    Number Of Processors: 120
    Memory Size: 8180736 MB
    BIOS Version: NH1010_041

 WARNING regarding the output of 'lscfg':  this utility reports resources for the system,
 not the current partition.  Therefore, for a partition that has a subset of the full
 system resources:
    (1) The tester may need to adjust the sysinfo-supplied 'hw_ncores'.
    (2) The tester may need to adjust the sysinfo-supplied 'hw_nchips'.
    (3) Be aware that 'hw_memory' is set from 'prtconf', and is correct for the partition,
    but "Memory DIMM info from lscfg" reports the number of DIMMs in the entire server.
 Processors, from lscfg -vplsysplanar0

    ^^^Note: sum of ways = 0, differs from prtconf 'Number Of Processors'
 Memory DIMM info from lscfg:
     128x 01GY910

 Operating System: AIX 7.2.0.0   7200-05-03-2135

 disk: df -k /home/cpu2017/v1.1.8
    Filesystem    1024-blocks      Free %Used    Iused %Iused Mounted on
    /dev/hd1        525336576 457662164   13%   125636     1% /home

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C       | 500.perlbench_r(peak) 502.gcc_r(peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
C       | 500.perlbench_r(base) 502.gcc_r(base) 505.mcf_r(base, peak)
        | 525.x264_r(base, peak) 557.xz_r(base, peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc64-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
C       | 500.perlbench_r(peak) 502.gcc_r(peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
C       | 500.perlbench_r(base) 502.gcc_r(base) 505.mcf_r(base, peak)
        | 525.x264_r(base, peak) 557.xz_r(base, peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc64-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
C++     | 520.omnetpp_r(peak) 523.xalancbmk_r(peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
C++     | 520.omnetpp_r(base) 523.xalancbmk_r(base) 531.deepsjeng_r(base,
        | peak) 541.leela_r(base, peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc64-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
C++     | 520.omnetpp_r(peak) 523.xalancbmk_r(peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
C++     | 520.omnetpp_r(base) 523.xalancbmk_r(base) 531.deepsjeng_r(base,
        | peak) 541.leela_r(base, peak)
------------------------------------------------------------------------------
IBM Open XL C/C++ for AIX 17.1.0 (5725-C72, 5765-J18), clang version 13.0.0
Target: powerpc64-ibm-aix7.2.0.0
Thread model: posix
InstalledDir: /opt/IBM/openxlC/17.1.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran | 548.exchange2_r(base, peak)
------------------------------------------------------------------------------
IBM Open XL Fortran for AIX 17.1.0 (5725-C74, 5765-J19)
Version: 17.01.0000.0000
Driver Level: 200728-1954 (252) ID: 915518f5b
Fortran Front End and Run Time Level: 200728-1954 (252) ID: 1be655d9d
Fortran Transformer Level: 200730-1513 (267) ID: d7d107fc9
LLVM IR Builder ID: e62648dbf4b9
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 /opt/IBM/openxlC/17.1.0/bin/ibm-clang 

C++ benchmarks:

 /opt/IBM/openxlC/17.1.0/bin/ibm-clang++_r 

Fortran benchmarks:

 /opt/IBM/openxlf/17.1.0/bin/xlf95_r 

Base Portability Flags

500.perlbench_r:  -DSPEC_AIX   -DSPEC_LP64 
502.gcc_r:  -DSPEC_AIX   -DSPEC_NEED_ASPRINTF   -DSPEC_LP64 
505.mcf_r:  -DSPEC_LP64 
520.omnetpp_r:  -DSPEC_LP64 
523.xalancbmk_r:  -DSPEC_AIX   -DSPEC_LP64 
525.x264_r:  -DSPEC_LP64 
531.deepsjeng_r:  -DSPEC_LP64 
541.leela_r:  -DSPEC_AIX   -DSPEC_LP64 
548.exchange2_r:  -DSPEC_LP64 
557.xz_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -m64   -Wl,-bbigtoc   -Wl,-blpdata   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bplugin_opt:--data-layout-opt=1   -Wl,-bplugin_opt:-fold-complex-pointer-compare=false   -mcpu=pwr9   -mabi=vec-extabi   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -flto   -mllvm -data-layout-opt=1   -O3   -fcommon   -mllvm -fold-complex-pointer-compare=false   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 

C++ benchmarks:

 -m64   -Wl,-bbigtoc   -Wl,-blpdata   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bplugin_opt:-fold-complex-pointer-compare=false   -mcpu=pwr9   -mabi=vec-extabi   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -flto   -O3   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 

Fortran benchmarks:

 -q64   -bbigtoc   -blpdata   -Wl,-bplugin_opt:-fold-complex-pointer-compare=false   -O3   -qarch=pwr9   -qvecnvol   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -qlto   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 

Peak Compiler Invocation

C benchmarks:

 /opt/IBM/openxlC/17.1.0/bin/ibm-clang 

C++ benchmarks:

 /opt/IBM/openxlC/17.1.0/bin/ibm-clang++_r 

Fortran benchmarks:

 /opt/IBM/openxlf/17.1.0/bin/xlf95_r 

Peak Portability Flags

500.perlbench_r:  -DSPEC_AIX 
502.gcc_r:  -DSPEC_AIX   -DSPEC_NEED_ASPRINTF 
505.mcf_r:  -DSPEC_LP64 
523.xalancbmk_r:  -DSPEC_AIX 
525.x264_r:  -DSPEC_LP64 
531.deepsjeng_r:  -DSPEC_LP64 
541.leela_r:  -DSPEC_AIX   -DSPEC_LP64 
548.exchange2_r:  -DSPEC_LP64 
557.xz_r:  -DSPEC_LP64 

Peak Optimization Flags

C benchmarks:

500.perlbench_r:  -m32   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bmaxdata:0xD0000000/dsa   -Wl,-bplugin_opt:--ppc-set-dscr=1   -Wl,-bplugin_opt:-inline-hot-callsites-aggressively   -Wl,-blpdata   -Wl,-bbigtoc   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -fno-strict-aliasing   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 
502.gcc_r:  -m32   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bmaxdata:0x50000000   -Wl,-bplugin_opt:-fold-complex-pointer-compare=false   -Wl,-blpdata   -Wl,-bbigtoc   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -mllvm -fold-complex-pointer-compare=false   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 
505.mcf_r:  -m64   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bplugin_opt:--data-layout-opt=3   -Wl,-blpdata   -Wl,-bbigtoc   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -mllvm -data-layout-opt=3   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 
525.x264_r:  -m64   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-blpdata   -Wl,-bbigtoc   -Wl,-bplugin_opt:-enable-aggressive-vectorization   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -fcommon   -frestrict-args   -mllvm -enable-aggressive-vectorization   -mllvm -ppc-enable-redxnintr   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 
557.xz_r:  basepeak = yes 

C++ benchmarks:

520.omnetpp_r:  -m32   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bmaxdata:0x30000000   -Wl,-bplugin_opt:--ppc-set-dscr=1   -Wl,-blpdata   -Wl,-bbigtoc   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -Wl,-bplugin_opt:-dynamic-cast-opt=on   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 
523.xalancbmk_r:  -m32   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bmaxdata:0x30000000   -Wl,-bplugin_opt:-inline-hot-callsites-aggressively   -Wl,-bplugin_opt:-enable-partial-inlining   -Wl,-blpdata   -Wl,-bbigtoc   -mllvm -enable-partial-inlining   -mllvm -enable-vec-find=true   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 
531.deepsjeng_r:  -m64   -Wl,-bplugin_opt:--ppc-set-dscr=1   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bplugin_opt:-inline-hot-callsites-aggressively   -Wl,-blpdata   -Wl,-bbigtoc   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 
541.leela_r:  -m64   -Wl,-bplugin_opt:--enable-ppc-gen-scalar-mass   -Wl,-bplugin_opt:-inline-hot-callsites-aggressively   -Wl,-blpdata   -Wl,-bbigtoc   -mllvm -aggressive-late-full-unroll   -mllvm -array-compress=true   -mllvm -enable-lvi-memoryssa=true   -O3   -mcpu=pwr9   -mabi=vec-extabi   -flto   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -fprofile-generate   -fprofile-use=default.profdata   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 

Fortran benchmarks:

 -q64   -Wl,-bplugin_opt:--ppc-set-dscr=1   -blpdata   -bbigtoc   -qlto   -O3   -qarch=pwr9   -qvecnvol   -mllvm -enable-ppc-gen-scalar-mass   -mllvm -vector-library=MASSV   -qprofile-generate   -qprofile-use=default.profdata   -L/opt/IBM/xlmass/10.1.0/lib   -lmass   -L/opt/IBM/openxlf/17.1.0/lib   -lxlopt 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/IBM_AIX_7.2_S-RevB.html,
http://www.spec.org/cpu2017/flags/IBM_Open_XL_AIX_flags-RevB.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/IBM_AIX_7.2_S-RevB.xml,
http://www.spec.org/cpu2017/flags/IBM_Open_XL_AIX_flags-RevB.xml.

SPEC CPU and SPECrate are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders.

For questions about this result, please contact the tester. For other inquiries, please contact info@spec.org
Copyright 2017-2021 Standard Performance Evaluation Corporation
Tested with SPEC CPU®2017 v1.1.8 on 2021-08-13 11:26:35-0400.
Report generated on 2021-09-01 14:13:05 by SPEC CPU®2017 HTML formatter v6442.
Originally published on 2021-09-01.