SPEC CPU®2017 Floating Point Rate Result
   Copyright 2017-2019 Standard Performance Evaluation Corporation
   
  
 
 
 
  Benchmark result graphs are available in the PDF report.
 
 
 
 
 
 
  
  
The config file option 'submit' was used.
'numactl' was used to bind copies to the cores.
See the configuration file for details.
  
 
  
  
'ulimit -s unlimited' was used to set environment stack size
'ulimit -l 2097152' was used to set environment locked pages in memory limit
runcpu command invoked through numactl i.e.:
numactl --interleave=all runcpu <etc>
Set dirty_ratio=8 to limit dirty cache to 8% of memory
Set swappiness=1 to swap only if necessary
Set zone_reclaim_mode=1 to free local node memory and avoid remote memory
sync then drop_caches=3 to reset caches before invoking runcpu
dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were
all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness).
Transparent huge pages set to 'always' for this run (OS default)
  
 
  
  
Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/root/cpu2017-1.0.5/amd_rate_aocc200_rome_B_lib/64;
/root/cpu2017-1.0.5/amd_rate_aocc200_rome_B_lib/32:"
MALLOC_CONF = "retain:true"
Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26
NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.
jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto
jemalloc 5.2.0 is available here:
https://github.com/jemalloc/jemalloc/releases/download/5.2.0/jemalloc-5.2.0.tar.bz2
  
 
  
  
BIOS settings:
 NUMA Nodes Per Socket set to 4
 CCX as NUMA Domain set to Enabled
 System Profile set to Custom
 CPU Power Management set to Maximum Performance
 Memory Frequency set to Maximum Performance
 Turbo Boost Enabled
 Cstates set to Enabled
 Memory Patrol Scrub Disabled
 Memory Refresh Rate set to 1x
 PCI ASPM L1 Link Power Management Disabled
 Determinism Slider set to Power Determinism
 Efficiency Optimized Mode Disabled
 Sysinfo program /root/cpu2017-1.0.5/bin/sysinfo
 Rev: r5974 of 2018-05-19 9bcde8f2999c33d61f64985e45859ea9
 running on linux-g3ob Sat Aug 31 02:25:41 2019
 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo
 From /proc/cpuinfo
    model name : AMD EPYC 7702P 64-Core Processor
       1  "physical id"s (chips)
       128 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 64
       siblings  : 128
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
       53 54 55 56 57 58 59 60 61 62 63
 From lscpu:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      Address sizes:       43 bits physical, 48 bits virtual
      CPU(s):              128
      On-line CPU(s) list: 0-127
      Thread(s) per core:  2
      Core(s) per socket:  64
      Socket(s):           1
      NUMA node(s):        16
      Vendor ID:           AuthenticAMD
      CPU family:          23
      Model:               49
      Model name:          AMD EPYC 7702P 64-Core Processor
      Stepping:            0
      CPU MHz:             1996.408
      BogoMIPS:            3992.81
      Virtualization:      AMD-V
      L1d cache:           32K
      L1i cache:           32K
      L2 cache:            512K
      L3 cache:            16384K
      NUMA node0 CPU(s):   0-3,64-67
      NUMA node1 CPU(s):   4-7,68-71
      NUMA node2 CPU(s):   8-11,72-75
      NUMA node3 CPU(s):   12-15,76-79
      NUMA node4 CPU(s):   16-19,80-83
      NUMA node5 CPU(s):   20-23,84-87
      NUMA node6 CPU(s):   24-27,88-91
      NUMA node7 CPU(s):   28-31,92-95
      NUMA node8 CPU(s):   32-35,96-99
      NUMA node9 CPU(s):   36-39,100-103
      NUMA node10 CPU(s):  40-43,104-107
      NUMA node11 CPU(s):  44-47,108-111
      NUMA node12 CPU(s):  48-51,112-115
      NUMA node13 CPU(s):  52-55,116-119
      NUMA node14 CPU(s):  56-59,120-123
      NUMA node15 CPU(s):  60-63,124-127
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm
      constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni
      pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c
      rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
      osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_l2 mwaitx cpb
      cat_l3 cdp_l3 hw_pstate sme ssbd sev ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep
      bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves
      cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr arat npt
      lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter
      pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca
 /proc/cpuinfo cache data
    cache size : 512 KB
 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 16 nodes (0-15)
   node 0 cpus: 0 1 2 3 64 65 66 67
   node 0 size: 15691 MB
   node 0 free: 15426 MB
   node 1 cpus: 4 5 6 7 68 69 70 71
   node 1 size: 16126 MB
   node 1 free: 15773 MB
   node 2 cpus: 8 9 10 11 72 73 74 75
   node 2 size: 16126 MB
   node 2 free: 15934 MB
   node 3 cpus: 12 13 14 15 76 77 78 79
   node 3 size: 16125 MB
   node 3 free: 15925 MB
   node 4 cpus: 16 17 18 19 80 81 82 83
   node 4 size: 16126 MB
   node 4 free: 15579 MB
   node 5 cpus: 20 21 22 23 84 85 86 87
   node 5 size: 16126 MB
   node 5 free: 15847 MB
   node 6 cpus: 24 25 26 27 88 89 90 91
   node 6 size: 16126 MB
   node 6 free: 15847 MB
   node 7 cpus: 28 29 30 31 92 93 94 95
   node 7 size: 16125 MB
   node 7 free: 15899 MB
   node 8 cpus: 32 33 34 35 96 97 98 99
   node 8 size: 16126 MB
   node 8 free: 15861 MB
   node 9 cpus: 36 37 38 39 100 101 102 103
   node 9 size: 16126 MB
   node 9 free: 15886 MB
   node 10 cpus: 40 41 42 43 104 105 106 107
   node 10 size: 16126 MB
   node 10 free: 15919 MB
   node 11 cpus: 44 45 46 47 108 109 110 111
   node 11 size: 16095 MB
   node 11 free: 15668 MB
   node 12 cpus: 48 49 50 51 112 113 114 115
   node 12 size: 16126 MB
   node 12 free: 15860 MB
   node 13 cpus: 52 53 54 55 116 117 118 119
   node 13 size: 16126 MB
   node 13 free: 15884 MB
   node 14 cpus: 56 57 58 59 120 121 122 123
   node 14 size: 16126 MB
   node 14 free: 15920 MB
   node 15 cpus: 60 61 62 63 124 125 126 127
   node 15 size: 16111 MB
   node 15 free: 15853 MB
   node distances:
   node   0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15
     0:  10  11  11  11  12  12  12  12  12  12  12  12  12  12  12  12
     1:  11  10  11  11  12  12  12  12  12  12  12  12  12  12  12  12
     2:  11  11  10  11  12  12  12  12  12  12  12  12  12  12  12  12
     3:  11  11  11  10  12  12  12  12  12  12  12  12  12  12  12  12
     4:  12  12  12  12  10  11  11  11  12  12  12  12  12  12  12  12
     5:  12  12  12  12  11  10  11  11  12  12  12  12  12  12  12  12
     6:  12  12  12  12  11  11  10  11  12  12  12  12  12  12  12  12
     7:  12  12  12  12  11  11  11  10  12  12  12  12  12  12  12  12
     8:  12  12  12  12  12  12  12  12  10  11  11  11  12  12  12  12
     9:  12  12  12  12  12  12  12  12  11  10  11  11  12  12  12  12
    10:  12  12  12  12  12  12  12  12  11  11  10  11  12  12  12  12
    11:  12  12  12  12  12  12  12  12  11  11  11  10  12  12  12  12
    12:  12  12  12  12  12  12  12  12  12  12  12  12  10  11  11  11
    13:  12  12  12  12  12  12  12  12  12  12  12  12  11  10  11  11
    14:  12  12  12  12  12  12  12  12  12  12  12  12  11  11  10  11
    15:  12  12  12  12  12  12  12  12  12  12  12  12  11  11  11  10
 From /proc/meminfo
    MemTotal:       263721456 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB
 From /etc/*release* /etc/*version*
    os-release:
       NAME="SLES"
       VERSION="15-SP1"
       VERSION_ID="15.1"
       PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1"
       ID="sles"
       ID_LIKE="suse"
       ANSI_COLOR="0;32"
       CPE_NAME="cpe:/o:suse:sles:15:sp1"
 uname -a:
    Linux linux-g3ob 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 (8fba516)
    x86_64 x86_64 x86_64 GNU/Linux
 Kernel self-reported vulnerability status:
 CVE-2017-5754 (Meltdown):          Not affected
 CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization
 CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB: conditional,
 IBRS_FW, STIBP: conditional, RSB filling
 run-level 5 Aug 30 22:38
 SPEC is set to: /root/cpu2017-1.0.5
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda2      xfs   440G   19G  422G   5% /
 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   BIOS Dell Inc. 1.0.3 08/23/2019
   Memory:
    5x 80AD80B380AD HMA84GR7CJR4N-XN 32 GB 2 rank 3200
    1x 80AD863280AD HMA84GR7CJR4N-XN 32 GB 2 rank 3200
    2x 80AD869D80AD HMA84GR7CJR4N-XN 32 GB 2 rank 3200
    8x Not Specified Not Specified
 (End of data from sysinfo program)
  
 
  
  
==============================================================================
C               | 519.lbm_r(base, peak) 538.imagick_r(base, peak)
                | 544.nab_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++             | 508.namd_r(base, peak) 510.parest_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++, C          | 511.povray_r(base, peak) 526.blender_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++, C, Fortran | 507.cactuBSSN_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
Fortran         | 503.bwaves_r(base, peak) 549.fotonik3d_r(base, peak)
                | 554.roms_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
Fortran, C      | 521.wrf_r(base, peak) 527.cam4_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
  
 
 
 
  
  
  
  
  
   
   |  | -std=c++98 
     -flto 
     -Wl,-mllvm -Wl,-function-specialize 
     -Wl,-mllvm -Wl,-region-vectorize 
     -Wl,-mllvm -Wl,-vector-library=LIBMVEC 
     -Wl,-mllvm -Wl,-reduce-array-computations=3 
     -Wl,-mllvm -Wl,-suppress-fmas 
     -O3 
     -ffast-math 
     -march=znver2 
     -mllvm -loop-unswitch-threshold=200000 
     -mllvm -vector-library=LIBMVEC 
     -mllvm -unroll-threshold=100 
     -flv-function-specialization 
     -mllvm -enable-partial-unswitch 
     -z muldefs 
     -lmvec 
     -lamdlibm 
     -ljemalloc 
     -lflang | 
  
  
  
  
  
  
  
   
   |  | -std=c++98 
     -flto 
     -Wl,-mllvm -Wl,-function-specialize 
     -Wl,-mllvm -Wl,-region-vectorize 
     -Wl,-mllvm -Wl,-vector-library=LIBMVEC 
     -Wl,-mllvm -Wl,-reduce-array-computations=3 
     -Wl,-mllvm -Wl,-suppress-fmas 
     -O3 
     -ffast-math 
     -march=znver2 
     -fstruct-layout=3 
     -mllvm -unroll-threshold=50 
     -fremap-arrays 
     -mllvm -function-specialize 
     -mllvm -enable-gvn-hoist 
     -mllvm -reduce-array-computations=3 
     -mllvm -global-vectorize-slp 
     -mllvm -vector-library=LIBMVEC 
     -mllvm -inline-threshold=1000 
     -flv-function-specialization 
     -mllvm -loop-unswitch-threshold=200000 
     -mllvm -unroll-threshold=100 
     -mllvm -enable-partial-unswitch 
     -z muldefs 
     -lmvec 
     -lamdlibm 
     -ljemalloc 
     -lflang | 
  
  
  
   
   |  | -std=c++98 
     -flto 
     -Wl,-mllvm -Wl,-function-specialize 
     -Wl,-mllvm -Wl,-region-vectorize 
     -Wl,-mllvm -Wl,-vector-library=LIBMVEC 
     -Wl,-mllvm -Wl,-reduce-array-computations=3 
     -Wl,-mllvm -Wl,-suppress-fmas 
     -O3 
     -ffast-math 
     -march=znver2 
     -fstruct-layout=3 
     -mllvm -unroll-threshold=50 
     -fremap-arrays 
     -mllvm -function-specialize 
     -mllvm -enable-gvn-hoist 
     -mllvm -reduce-array-computations=3 
     -mllvm -global-vectorize-slp 
     -mllvm -vector-library=LIBMVEC 
     -mllvm -inline-threshold=1000 
     -flv-function-specialization 
     -mllvm -loop-unswitch-threshold=200000 
     -mllvm -unroll-threshold=100 
     -mllvm -enable-partial-unswitch 
     -funroll-loops 
     -Mrecursive 
     -z muldefs 
     -Kieee 
     -fno-finite-math-only 
     -lmvec 
     -lamdlibm 
     -ljemalloc 
     -lflang | 
  
  
 
 
  
  Same as Base Portability Flags
  
 
  
  
  
  
  
  
  
   
   | 503.bwaves_r: | -flto 
     -Wl,-mllvm -Wl,-function-specialize 
     -Wl,-mllvm -Wl,-region-vectorize 
     -Wl,-mllvm -Wl,-vector-library=LIBMVEC 
     -Wl,-mllvm -Wl,-reduce-array-computations=3 
     -O3 
     -march=znver2 
     -funroll-loops 
     -Mrecursive 
     -mllvm -vector-library=LIBMVEC 
     -Kieee 
     -fno-finite-math-only 
     -lmvec 
     -lamdlibm 
     -ljemalloc 
     -lflang | 
   
   | 549.fotonik3d_r: | Same as 503.bwaves_r | 
   
   | 554.roms_r: | -flto 
     -Wl,-mllvm -Wl,-function-specialize 
     -Wl,-mllvm -Wl,-region-vectorize 
     -Wl,-mllvm -Wl,-vector-library=LIBMVEC 
     -Wl,-mllvm -Wl,-reduce-array-computations=3 
     -Wl,-mllvm -Wl,-enable-X86-prefetching 
     -O3 
     -march=znver2 
     -funroll-loops 
     -Mrecursive 
     -mllvm -vector-library=LIBMVEC 
     -Kieee 
     -fno-finite-math-only 
     -lmvec 
     -lamdlibm 
     -ljemalloc 
     -lflang | 
  
  
  
  
  
   
   | 511.povray_r: | -std=c++98 
     -flto 
     -Wl,-mllvm -Wl,-function-specialize 
     -Wl,-mllvm -Wl,-region-vectorize 
     -Wl,-mllvm -Wl,-vector-library=LIBMVEC 
     -Wl,-mllvm -Wl,-reduce-array-computations=3 
     -Wl,-mllvm -Wl,-x86-use-vzeroupper=false 
     -Ofast 
     -march=znver2 
     -mno-sse4a 
     -fstruct-layout=5 
     -mllvm -vectorize-memory-aggressively 
     -mllvm -function-specialize 
     -mllvm -enable-gvn-hoist 
     -mllvm -unroll-threshold=50 
     -fremap-arrays 
     -mllvm -vector-library=LIBMVEC 
     -mllvm -reduce-array-computations=3 
     -mllvm -global-vectorize-slp 
     -mllvm -inline-threshold=1000 
     -flv-function-specialization 
     -mllvm -unroll-threshold=100 
     -mllvm -enable-partial-unswitch 
     -mllvm -loop-unswitch-threshold=200000 
     -lmvec 
     -lamdlibm 
     -ljemalloc 
     -lflang | 
   
   | 526.blender_r: | -std=c++98 
     -flto 
     -Wl,-mllvm -Wl,-function-specialize 
     -Wl,-mllvm -Wl,-region-vectorize 
     -Wl,-mllvm -Wl,-vector-library=LIBMVEC 
     -Wl,-mllvm -Wl,-reduce-array-computations=3 
     -Ofast 
     -march=znver2 
     -mno-sse4a 
     -fstruct-layout=5 
     -mllvm -vectorize-memory-aggressively 
     -mllvm -function-specialize 
     -mllvm -enable-gvn-hoist 
     -mllvm -unroll-threshold=50 
     -fremap-arrays 
     -mllvm -vector-library=LIBMVEC 
     -mllvm -reduce-array-computations=3 
     -mllvm -global-vectorize-slp 
     -mllvm -inline-threshold=1000 
     -flv-function-specialization 
     -mllvm -unroll-threshold=100 
     -mllvm -enable-partial-unswitch 
     -mllvm -loop-unswitch-threshold=200000 
     -lmvec 
     -lamdlibm 
     -ljemalloc 
     -lflang | 
  
  
  
   
   | 507.cactuBSSN_r: | basepeak = yes |