# Invocation command line: # /spec17/bin/runspec --define external --rate 48 -c cpu2006-1.2-ic17.0-lin-ws-core-avx2-rate-20160922 --define smt --define cores=24 --define physicalfirst --define invoke_with_interleave --define drop_caches --define THP_enabled -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20160922 Intel(R) C/C++ and Fortran 17.0 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160922 ext = cpu2006-1.2-ic17.0-lin-ws-core-avx2-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64.xml flagsurl001 = http://www.spec.org/cpu2006/flags/Huawei-Platform-Settings-SKL-V1.6.xml %ifdef %{default-platform-flags} flagsurl2=Default-Platform-Flags.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh10.2 # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OBJ = .o SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 PORTABILITY = -D_FILE_OFFSET_BITS=64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xCORE-AVX2 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # portability & libraries ################################################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language int=base=default=default: COPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 fp=base=default=default: OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -qopt-mem-layout-trans=3 CXXOPTIMIZE= -qopt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -qopt-prefetch -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 403.gcc=peak=default: feedback=0 COPTIMIZE = -qopt-mem-layout-trans=3 OPTIMIZE= $(FAST_NO_STATIC) 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS2_CFLAGS = -prof-use $(SSE) PASS2_CXXFLAGS = -prof-use $(SSE) PASS2_FFLAGS = -prof-use $(SSE) PASS2_LDFLAGS = -prof-use $(SSE) 456.hmmer=peak=default: feedback=0 CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll2 -auto-ilp32 -qopt-mem-layout-trans=3 OPTIMIZE= $(FAST_NO_STATIC) PORTABILITY= 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -qopt-mem-layout-trans=3 471.omnetpp=peak=default: CXXOPTIMIZE= -qopt-ra-region-strategy=block -qopt-mem-layout-trans=3 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_FFLAGS = -prof-gen -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDFLAGS = -prof-gen -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST_NO_STATIC) 410.bwaves=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: OPTIMIZE= -qopt-prefetch PASS2_CFLAGS = -prof-use $(SSE) PASS2_CXXFLAGS = -prof-use $(SSE) PASS2_FFLAGS = -prof-use $(SSE) PASS2_LDFLAGS = -prof-use $(SSE) 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 -qopt-mem-layout-trans=3 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OPTIMIZE= -qopt-malloc-options=3 CXXOPTIMIZE= -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -qopt-mem-layout-trans=3 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -qopt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3175 test_sponsor = Huawei hw_avail = Aug-2017 sw_avail = Nov-2016 tester = Huawei hw_cpu_name = Intel Trademarked CPU Name hw_cpu_char = Intel Turbo Boost Technology up to 3.70 GHz hw_cpu_mhz = 2600 hw_disk = 9999 GB SATA, 9999RPM hw_fpu = Integrated hw_memory000 = 384 GB (24 x 16 GB 2Rx8 PC4-2666V-R) hw_model = Huawei 1288H V5 (Intel Xeon Gold 6126) hw_ncpuorder = 1,2 chip hw_ncores = 24 hw_nchips = 9999 hw_ncoresperchip = 12 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per core hw_tcache = 19.25 MB I+D on chip per chip hw_ocache = None hw_vendor = Huawei prepared_by = Insert Entity Name sw_file = xfs sw_os001 = Redhat Enterprise Linux 7.2 sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler001 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler002 = Compiler for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_025 = Transparent Huge Pages enabled with: notes_030 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_200 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_035 = Filesystem page cache cleared with: notes_040 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_045 = runspec command invoked through numactl i.e.: notes_050 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 17.0.0.098 of Intel Fortran sw_compiler003 = Compiler for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993' default: notes_plat_sysinfo_000 = Sysinfo program /spec17/config/sysinfo.rev6993 notes_plat_sysinfo_005 = Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) notes_plat_sysinfo_010 = running on localhost.localdomain Fri Jun 23 23:14:10 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) Gold 6126 CPU @ 2.60GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 4 5 6 8 9 10 11 13 14 notes_plat_sysinfo_090 = physical 1: cores 0 1 3 5 6 8 9 10 11 12 13 14 notes_plat_sysinfo_095 = cache size : 19712 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 394144692 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = From /etc/*release* /etc/*version* notes_plat_sysinfo_135 = os-release: notes_plat_sysinfo_140 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_145 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_150 = ID="rhel" notes_plat_sysinfo_155 = ID_LIKE="fedora" notes_plat_sysinfo_160 = VERSION_ID="7.3" notes_plat_sysinfo_165 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_170 = ANSI_COLOR="0;31" notes_plat_sysinfo_175 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_180 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_185 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = uname -a: notes_plat_sysinfo_205 = Linux localhost.localdomain 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 notes_plat_sysinfo_210 = EDT 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = run-level 3 Jun 21 15:19 notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = SPEC is set to: /spec17 notes_plat_sysinfo_235 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_240 = /dev/sda2 xfs 898G 16G 883G 2% / notes_plat_sysinfo_245 = Additional information from dmidecode: notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_260 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_265 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_270 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = BIOS INSYDE Corp. 0.15 05/09/2017 notes_plat_sysinfo_285 = Memory: notes_plat_sysinfo_290 = 24x Samsung M393A2K43BB1-CTD 16 GB 2 rank 2666 MHz notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Gold 6126 hw_disk = 1 x 1200 GB SAS, 10000 RPM hw_nchips = 2 prepared_by = Huawei sw_file = xfs sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.el7.x86_64 sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 437.leslie3d: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/spec17/libs/32:/spec17/libs/64:/spec17/sh10.2" notes_010 = notes_plat_form_000 = BIOS configuration: notes_plat_form_005 = Set Power Efficiency Mode to Performance notes_plat_form_010 = Set SNC to Enable notes_plat_form_015 = Set IMC Interleaving to 1 way notes_plat_form_020 = Set Patrol Scrub to Disable