# Invocation command line: # /root/cpu2006-1.2/bin/runspec --define default-platform-flags --rate --copies 192 -c cpu2006-1.2-ic17.0-lin-ws-core-avx2-rate-20160922.cfg --define smt-on --define cores=96 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20160922 Intel(R) C/C++ and Fortran 17.0 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160922 ext = cpu2006-1.2-ic17.0-lin-ws-core-avx2-rate-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64.xml flagsurl001 = http://www.spec.org/cpu2006/flags/Dell-Platform-Settings-V1.2-revD.20151006.xml %ifdef %{external} flagsurl2=Dell-Platform-Settings-V1.2-revE.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh10.2 # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OBJ = .o SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 PORTABILITY = -D_FILE_OFFSET_BITS=64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xCORE-AVX2 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # portability & libraries ################################################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language int=base=default=default: COPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -qopt-mem-layout-trans=3 fp=base=default=default: OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -qopt-mem-layout-trans=3 CXXOPTIMIZE= -qopt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -qopt-prefetch -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 403.gcc=peak=default: feedback=0 COPTIMIZE = -qopt-mem-layout-trans=3 OPTIMIZE= $(FAST_NO_STATIC) 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS2_CFLAGS = -prof-use $(SSE) PASS2_CXXFLAGS = -prof-use $(SSE) PASS2_FFLAGS = -prof-use $(SSE) PASS2_LDFLAGS = -prof-use $(SSE) 456.hmmer=peak=default: feedback=0 CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll2 -auto-ilp32 -qopt-mem-layout-trans=3 OPTIMIZE= $(FAST_NO_STATIC) PORTABILITY= 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 -qopt-mem-layout-trans=3 PORTABILITY= 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -qopt-mem-layout-trans=3 471.omnetpp=peak=default: CXXOPTIMIZE= -qopt-ra-region-strategy=block -qopt-mem-layout-trans=3 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-ilp32 -qopt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_FFLAGS = -prof-gen -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDFLAGS = -prof-gen -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST_NO_STATIC) 410.bwaves=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: OPTIMIZE= -qopt-prefetch PASS2_CFLAGS = -prof-use $(SSE) PASS2_CXXFLAGS = -prof-use $(SSE) PASS2_FFLAGS = -prof-use $(SSE) PASS2_LDFLAGS = -prof-use $(SSE) 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 -qopt-mem-layout-trans=3 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 OPTIMIZE= -qopt-malloc-options=3 CXXOPTIMIZE= -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -qopt-mem-layout-trans=3 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch COPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -qopt-mem-layout-trans=3 #################################################################################################################################### %ifdef %{smt-on} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \* $SPECCOPYNUM` -- $command %ifdef %{no-numa} submit = taskset -c `expr 2 \* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -qopt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 55 test_sponsor = Dell Inc. hw_avail = Jan-2017 sw_avail = Sep-2016 tester = Dell Inc. hw_cpu_name = Intel Xeon E7-8894 v4 hw_cpu_char = Intel Turbo Boost Technology up to 3.40 GHz hw_cpu_mhz = 2400 hw_disk = 1 x 480 GB SATA SSD hw_fpu = Integrated hw_memory000 = 512 GB (32 x 16 GB 2Rx4 PC4-2133T-R, running at hw_memory001 = 1600 MHz) hw_model = PowerEdge R930 (Intel Xeon E7-8894 v4, 2.40 GHz) hw_ncpuorder = 2,4 chip hw_ncores = 96 hw_nchips = 2 hw_ncoresperchip = 24 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 60 MB I+D on chip per chip hw_ocache = None hw_vendor = Dell Inc. prepared_by = Dell Inc. sw_file = xfs sw_os001 = SUSE Enterprise Linux Server 12 SP1 (x86_64) Kernel 3.12.49-11-default sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_plat_form_000 = BIOS settings: notes_plat_form_005 = Snoop Mode set to Cluster on Die notes_plat_form_010 = Virtualization Technology disabled notes_plat_form_015 = System Profile set to Custom notes_plat_form_020 = CPU Performance set to Maximum Performance notes_plat_form_025 = C States set to disabled notes_plat_form_030 = C1E disabled notes_plat_form_035 = Energy Efficient Turbo disabled notes_plat_form_040 = Uncore Frequency set to Dynamic notes_plat_form_045 = Energy Efficiency Policy set to Performance notes_plat_form_050 = Memory Patrol Scrub disabled int=default=default=default: sw_compiler001 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler002 = Compiler for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_025 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_030 = Filesystem page cache cleared with: notes_035 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_040 = runspec command invoked through numactl i.e.: notes_045 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 17.0.0.098 of Intel Fortran sw_compiler003 = Compiler for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993' default: notes_plat_sysinfo_000 = Sysinfo program /root/cpu2006-1.2/config/sysinfo.rev6993 notes_plat_sysinfo_005 = Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) notes_plat_sysinfo_010 = running on linux-lbo5 Sun Jan 8 18:18:13 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E7-8894 v4 @ 2.40GHz notes_plat_sysinfo_050 = 4 "physical id"s (chips) notes_plat_sysinfo_055 = 192 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 48 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_090 = 27 28 29 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_100 = 27 28 29 notes_plat_sysinfo_105 = physical 2: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_110 = 27 28 29 notes_plat_sysinfo_115 = physical 3: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_120 = 27 28 29 notes_plat_sysinfo_125 = cache size : 30720 KB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /proc/meminfo notes_plat_sysinfo_140 = MemTotal: 529059184 kB notes_plat_sysinfo_145 = HugePages_Total: 0 notes_plat_sysinfo_150 = Hugepagesize: 2048 kB notes_plat_sysinfo_155 = notes_plat_sysinfo_160 = /usr/bin/lsb_release -d notes_plat_sysinfo_165 = SUSE Linux Enterprise Server 12 SP1 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = From /etc/*release* /etc/*version* notes_plat_sysinfo_180 = SuSE-release: notes_plat_sysinfo_185 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_190 = VERSION = 12 notes_plat_sysinfo_195 = PATCHLEVEL = 1 notes_plat_sysinfo_200 = # This file is deprecated and will be removed in a future service pack or notes_plat_sysinfo_205 = release. notes_plat_sysinfo_210 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_215 = os-release: notes_plat_sysinfo_220 = NAME="SLES" notes_plat_sysinfo_225 = VERSION="12-SP1" notes_plat_sysinfo_230 = VERSION_ID="12.1" notes_plat_sysinfo_235 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP1" notes_plat_sysinfo_240 = ID="sles" notes_plat_sysinfo_245 = ANSI_COLOR="0;32" notes_plat_sysinfo_250 = CPE_NAME="cpe:/o:suse:sles:12:sp1" notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = uname -a: notes_plat_sysinfo_265 = Linux linux-lbo5 3.12.49-11-default #1 SMP Wed Nov 11 20:52:43 UTC 2015 notes_plat_sysinfo_270 = (8d714a0) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = run-level 3 Jan 8 11:27 notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = SPEC is set to: /root/cpu2006-1.2 notes_plat_sysinfo_295 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_300 = /dev/sda2 xfs 439G 14G 426G 4% / notes_plat_sysinfo_305 = Additional information from dmidecode: notes_plat_sysinfo_310 = notes_plat_sysinfo_315 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_320 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_325 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_330 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_335 = notes_plat_sysinfo_340 = BIOS Dell Inc. 2.2.0 09/29/2016 notes_plat_sysinfo_345 = Memory: notes_plat_sysinfo_350 = 32x 00AD00B300AD HMA42GR7MFR4N-TF 16 GB 2 rank 2133 MHz, configured at 1600 notes_plat_sysinfo_355 = MHz notes_plat_sysinfo_360 = 64x Not Specified Not Specified notes_plat_sysinfo_365 = notes_plat_sysinfo_370 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E7-8894 v4 hw_disk = 1 x 480 GB SATA SSD hw_nchips = 4 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os000 = SUSE Linux Enterprise Server 12 SP1 sw_os001 = 3.12.49-11-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/root/cpu2006-1.2/libs/32:/root/cpu2006-1.2/libs/64:/root/cpu2006-1.2/sh10.2" notes_010 =