SPEC(R) CFP2006 Summary Dell Inc. PowerEdge R530xd (Intel Xeon E5-2640 v3, 2.60 GHz) Tue May 5 09:19:15 2015 CPU2006 License: 55 Test date: May-2015 Test sponsor: Dell Inc. Hardware availability: May-2015 Tested by: Dell Inc. Software availability: Nov-2014 Base Base Base Peak Peak Peak Benchmarks Copies Run Time Rate Copies Run Time Rate -------------- ------ --------- --------- ------ --------- --------- 410.bwaves 32 870 500 * 32 870 500 * 410.bwaves 32 874 498 S 32 874 498 S 410.bwaves 32 870 500 S 32 870 500 S 416.gamess 32 1081 580 S 32 1010 620 S 416.gamess 32 1093 573 S 32 1020 614 * 416.gamess 32 1082 579 * 32 1022 613 S 433.milc 32 608 483 S 32 608 483 S 433.milc 32 605 485 * 32 605 485 * 433.milc 32 605 485 S 32 605 485 S 434.zeusmp 32 433 673 S 32 433 673 S 434.zeusmp 32 431 676 S 32 431 676 S 434.zeusmp 32 431 675 * 32 431 675 * 435.gromacs 32 331 690 S 32 321 711 S 435.gromacs 32 329 695 S 32 324 706 * 435.gromacs 32 329 694 * 32 326 700 S 436.cactusADM 32 485 789 * 32 485 789 * 436.cactusADM 32 484 790 S 32 484 790 S 436.cactusADM 32 485 788 S 32 485 788 S 437.leslie3d 32 862 349 S 16 397 379 * 437.leslie3d 32 860 350 * 16 397 379 S 437.leslie3d 32 860 350 S 16 398 377 S 444.namd 32 538 477 * 32 530 485 S 444.namd 32 536 478 S 32 527 487 S 444.namd 32 539 477 S 32 527 487 * 447.dealII 32 400 916 S 32 400 916 S 447.dealII 32 402 911 S 32 402 911 S 447.dealII 32 401 912 * 32 401 912 * 450.soplex 32 765 349 S 16 352 379 * 450.soplex 32 765 349 * 16 353 379 S 450.soplex 32 766 348 S 16 351 380 S 453.povray 32 210 810 * 32 188 904 * 453.povray 32 212 802 S 32 190 898 S 453.povray 32 210 812 S 32 187 911 S 454.calculix 32 291 908 * 32 291 908 * 454.calculix 32 291 908 S 32 291 908 S 454.calculix 32 289 914 S 32 289 914 S 459.GemsFDTD 32 1006 337 S 32 1006 337 S 459.GemsFDTD 32 1006 337 * 32 1006 337 * 459.GemsFDTD 32 1007 337 S 32 1007 337 S 465.tonto 32 505 623 S 32 476 662 S 465.tonto 32 505 624 * 32 473 666 S 465.tonto 32 505 624 S 32 474 664 * 470.lbm 32 673 654 * 32 673 654 * 470.lbm 32 673 654 S 32 673 654 S 470.lbm 32 673 653 S 32 673 653 S 481.wrf 32 611 585 * 32 606 590 S 481.wrf 32 606 590 S 32 607 589 S 481.wrf 32 613 583 S 32 607 589 * 482.sphinx3 32 1121 556 S 32 1121 556 S 482.sphinx3 32 1123 555 * 32 1121 556 * 482.sphinx3 32 1125 554 S 32 1126 554 S ============================================================================== 410.bwaves 32 870 500 * 32 870 500 * 416.gamess 32 1082 579 * 32 1020 614 * 433.milc 32 605 485 * 32 605 485 * 434.zeusmp 32 431 675 * 32 431 675 * 435.gromacs 32 329 694 * 32 324 706 * 436.cactusADM 32 485 789 * 32 485 789 * 437.leslie3d 32 860 350 * 16 397 379 * 444.namd 32 538 477 * 32 527 487 * 447.dealII 32 401 912 * 32 401 912 * 450.soplex 32 765 349 * 16 352 379 * 453.povray 32 210 810 * 32 188 904 * 454.calculix 32 291 908 * 32 291 908 * 459.GemsFDTD 32 1006 337 * 32 1006 337 * 465.tonto 32 505 624 * 32 474 664 * 470.lbm 32 673 654 * 32 673 654 * 481.wrf 32 611 585 * 32 607 589 * 482.sphinx3 32 1123 555 * 32 1121 556 * SPECfp(R)_rate_base2006 578 SPECfp_rate2006 594 HARDWARE -------- CPU Name: Intel Xeon E5-2640 v3 CPU Characteristics: Intel Turbo Boost Technology up to 3.40 GHz CPU MHz: 2600 FPU: Integrated CPU(s) enabled: 16 cores, 2 chips, 8 cores/chip, 2 threads/core CPU(s) orderable: 1,2 chip Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core L3 Cache: 20 MB I+D on chip per chip Other Cache: None Memory: 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R, running at 1866 MHz) Disk Subsystem: 500 GB 7200 RPM SATA Other Hardware: None SOFTWARE -------- Operating System: Red Hat Enterprise Linux Server release 7.0 (Maipo) 3.10.0-123.el7.x86_64 Compiler: C/C++: Version 15.0.0.090 of Intel C++ Studio XE for Linux; Fortran: Version 15.0.0.090 of Intel Fortran Studio XE for Linux Auto Parallel: No File System: ext4 System State: Run level 3 (multi-user) Base Pointers: 32/64-bit Peak Pointers: 32/64-bit Other Software: None Submit Notes ------------ The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file. Operating System Notes ---------------------- Stack size set to unlimited using "ulimit -s unlimited" Platform Notes -------------- BIOS settings: Snoop Mode set to Cluster on Die Virtualization Technology disabled System Profile set to Performance Sysinfo program /root/cpu2006-1.2/config/sysinfo.rev6914 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 running on localhost.localdomain Tue May 5 21:19:16 2015 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz 2 "physical id"s (chips) 32 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 8 siblings : 16 physical 0: cores 0 1 2 3 4 5 6 7 physical 1: cores 0 1 2 3 4 5 6 7 cache size : 20480 KB From /proc/meminfo MemTotal: 264045624 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.0 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.0" PRETTY_NAME="Red Hat Enterprise Linux Server 7.0 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.0:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.0:ga:server uname -a: Linux localhost.localdomain 3.10.0-123.el7.x86_64 #1 SMP Mon May 5 11:16:57 EDT 2014 x86_64 x86_64 x86_64 GNU/Linux run-level 3 May 5 10:24 SPEC is set to: /root/cpu2006-1.2 Filesystem Type Size Used Avail Use% Mounted on /dev/sda1 ext4 489G 8.1G 456G 2% / Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS Dell Inc. 1.0.0 04/16/2015 Memory: 13x 00AD00B300AD HMA42GR7MFR4N-TFTD 16 GB 2 rank 2133 MHz, configured at 1866 MHz 3x 00AD063200AD HMA42GR7MFR4N-TFT1 16 GB 2 rank 2133 MHz, configured at 1866 MHz (End of data from sysinfo program) General Notes ------------- Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/root/cpu2006-1.2/libs/32:/root/cpu2006-1.2/libs/64:/root/cpu2006-1.2/sh" Binaries compiled on a system with 1x Core i5-4670K CPU + 16GB memory using RedHat EL 7.0 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec Base Compiler Invocation ------------------------ C benchmarks: icc -m64 C++ benchmarks: icpc -m64 Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Base Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 450.soplex: -DSPEC_CPU_LP64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 482.sphinx3: -DSPEC_CPU_LP64 Base Optimization Flags ----------------------- C benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 C++ benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 Fortran benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch Benchmarks using both Fortran and C: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 Peak Compiler Invocation ------------------------ C benchmarks: icc -m64 C++ benchmarks (except as noted below): icpc -m64 450.soplex: icpc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Peak Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 482.sphinx3: -DSPEC_CPU_LP64 Peak Optimization Flags ----------------------- C benchmarks: 433.milc: basepeak = yes 470.lbm: basepeak = yes 482.sphinx3: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-mem-layout-trans=3 -unroll2 C++ benchmarks: 444.namd: -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -fno-alias -auto-ilp32 447.dealII: basepeak = yes 450.soplex: -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -opt-malloc-options=3 453.povray: -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -unroll4 -ansi-alias Fortran benchmarks: 410.bwaves: basepeak = yes 416.gamess: -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -inline-level=0 -scalar-rep- 434.zeusmp: basepeak = yes 437.leslie3d: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch 459.GemsFDTD: basepeak = yes 465.tonto: -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto -inline-calloc -opt-malloc-options=3 Benchmarks using both Fortran and C: 435.gromacs: -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 436.cactusADM: basepeak = yes 454.calculix: basepeak = yes 481.wrf: -xCORE-AVX2 -ipo -O3 -no-prec-div -auto-ilp32 The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2006/flags/Intel-ic15.0-official-linux64.html http://www.spec.org/cpu2006/flags/Dell-Platform-Settings-V1.2-revE.20150421.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2006/flags/Intel-ic15.0-official-linux64.xml http://www.spec.org/cpu2006/flags/Dell-Platform-Settings-V1.2-revE.20150421.xml SPEC and SPECfp are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2006-2015 Standard Performance Evaluation Corporation Tested with SPEC CPU2006 v1.2. Report generated on Wed Jun 17 10:49:25 2015 by CPU2006 ASCII formatter v6932. Originally published on 16 June 2015.