| CPU2006 license: | 19 | Test date: | Dec-2014 |
|---|---|---|---|
| Test sponsor: | Fujitsu | Hardware Availability: | Sep-2014 |
| Tested by: | Fujitsu | Software Availability: | Sep-2014 |
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon E5-2637 v3 |
| CPU Characteristics: | Intel Turbo Boost Technology up to 3.70 GHz |
| CPU MHz: | 3500 |
| FPU: | Integrated |
| CPU(s) enabled: | 8 cores, 2 chips, 4 cores/chip, 2 threads/core |
| CPU(s) orderable: | 1,2 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| L3 Cache: | 15 MB I+D on chip per chip |
| Other Cache: | None |
| Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) |
| Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
| Other Hardware: | None |
| Software | |
|---|---|
| Operating System: | Red Hat Enterprise Linux Server release 7.0 (Maipo) Kernel 3.10.0-123.8.1.el7.x86_64 |
| Compiler: | C/C++: Version 15.0.0.090 of Intel C++ Studio XE for Linux; Fortran: Version 15.0.0.090 of Intel Fortran Studio XE for Linux |
| Auto Parallel: | No |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 32/64-bit |
| Peak Pointers: | 32/64-bit |
| Other Software: | None |
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 410.bwaves | 16 | 447 | 486 | 446 | 488 | 447 | 487 | 16 | 447 | 486 | 446 | 488 | 447 | 487 |
| 416.gamess | 16 | 834 | 376 | 837 | 374 | 836 | 375 | 16 | 796 | 394 | 799 | 392 | 797 | 393 |
| 433.milc | 16 | 298 | 493 | 298 | 493 | 298 | 492 | 16 | 298 | 492 | 298 | 494 | 298 | 493 |
| 434.zeusmp | 16 | 306 | 476 | 306 | 476 | 306 | 476 | 16 | 306 | 476 | 306 | 476 | 306 | 476 |
| 435.gromacs | 16 | 262 | 436 | 261 | 438 | 261 | 438 | 16 | 256 | 447 | 256 | 446 | 256 | 446 |
| 436.cactusADM | 16 | 381 | 502 | 383 | 499 | 387 | 494 | 16 | 381 | 502 | 383 | 499 | 387 | 494 |
| 437.leslie3d | 16 | 512 | 293 | 515 | 292 | 513 | 293 | 8 | 196 | 383 | 197 | 381 | 197 | 381 |
| 444.namd | 16 | 421 | 305 | 419 | 306 | 420 | 306 | 16 | 413 | 311 | 412 | 311 | 410 | 313 |
| 447.dealII | 16 | 303 | 604 | 303 | 604 | 303 | 604 | 16 | 303 | 604 | 303 | 604 | 303 | 604 |
| 450.soplex | 16 | 449 | 297 | 450 | 296 | 451 | 296 | 16 | 449 | 297 | 450 | 296 | 451 | 296 |
| 453.povray | 16 | 166 | 513 | 166 | 511 | 167 | 509 | 16 | 149 | 572 | 147 | 578 | 147 | 579 |
| 454.calculix | 16 | 230 | 573 | 232 | 568 | 231 | 570 | 16 | 230 | 573 | 232 | 568 | 231 | 570 |
| 459.GemsFDTD | 16 | 626 | 271 | 630 | 270 | 630 | 269 | 16 | 626 | 271 | 630 | 270 | 630 | 269 |
| 465.tonto | 16 | 364 | 432 | 366 | 430 | 375 | 420 | 16 | 339 | 464 | 342 | 461 | 342 | 461 |
| 470.lbm | 16 | 438 | 502 | 438 | 502 | 438 | 501 | 16 | 438 | 502 | 438 | 502 | 438 | 501 |
| 481.wrf | 16 | 333 | 537 | 331 | 540 | 333 | 536 | 16 | 326 | 548 | 331 | 540 | 326 | 548 |
| 482.sphinx3 | 16 | 827 | 377 | 822 | 379 | 826 | 377 | 16 | 827 | 377 | 822 | 379 | 826 | 377 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration:
Energy Performance = Performance
Utilization Profile = Unbalanced
QPI snoop mode: Early Snoop
COD Enable = Disabled, Early Snoop = Enabled
CPU C1E Support = Disabled
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/SPECcpu2006/libs/32:/home/SPECcpu2006/libs/64:/home/SPECcpu2006/sh" Binaries compiled on a system with 1x Core i5-4670K CPU + 16GB memory using RedHat EL 7.0 Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> This result was measured on the PRIMERGY CX2550 M1. The PRIMERGY CX2550 M1 and the PRIMERGY CX2570 M1 are electronically equivalent. For information about Fujitsu please visit: http://www.fujitsu.com
| icc -m64 |
| icpc -m64 |
| ifort -m64 |
| icc -m64 ifort -m64 |
| 410.bwaves: | -DSPEC_CPU_LP64 |
| 416.gamess: | -DSPEC_CPU_LP64 |
| 433.milc: | -DSPEC_CPU_LP64 |
| 434.zeusmp: | -DSPEC_CPU_LP64 |
| 435.gromacs: | -DSPEC_CPU_LP64 -nofor_main |
| 436.cactusADM: | -DSPEC_CPU_LP64 -nofor_main |
| 437.leslie3d: | -DSPEC_CPU_LP64 |
| 444.namd: | -DSPEC_CPU_LP64 |
| 447.dealII: | -DSPEC_CPU_LP64 |
| 450.soplex: | -DSPEC_CPU_LP64 |
| 453.povray: | -DSPEC_CPU_LP64 |
| 454.calculix: | -DSPEC_CPU_LP64 -nofor_main |
| 459.GemsFDTD: | -DSPEC_CPU_LP64 |
| 465.tonto: | -DSPEC_CPU_LP64 |
| 470.lbm: | -DSPEC_CPU_LP64 |
| 481.wrf: | -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX |
| 482.sphinx3: | -DSPEC_CPU_LP64 |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias |
| icc -m64 |
| icpc -m64 |
| ifort -m64 |
| icc -m64 ifort -m64 |
Same as Base Portability Flags
| 433.milc: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
| 470.lbm: | basepeak = yes |
| 482.sphinx3: | basepeak = yes |
| 444.namd: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -fno-alias -auto-ilp32 |
| 447.dealII: | basepeak = yes |
| 450.soplex: | basepeak = yes |
| 453.povray: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -ansi-alias |
| 410.bwaves: | basepeak = yes |
| 416.gamess: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -inline-level=0 -scalar-rep- |
| 434.zeusmp: | basepeak = yes |
| 437.leslie3d: | -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch |
| 459.GemsFDTD: | basepeak = yes |
| 465.tonto: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto -inline-calloc -opt-malloc-options=3 |
| 435.gromacs: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 |
| 436.cactusADM: | basepeak = yes |
| 454.calculix: | basepeak = yes |
| 481.wrf: | -xCORE-AVX2 -ipo -O3 -no-prec-div -auto-ilp32 |