| CPU2006 license: | 19 | Test date: | Nov-2014 |
|---|---|---|---|
| Test sponsor: | Fujitsu | Hardware Availability: | Sep-2014 |
| Tested by: | Fujitsu | Software Availability: | Sep-2014 |
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon E5-2620 v3 |
| CPU Characteristics: | Intel Turbo Boost Technology up to 3.20 GHz |
| CPU MHz: | 2400 |
| FPU: | Integrated |
| CPU(s) enabled: | 12 cores, 2 chips, 6 cores/chip, 2 threads/core |
| CPU(s) orderable: | 1,2 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| L3 Cache: | 15 MB I+D on chip per chip |
| Other Cache: | None |
| Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R, running at 1866 MHz) |
| Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
| Other Hardware: | None |
| Software | |
|---|---|
| Operating System: | Red Hat Enterprise Linux Server release 7.0 (Maipo) Kernel 3.10.0-123.8.1.el7.x86_64 |
| Compiler: | C/C++: Version 15.0.0.090 of Intel C++ Studio XE for Linux; Fortran: Version 15.0.0.090 of Intel Fortran Studio XE for Linux |
| Auto Parallel: | No |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 32/64-bit |
| Peak Pointers: | 32/64-bit |
| Other Software: | None |
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 410.bwaves | 24 | 713 | 457 | 713 | 458 | 711 | 459 | 24 | 713 | 457 | 713 | 458 | 711 | 459 |
| 416.gamess | 24 | 1119 | 420 | 1124 | 418 | 1122 | 419 | 24 | 1069 | 440 | 1071 | 439 | 1074 | 438 |
| 433.milc | 24 | 485 | 455 | 484 | 455 | 485 | 454 | 24 | 484 | 455 | 484 | 455 | 485 | 455 |
| 434.zeusmp | 24 | 410 | 533 | 410 | 532 | 410 | 533 | 24 | 410 | 533 | 410 | 532 | 410 | 533 |
| 435.gromacs | 24 | 351 | 488 | 351 | 488 | 347 | 494 | 24 | 343 | 500 | 343 | 500 | 343 | 499 |
| 436.cactusADM | 24 | 477 | 601 | 478 | 600 | 476 | 602 | 24 | 477 | 601 | 478 | 600 | 476 | 602 |
| 437.leslie3d | 24 | 714 | 316 | 711 | 317 | 713 | 317 | 12 | 319 | 354 | 319 | 353 | 319 | 354 |
| 444.namd | 24 | 577 | 333 | 578 | 333 | 578 | 333 | 24 | 567 | 340 | 571 | 337 | 568 | 339 |
| 447.dealII | 24 | 417 | 659 | 420 | 654 | 418 | 656 | 24 | 417 | 659 | 420 | 654 | 418 | 656 |
| 450.soplex | 24 | 655 | 305 | 655 | 306 | 654 | 306 | 24 | 655 | 305 | 655 | 306 | 654 | 306 |
| 453.povray | 24 | 221 | 577 | 221 | 577 | 221 | 578 | 24 | 197 | 647 | 196 | 651 | 196 | 652 |
| 454.calculix | 24 | 300 | 661 | 301 | 658 | 304 | 652 | 24 | 300 | 661 | 301 | 658 | 304 | 652 |
| 459.GemsFDTD | 24 | 834 | 305 | 833 | 306 | 833 | 306 | 24 | 834 | 305 | 833 | 306 | 833 | 306 |
| 465.tonto | 24 | 506 | 467 | 504 | 469 | 504 | 468 | 24 | 470 | 502 | 470 | 502 | 471 | 501 |
| 470.lbm | 24 | 556 | 593 | 557 | 592 | 558 | 591 | 24 | 556 | 593 | 557 | 592 | 558 | 591 |
| 481.wrf | 24 | 503 | 533 | 501 | 535 | 495 | 542 | 24 | 498 | 538 | 504 | 532 | 501 | 535 |
| 482.sphinx3 | 24 | 1090 | 429 | 1088 | 430 | 1089 | 429 | 24 | 1090 | 429 | 1088 | 430 | 1089 | 429 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration:
Energy Performance = Performance
Utilization Profile = Unbalanced
QPI snoop mode: Home Snoop
COD Enable = Disabled, Early Snoop = Disabled
CPU C1E Support = Disabled
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/SPECcpu2006/libs/32:/home/SPECcpu2006/libs/64:/home/SPECcpu2006/sh" Binaries compiled on a system with 1x Core i5-4670K CPU + 16GB memory using RedHat EL 7.0 Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> This result was measured on the PRIMERGY CX2550 M1. The PRIMERGY CX2550 M1 and the PRIMERGY CX2570 M1 are electronically equivalent. For information about Fujitsu please visit: http://www.fujitsu.com
| icc -m64 |
| icpc -m64 |
| ifort -m64 |
| icc -m64 ifort -m64 |
| 410.bwaves: | -DSPEC_CPU_LP64 |
| 416.gamess: | -DSPEC_CPU_LP64 |
| 433.milc: | -DSPEC_CPU_LP64 |
| 434.zeusmp: | -DSPEC_CPU_LP64 |
| 435.gromacs: | -DSPEC_CPU_LP64 -nofor_main |
| 436.cactusADM: | -DSPEC_CPU_LP64 -nofor_main |
| 437.leslie3d: | -DSPEC_CPU_LP64 |
| 444.namd: | -DSPEC_CPU_LP64 |
| 447.dealII: | -DSPEC_CPU_LP64 |
| 450.soplex: | -DSPEC_CPU_LP64 |
| 453.povray: | -DSPEC_CPU_LP64 |
| 454.calculix: | -DSPEC_CPU_LP64 -nofor_main |
| 459.GemsFDTD: | -DSPEC_CPU_LP64 |
| 465.tonto: | -DSPEC_CPU_LP64 |
| 470.lbm: | -DSPEC_CPU_LP64 |
| 481.wrf: | -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX |
| 482.sphinx3: | -DSPEC_CPU_LP64 |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch |
| -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias |
| icc -m64 |
| icpc -m64 |
| ifort -m64 |
| icc -m64 ifort -m64 |
Same as Base Portability Flags
| 433.milc: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
| 470.lbm: | basepeak = yes |
| 482.sphinx3: | basepeak = yes |
| 444.namd: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -fno-alias -auto-ilp32 |
| 447.dealII: | basepeak = yes |
| 450.soplex: | basepeak = yes |
| 453.povray: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -ansi-alias |
| 410.bwaves: | basepeak = yes |
| 416.gamess: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -inline-level=0 -scalar-rep- |
| 434.zeusmp: | basepeak = yes |
| 437.leslie3d: | -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch |
| 459.GemsFDTD: | basepeak = yes |
| 465.tonto: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto -inline-calloc -opt-malloc-options=3 |
| 435.gromacs: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 |
| 436.cactusADM: | basepeak = yes |
| 454.calculix: | basepeak = yes |
| 481.wrf: | -xCORE-AVX2 -ipo -O3 -no-prec-div -auto-ilp32 |