CPU2006 license: | 19 | Test date: | Nov-2014 |
---|---|---|---|
Test sponsor: | Fujitsu | Hardware Availability: | Sep-2014 |
Tested by: | Fujitsu | Software Availability: | Nov-2013 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2690 v3 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.50 GHz |
CPU MHz: | 2600 |
FPU: | Integrated |
CPU(s) enabled: | 24 cores, 2 chips, 12 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 30 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) |
Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.5 (Santiago) 2.6.32-431.23.3.el6.x86_64 |
Compiler: | C/C++: Version 14.0.0.080 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 48 | 543 | 863 | 543 | 864 | 541 | 867 | 48 | 446 | 1050 | 444 | 1060 | 449 | 1040 |
401.bzip2 | 48 | 850 | 545 | 852 | 544 | 851 | 544 | 48 | 816 | 568 | 817 | 567 | 816 | 568 |
403.gcc | 48 | 472 | 819 | 475 | 814 | 474 | 816 | 48 | 477 | 810 | 474 | 816 | 471 | 821 |
429.mcf | 48 | 305 | 1440 | 304 | 1440 | 305 | 1440 | 48 | 305 | 1440 | 304 | 1440 | 305 | 1440 |
445.gobmk | 48 | 674 | 747 | 675 | 746 | 676 | 745 | 48 | 658 | 766 | 658 | 765 | 657 | 766 |
456.hmmer | 48 | 295 | 1520 | 299 | 1500 | 295 | 1520 | 48 | 293 | 1530 | 294 | 1520 | 293 | 1530 |
458.sjeng | 48 | 715 | 812 | 716 | 812 | 716 | 811 | 48 | 691 | 840 | 692 | 840 | 692 | 839 |
462.libquantum | 48 | 99.3 | 10000 | 99.1 | 10000 | 99.8 | 9970 | 48 | 99.3 | 10000 | 99.1 | 10000 | 99.8 | 9970 |
464.h264ref | 48 | 819 | 1300 | 803 | 1320 | 830 | 1280 | 48 | 788 | 1350 | 817 | 1300 | 813 | 1310 |
471.omnetpp | 48 | 524 | 573 | 526 | 571 | 526 | 570 | 48 | 502 | 597 | 503 | 597 | 510 | 588 |
473.astar | 48 | 580 | 581 | 576 | 585 | 576 | 585 | 48 | 580 | 581 | 576 | 585 | 576 | 585 |
483.xalancbmk | 48 | 294 | 1130 | 294 | 1130 | 292 | 1130 | 48 | 294 | 1130 | 294 | 1130 | 292 | 1130 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration: Energy Performance = Performance QPI snoop mode: Cluster on Die COD Enable = Enabled, Early Snoop = Disabled CPU C1E Support = Disabled
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64:/SPECcpu2006/sh" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RedHat EL 6.4 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> For information about Fujitsu please visit: http://www.fujitsu.com
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | -xCORE-AVX2 -ipo -O3 -no-prec-div |
429.mcf: | basepeak = yes |
445.gobmk: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xCORE-AVX2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |