CPU2006 license: | 3 | Test date: | Apr-2014 |
---|---|---|---|
Test sponsor: | Hewlett-Packard Company | Hardware Availability: | Feb-2014 |
Tested by: | Hewlett-Packard Company | Software Availability: | Nov-2013 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E7-8891 v2 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.70 GHz |
CPU MHz: | 3200 |
FPU: | Integrated |
CPU(s) enabled: | 40 cores, 4 chips, 10 cores/chip, 2 threads/core |
CPU(s) orderable: | 2,4 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 37.5 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 1 TB (64 x 16 GB 2Rx4 PC3-14900R-13, ECC, running at 1333 MHz and CL9) |
Disk Subsystem: | 1 x 400 GB SSD SAS, RAID 0 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.5, (Santiago) Kernel 2.6.32-431.el6.x86_64 |
Compiler: | C/C++: Version 14.0.0.080 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 80 | 586 | 1330 | 587 | 1330 | 585 | 1340 | 80 | 502 | 1560 | 501 | 1560 | 498 | 1570 |
401.bzip2 | 80 | 810 | 953 | 811 | 951 | 810 | 953 | 80 | 792 | 975 | 794 | 972 | 792 | 975 |
403.gcc | 80 | 486 | 1330 | 489 | 1320 | 488 | 1320 | 80 | 489 | 1320 | 487 | 1320 | 487 | 1320 |
429.mcf | 80 | 307 | 2380 | 306 | 2380 | 307 | 2370 | 80 | 307 | 2380 | 306 | 2380 | 307 | 2370 |
445.gobmk | 80 | 631 | 1330 | 631 | 1330 | 632 | 1330 | 80 | 615 | 1360 | 615 | 1360 | 616 | 1360 |
456.hmmer | 80 | 293 | 2550 | 294 | 2540 | 295 | 2530 | 80 | 269 | 2770 | 269 | 2780 | 269 | 2770 |
458.sjeng | 80 | 753 | 1290 | 753 | 1290 | 754 | 1280 | 80 | 714 | 1360 | 717 | 1350 | 715 | 1350 |
462.libquantum | 80 | 138 | 12000 | 139 | 12000 | 139 | 12000 | 80 | 138 | 12000 | 139 | 12000 | 139 | 12000 |
464.h264ref | 80 | 771 | 2300 | 740 | 2390 | 738 | 2400 | 80 | 771 | 2300 | 740 | 2390 | 738 | 2400 |
471.omnetpp | 80 | 605 | 826 | 605 | 826 | 605 | 826 | 80 | 569 | 878 | 569 | 879 | 569 | 879 |
473.astar | 80 | 561 | 1000 | 561 | 1000 | 562 | 999 | 80 | 561 | 1000 | 561 | 1000 | 562 | 999 |
483.xalancbmk | 80 | 291 | 1900 | 288 | 1920 | 288 | 1910 | 80 | 291 | 1900 | 288 | 1920 | 288 | 1910 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited" Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled Filesystem page cache cleared with: echo 1 > /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> Disabled unused Linux services through "stop_services.sh" before running.
BIOS Configuration: HP Power Profile set to Maximum Performance Collaborative Power Control set to Disabled Thermal Configuration set to Maximum Cooling Processor Power and Utilization Monitoring set to Disabled Memory Refresh Rate set to Disabled Sysinfo program /cpu2006/config/sysinfo.rev6818 $Rev: 6818 $ $Date:: 2012-07-17 #$ e86d102572650a6e4d596a3cee98f191 running on DL580-Gen8-SR Mon Apr 21 15:53:13 2014 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E7-8891 v2 @ 3.20GHz 4 "physical id"s (chips) 80 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 10 siblings : 20 physical 0: cores 2 3 4 5 6 7 8 10 11 12 physical 1: cores 2 3 4 5 6 7 8 10 11 12 physical 2: cores 2 3 4 5 6 7 8 10 11 12 physical 3: cores 2 3 4 5 6 7 8 10 11 12 cache size : 38400 KB From /proc/meminfo MemTotal: 1058653984 kB HugePages_Total: 0 Hugepagesize: 2048 kB /usr/bin/lsb_release -d Red Hat Enterprise Linux Server release 6.5 (Santiago) From /etc/*release* /etc/*version* redhat-release: Red Hat Enterprise Linux Server release 6.5 (Santiago) system-release: Red Hat Enterprise Linux Server release 6.5 (Santiago) system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server uname -a: Linux DL580-Gen8-SR 2.6.32-431.el6.x86_64 #1 SMP Sun Nov 10 22:19:54 EST 2013 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Apr 21 15:48 SPEC is set to: /cpu2006 Filesystem Type Size Used Avail Use% Mounted on /dev/sda3 ext4 365G 13G 334G 4% / Additional information from dmidecode: BIOS HP P79 02/21/2014 Memory: 64x HP 712383-081 16 GB 1333 MHz 2 rank 32x UNKNOWN NOT AVAILABLE (End of data from sysinfo program) Regarding the sysinfo display about the memory installed, the correct amount of memory is 1 TB and the dmidecode description should have one line reading as: 64x HP 712383-081 16 GB 1333 MHz 2 rank
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/cpu2006/libs/32:/cpu2006/libs/64:/cpu2006/sh" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RedHat EL 6.4
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | -xSSE4.2 -ipo -O3 -no-prec-div |
429.mcf: | basepeak = yes |
445.gobmk: | -xSSE4.2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xSSE4.2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | basepeak = yes |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |