# Invocation command line: # /root/cpu2006-1.2/bin/runspec --define external --rate 12 -c cpu2006.1.2.ic14.0.linux64.ws.sse42.rate.15aug2013 --define smt --define cores=6 --define physicalfirst --define invoke_with_interleave --define drop_caches --define THP_enabled -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 13.1 # Operating system version: 64-Bit RedHat Enterprise Linux64 6.4 # Hardware: Intel processors supporting SSE4.2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Aug 2012 IC 13 Linux64 ############################################################################ action = validate tune = base,peak %define version 15aug2013 ext = cpu2006.1.2.ic14.0.linux64.ws.sse42.rate.%{version} ##################################################################################### # You can't change the line with fail_build=1 without changing the line ext= # to reflect the data on which you re-built the binaries. # In addition, the sw_compiler lines below, must be modified to match the description # of the compiler being used to build the binaries ##################################################################################### fail_build=1 PATHSEP = / check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6818 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic14.0-official-linux64.20140128.xml %ifdef %{external} flagsurl001=http://www.spec.org/cpu2006/flags/Dell-Platform-Settings-V1.2-revB.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 CXX= icpc -m32 OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xSSE4.2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch COPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -auto-ilp32 -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: OPTIMIZE= 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: OPTIMIZE= $(FAST) -opt-prefetch feedback=no #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = CXX= icpc -m32 OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} %ifdef %{physicallogical} submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif %endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: OPTIMIZE= $(FAST) feedback=0 482.sphinx3=peak=default: PORTABILITY= CC= icc -m32 OPTIMIZE= $(FASTNOSTATIC) -opt-mem-layout-trans=3 COPTIMIZE= -unroll2 feedback=no ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 55 test_sponsor = Dell Inc. hw_avail = Jan-2014 sw_avail = Sep-2013 tester = Dell Inc. hw_cpu_name = Intel Xeon E5-2430L v2 hw_cpu_char = Intel Turbo Boost Technology up to 2.80 GHz hw_cpu_mhz = 2400 hw_disk = 300 GB SAS, 15 K RPM hw_fpu = Integrated hw_memory000 = 96 GB (6 x 16 GB 2Rx4 PC3L-12800R-11, ECC) hw_model = PowerEdge R320 (Intel Xeon E5-2430L v2, 2.40 GHz) hw_ncpuorder = 1,2 chip hw_ncores = 6 hw_nchips = 1 hw_ncoresperchip = 6 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 15 MB I+D on chip per chip hw_ocache = None hw_vendor = Dell Inc. prepared_by = Anirudha Rahatekar sw_file = ext2 sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.76-0.11-default sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_015 = Binaries compiled on a system with 1x Core i7-860 CPU + 8GB notes_020 = memory using RedHat EL 6.4 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler000 = C/C++: Version 14.0.0.080 of Intel C++ Studio XE sw_compiler001 = for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.0 default: %ifdef %{THP_enabled} notes_025 = Transparent Huge Pages enabled with: notes_030 = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_035 = Filesystem page cache cleared with: notes_040 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_045 = runspec command invoked through numactl i.e.: notes_050 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 14.0.0.080 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 14.0.0.080 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6818' default: notes_plat_sysinfo_000 = Sysinfo program /root/cpu2006-1.2/config/sysinfo.rev6818 notes_plat_sysinfo_005 = $Rev: 6818 $ $Date:: 2012-07-17 #$ e86d102572650a6e4d596a3cee98f191 notes_plat_sysinfo_010 = running on linux Fri Oct 11 09:04:18 2013 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2430L v2 @ 2.40GHz notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 12 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 6 notes_plat_sysinfo_080 = siblings : 12 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_090 = cache size : 15360 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 99123704 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = /usr/bin/lsb_release -d notes_plat_sysinfo_130 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = SuSE-release: notes_plat_sysinfo_150 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_155 = VERSION = 11 notes_plat_sysinfo_160 = PATCHLEVEL = 3 notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = uname -a: notes_plat_sysinfo_175 = Linux linux 3.0.76-0.11-default #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990) notes_plat_sysinfo_180 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = run-level 3 Oct 11 08:47 last=S notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /root/cpu2006-1.2 notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_210 = /dev/sda2 ext2 267G 7.7G 258G 3% / notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = Additional information from dmidecode: notes_plat_sysinfo_225 = BIOS Dell Inc. 2.0.21 09/23/2013 notes_plat_sysinfo_230 = Memory: notes_plat_sysinfo_235 = 6x 00CE00B300CE M393B2G70BH0-YK0 16 GB 1600 MHz notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2430L v2 hw_disk = 1 x 300 GB 15000 RPM SAS hw_nchips = 1 prepared_by = Dell Inc. sw_file = ext2 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) sw_os001 = 3.0.76-0.11-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 464.h264ref: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 403.gcc: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =LD_LIBRARY_PATH = "/root/cpu2006-1.2/libs/32:/root/cpu2006-1.2/libs/64:/root/cpu2006-1.2/sh" notes_010 = notes_plat_form_000 = BIOS settings: notes_plat_form_005 = Virtualization Technology disabled notes_plat_form_010 = Execute Disable disabled notes_plat_form_015 = Logical Processor enabled notes_plat_form_020 = System Profile set to Performance