# Invocation command line: # C:\cpu2006.v1.2\bin\runspec -c dell.cpu2006.v1.2.ic12.1.0.233.AVX.SPD.win64.cfg -T all fp # output_root was not used for this run ############################################################################ ####################################################################### # Dell Inc. # # CPU2006 - Windows (64-bit) Config file for Intel Processors # Sandy Bridge # # Intel C++/FORTRAN Compiler 12.0 ################################################################################ #action = validate #tune = base %define ICL_VER 12.1.0.233 %define ICL_TXT ic%{ICL_VER} ext = v1.2.%{ICL_TXT}.AVX.SPD.win64.exe sysinfo_program = specperl $[top]/Docs/sysinfo -f PATHSEP = / check_md5 = 1 reportable = 1 backup_config = 0 output_format = asc,html flagsurl000 = http://www.spec.org/cpu2006/flags/Dell-ic12.1-Windows.xml mean_anyway = 1 #include: dell.SUT.inc # ----- Begin inclusion of 'dell.SUT.inc' ############################################################################ ############################################################################ # Include for SUT (System Under Test) Description ############################################################################ # -------------------------- # Edit fields as necessary # -------------------------- default: hw_cpu_name = Intel Xeon E5-2687W hw_cpu_char = Intel Turbo Boost Technology up to 3.80 GHz hw_cpu_mhz = 3100 hw_disk = 1 x 250 GB SATAIII 7200 RPM hw_fpu = Integrated hw_memory = 64 GB (8 x 8 GB 2Rx4 PC3-12800R-9, ECC) hw_model000 = DELL Precision T7600 (Intel Xeon E5-2687W, hw_model001 = 3.10GHz) #hw_ncpuorder = 1 chip hw_ncpuorder = 1,2 chips hw_ncores = 16 hw_nthreadspercore = 2 hw_nchips = 2 hw_ncoresperchip = 8 hw_ocache = None hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip sw_file = NTFS sw_os = Windows 7 Professional (64-bit) sw_state = Default hw_avail = Aug-2012 # # This section only needed for non-default BIOS settings # #notes_plat_010 = BIOS Settings #notes_plat_011 = Memory Node Interleaving: NUMA/SMP #notes_plat_012 = Hyper-Threading: ENABLE/DISABLE #notes_plat_013 = Turbo Boost: ENABLE/DISABLE #notes_plat_014 = Adjacent Cache Line Prefetch: ENABLE/DISABLE #notes_plat_015 = Hardware Prefetch: ENABLE/DISABLE #notes_plat_016 = #--------------------DO NOT EDIT BELOW THIS LINE----------------------------------- license_num = 55 hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. # ---- End inclusion of 'C:/cpu2006.v1.2/config/dell.SUT.inc' #include: omp.inc # ----- Begin inclusion of 'omp.inc' ############################################################################ # # Auto Parallel(if applicable) # default: notes_os_000 = OMP_NUM_THREADS=16 (number of cores) notes_os_005 = KMP_AFFINITY=granularity=fine,scatter # ---- End inclusion of 'C:/cpu2006.v1.2/config/omp.inc' fast_opt = -QxAVX bit_opt = -Qauto-ilp32 ############################################## # Dell Inc. # Optimizations - Windows 64-bit /SPEED ############################################## sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sh_lib = shlw64m.lib all_c,all_cpp=default: EXTRA_LDFLAGS = /F512000000 all_fortran,all_mixed=default: EXTRA_LDFLAGS = /F1000000000 # Portability #include: %{ICL_TXT}\port.win64.inc # ----- Begin inclusion of 'ic12.1.0.233\port.win64.inc' ############################################################################ ################################################################### # Dell Inc. # CPU2006 - Include for Portability Flags & Compiler Description # Windows (64-bit) # # Intel C++/FORTRAN Compiler 12.0 # ################################################################### # ==================================== # Portability # ==================================== default: PORTABILITY = -DSPEC_CPU_P64 400.perlbench=default=default=default: CPORTABILITY = -DSPEC_CPU_NO_NEED_VA_COPY -DSPEC_CPU_WIN64_X64 403.gcc=default=default=default: CPORTABILITY = -DSPEC_CPU_WIN64 EXTRA_CFLAGS = -Dalloca=_alloca 410.bwaves: FPORTABILITY = -names:lowercase 436.cactusADM=default=default=default: FPORTABILITY = -names:lowercase /assume:underscore 444.namd=default=default=default: CXXPORTABILITY = /TP 447.dealII=default: CXXPORTABILITY = -DDEAL_II_MEMBER_VAR_SPECIALIZATION_BUG 453.povray=default=default=default: CXXPORTABILITY = -DSPEC_CPU_NEED_INVHYP -DNEED_INVHYP 454.calculix=default=default=default: FPORTABILITY = -names:lowercase CPORTABILITY = -DSPEC_CPU_NOZMODIFIER 464.h264ref=default=default=default: CPORTABILITY = -DSPEC_CPU_NO_INTTYPES -DWIN32 471.omnetpp=default: CXXPORTABILITY = -DSPEC_CPU_WIN64 481.wrf=default: CPORTABILITY = -DSPEC_CPU_WINDOWS_ICL 483.xalancbmk=default=default=default: CXXPORTABILITY = -Qoption,cpp,--no_wchar_t_keyword # ================================== # Compiler description/information # ================================== # ================================== # Compiler description/information # ================================== default: sw_compiler000 = C/C++: Version 12.1.0.233 of Intel C++ Studio XE sw_compiler001 = for Windows fp: sw_compiler002 = Fortran: Version 12.1.0.233 of Intel Visual sw_compiler003 = Fortran Compiler for Intel64 default: sw_compiler004 = C/C++: Version 2010 of Microsoft Visual Studio sw_other = MicroQuill SmartHeap Library 10.0 sw_avail = Aug-2011 notes_000= Binaries were built on Windows 7 Professional (64-bit) notes_005 = notes_010 =Submitted_by: notes_015 =Submitted: Mon Feb 11 17:38:59 EST 2013 notes_020 =Submission: cpu2006-20130211-25516.sub # ---- End inclusion of 'C:/cpu2006.v1.2/config/ic12.1.0.233/port.win64.inc' # Optimize #include: %{ICL_TXT}\opts.AVX.SPD.windows.inc # ----- Begin inclusion of 'ic12.1.0.233\opts.AVX.SPD.windows.inc' ############################################################################ ############################################## # Dell Inc. # SPEED Optimizations for Windows ############################################## ################################################################ # Compiler Setup ################################################################ default: CC = icl -Qvc10 -Qstd=c99 CXX = icl -Qvc10 FC = ifort OBJ = .obj # ================================================ # Library Tuning Flags # ================================================ all_cpp=default: EXTRA_LIBS = ${sh_lib} LDOUT = -Fe$@ -link /FORCE:MULTIPLE # ================================================ # Baseline Tuning Flags # ================================================ int=base: OPTIMIZE = $[fast_opt] -Qipo -O3 -Qprec-div- -Qopt-prefetch COPTIMIZE = -Qparallel $[bit_opt] CXXOPTIMIZE = -Qcxx-features $[bit_opt] fp=base: OPTIMIZE = $[fast_opt] -Qipo -O3 -Qprec-div- -Qparallel -Qansi-alias -Qopt-prefetch COPTIMIZE = $[bit_opt] CXXOPTIMIZE = -Qcxx-features $[bit_opt] # ================================================ # Peak Tuning Flags # ================================================ default=peak: COPTIMIZE = $[bit_opt] CXXOPTIMIZE = $[bit_opt] PASS1_CFLAGS= -Qprof_gen PASS2_CFLAGS= $[fast_opt] -Qprof_use PASS1_CXXFLAGS= -Qprof_gen PASS2_CXXFLAGS= $[fast_opt] -Qprof_use PASS1_FFLAGS= -Qprof_gen PASS2_FFLAGS= $[fast_opt] -Qprof_use PASS1_LDFLAGS= -Qprof_gen PASS2_LDFLAGS= $[fast_opt] -Qprof_use # ================================================ # Peak Tuning Flags int 2006 fast # ================================================ int=peak: OPTIMIZE = -Qipo -O3 -Qprec-div- 400.perlbench=peak=default: OPTIMIZE = $[fast_opt] -Qipo -O3 -Qprec-div- -Qansi-alias -Qopt-prefetch EXTRA_LIBS = ${sh_lib} LDOUT = -Fe$@ -link /FORCE:MULTIPLE 401.bzip2=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qopt-prefetch -Qansi-alias 429.mcf=peak=default: OPTIMIZE= $[fast_opt] -Qipo -O3 -Qprec-div- -Qopt-prefetch feedback=no 445.gobmk=peak=default: OPTIMIZE= -Qipo -O2 -Qprec-div- -Qansi-alias 456.hmmer=peak=default: OPTIMIZE= $[fast_opt] -Qipo -O3 -Qprec-div- -Qunroll2 -Qansi-alias feedback=no 458.sjeng=peak=default: basepeak=yes 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qunroll2 -Qansi-alias 471.omnetpp=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qansi-alias -Qopt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes # ================================================ # Peak Tuning Flags fp 2006 fast # ================================================ fp=peak: OPTIMIZE= $[fast_opt] -Qipo -O3 -Qprec-div- 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qunroll2 -Ob0 -Qansi-alias -Qscalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qopt-prefetch -Qparallel -Qunroll2 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Oa 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qunroll4 -Qansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qunroll2 -Qopt-prefetch -Qparallel 465.tonto=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qunroll4 -Qauto -Qinline-calloc 470.lbm=peak=default: OPTIMIZE= -Qipo -O3 -Qprec-div- -Qansi-alias -Qparallel 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes # ---- End inclusion of 'C:/cpu2006.v1.2/config/ic12.1.0.233/opts.AVX.SPD.windows.inc' #------DO NOT EDIT BELOW ------------------------ # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo -f' default: notes_plat_sysinfo_000 = Sysinfo program C:\cpu2006.v1.2/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6775 $ $Date:: 2011-08-16 #$ \8787f7622badcf24e01c368b1db4377c notes_plat_sysinfo_010 = running on Spec-PC Fri Jan 18 23:58:19 2013 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = Trying 'systeminfo' notes_plat_sysinfo_045 = OS Name : Microsoft Windows 7 Professional notes_plat_sysinfo_050 = OS Version : 6.1.7601 Service Pack 1 Build 7601 notes_plat_sysinfo_055 = System Manufacturer: Dell Inc. notes_plat_sysinfo_060 = System Model : Precision T7600 notes_plat_sysinfo_065 = Processor(s) : 2 Processor(s) Installed. notes_plat_sysinfo_070 = [01]: Intel64 Family 6 Model 45 Stepping 6 GenuineIntel ~2294 Mhz notes_plat_sysinfo_075 = [02]: Intel64 Family 6 Model 45 Stepping 6 GenuineIntel ~3101 Mhz notes_plat_sysinfo_080 = BIOS Version : Dell Inc. A05, 11/8/2012 notes_plat_sysinfo_085 = Total Physical Memory: 65,462 MB notes_plat_sysinfo_090 = notes_plat_sysinfo_095 = Trying 'wmic cpu get /value' notes_plat_sysinfo_100 = DeviceID : CPU0 notes_plat_sysinfo_105 = L2CacheSize : 2048 notes_plat_sysinfo_110 = L3CacheSize : 4096 notes_plat_sysinfo_115 = MaxClockSpeed : 3101 notes_plat_sysinfo_120 = Name : Intel(R) Xeon(R) CPU E5-2687W 0 @ 3.10GHz notes_plat_sysinfo_125 = NumberOfCores : 8 notes_plat_sysinfo_130 = NumberOfLogicalProcessors: 16 notes_plat_sysinfo_135 = DeviceID : CPU1 notes_plat_sysinfo_140 = L2CacheSize : 2048 notes_plat_sysinfo_145 = L3CacheSize : 4096 notes_plat_sysinfo_150 = MaxClockSpeed : 3101 notes_plat_sysinfo_155 = Name : Intel(R) Xeon(R) CPU E5-2687W 0 @ 3.10GHz notes_plat_sysinfo_160 = NumberOfCores : 8 notes_plat_sysinfo_165 = NumberOfLogicalProcessors: 16 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = (End of data from sysinfo program) # hw_cpu_mhz = 3101 # hw_cpu_name = Intel Xeon E5-2687W 0 # hw_memory001 = 65,462 MB fixme: format is: # hw_memory002 = 'n GB (n x n GB nRxn PCn-nnnnnR-n, ECC)' # hw_model = Precision T7600 # hw_nchips = 2 # hw_ncores = 8 # hw_ncoresperchip = 4 # hw_nthreadspercore = 2 # hw_scache = 2048 KB I+D on/off chip per ____ # hw_tcache = 4096 KB I+D on/off chip per ____ # hw_vendor = Dell Inc. # prepared_by = Spec (is never output, only tags rawfile) # sw_os001 = Microsoft Windows 7 Professional # sw_os002 = 6.1.7601 Service Pack 1 Build 7601 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl001 = http://www.spec.org/cpu2006/flags/Dell-platform-Precision.xml