# Invocation command line: # /SPEC/bin/runspec --define external --rate 24 -c cpu2006.1.2.ic12.1.linux64.sse42.rate.21feb2012 --define smt --define cores=12 --define physicalfirst --define invoke_with_interleave --define drop_caches --define THP_enabled -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 12.1 # Operating system version: 64-Bit SuSe Linux Enterprise Server 11 SP2 RC3 # Hardware: Intel processors supporting SSE4.2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Aug 2011 IC 12.1 RC1 Linux64 ############################################################################ action = validate tune = base,peak %define version 21feb2012MJP ext = cpu2006.1.2.ic12.1.linux64.sse42.rate.%{version} fail_build = 1 PATHSEP = / check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6801 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20120425.xml %ifdef %{external} flagsurl001=http://www.spec.org/cpu2006/flags/HP-Platform-Flags-Intel-V1.2-A.20120829.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs3/32:$[top]/libs3/64 preENV_KMP_AFFINITY = granularity=fine,compact,1,0 # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 CXX= icpc -m32 OBJ = .o SMARTHEAP32_DIR = /spec/libs2/32 SMARTHEAP64_DIR = /spec/libs2/64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xSSE4.2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div -static ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -opt-mem-layout-trans=3 fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch COPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -auto-p32 -ansi-alias -opt-mem-layout-trans=3 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 CXXOPTIMIZE= -ansi-alias -opt-mem-layout-trans=3 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= -auto-ilp32 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -auto-ilp32 -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- -static 433.milc=peak=default: OPTIMIZE= -static 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch -static 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: OPTIMIZE= $(FAST) -opt-prefetch feedback=no 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: PORTABILITY = CXX= icpc -m32 OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: OPTIMIZE= $(FAST) feedback=0 482.sphinx3=peak=default: PORTABILITY= CC= icc -m32 OPTIMIZE= $(FASTNOSTATIC) -opt-mem-layout-trans=3 COPTIMIZE= -unroll2 feedback=no ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = Hewlett-Packard Company hw_avail = Oct-2012 sw_avail = Jun-2012 tester = Hewlett-Packard Company hw_cpu_name = Intel Xeon E5-2620 hw_cpu_char = Intel Turbo Boost Technology up to 2.50 GHz hw_cpu_mhz = 2000 hw_disk = 2 x 300 GB 15 K SAS, RAID 1 hw_fpu = Integrated hw_memory000 = 128 GB (16 x 8 GB 2Rx4 PC3-12800R-11, ECC, running hw_model000 = ProLiant ML350p Gen8 hw_model001 = (2.00 GHz, Intel Xeon E5-2620) hw_ncpuorder = 1,2 chips hw_ncores = 12 hw_nchips = 2 hw_ncoresperchip = 6 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 15 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett-Packard Company prepared_by = Hewlett-Packard Company sw_file = ext4 #sw_os001 = Suse Linux Enterprise Server Release 11 SP2 #sw_os001 = RedHat EL 6.1 #sw_os001 = RedHat EL 6.2 sw_os001 = Red Hat Enterprise Linux Version 6.3 sw_state = Run level 3 (multi-user) #sw_state = Run level 5 (X Windows multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_020 = Binaries compiled on a system with 2x Xeon E5-2667 CPU + 256GB notes_025 = memory using SLES11SP2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Transparent Huge Pages enabled with: notes_os_010 = echo always > /sys/kernel/mm/transparent_hugepage/enabled notes_os_015 = Filesystem page cache cleared with: notes_os_020 = echo 1 > /proc/sys/vm/drop_caches notes_os_025 = runspec command invoked through numactl i.e.: notes_os_030 = numactl --interleave=all runspec notes_os_035 = notes_plat_000 = BIOS Configuration: notes_plat_005 = HP Power Profile set to Custom notes_plat_010 = Thermal Configuration set to Maximum Cooling notes_plat_015 = Energy/Performance Bias set to Maximum Performance notes_plat_020 = int=default=default=default: sw_compiler000 = C/C++: Version 12.1.3.293 of Intel C++ sw_compiler001 = Studio XE for Linux sw_compiler002 = Build 20120212 sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V9.01 default: %ifdef %{THP_enabled} notes_030 = #notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: #notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled notes_201 = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{drop_caches} %endif %ifdef %{invoke_with_interleave} %endif fp=default=default=default: sw_compiler001 = C/C++: Version 12.1.3.293 Build 20120212 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 12.1.3.293 Build 20120212 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6801' default: notes_plat_sysinfo_000 = Sysinfo program /SPEC/config/sysinfo.rev6801 notes_plat_sysinfo_005 = $Rev: 6801 $ $Date:: 2012-02-29 #$ 97210b12a36633f0c6f39ef1d894b47e notes_plat_sysinfo_010 = running on mpaton350b.perflabs.hp.com Wed Oct 17 14:21:50 2012 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 24 "processors" notes_plat_sysinfo_060 = cpu cores : 6 notes_plat_sysinfo_065 = siblings : 12 notes_plat_sysinfo_070 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_075 = physical 1: cores 0 1 2 3 4 5 notes_plat_sysinfo_080 = cache size : 15360 KB notes_plat_sysinfo_085 = notes_plat_sysinfo_090 = From /proc/meminfo notes_plat_sysinfo_095 = MemTotal: 132119544 kB notes_plat_sysinfo_100 = HugePages_Total: 0 notes_plat_sysinfo_105 = Hugepagesize: 2048 kB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = /usr/bin/lsb_release -d notes_plat_sysinfo_120 = Red Hat Enterprise Linux Server release 6.3 (Santiago) notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = From /etc/*release* /etc/*version* notes_plat_sysinfo_135 = redhat-release: Red Hat Enterprise Linux Server release 6.3 (Santiago) notes_plat_sysinfo_140 = system-release: Red Hat Enterprise Linux Server release 6.3 (Santiago) notes_plat_sysinfo_145 = system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = uname -a: notes_plat_sysinfo_160 = Linux mpaton350b.perflabs.hp.com 2.6.32-279.el6.x86_64 #1 SMP Wed Jun 13 notes_plat_sysinfo_165 = 18:24:36 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = run-level 3 Oct 17 14:19 last=5 notes_plat_sysinfo_180 = notes_plat_sysinfo_185 = SPEC is set to: /SPEC notes_plat_sysinfo_190 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_195 = /dev/sda7 ext4 108G 6.5G 96G 7% /SPEC notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = Additional information from dmidecode: notes_plat_sysinfo_210 = BIOS HP P72 08/20/2012 notes_plat_sysinfo_215 = Memory: notes_plat_sysinfo_220 = 16x HP Not Specified 8 GB 1600 MHz 2 rank notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2620 hw_memory001 = at 1333 MHz and CL9) hw_nchips = 2 prepared_by = Hewlett-Packard Company sw_file = ext4 sw_os000 = Red Hat Enterprise Linux Server release 6.3, sw_os001 = (Santiago) sw_os002 = 2.6.32-279.el6.x86_64 sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_010 =LD_LIBRARY_PATH = "/SPEC/libs3/32:/SPEC/libs3/64" notes_015 =