# Invocation command line: # /SPECcpu2006/bin/runspec -c cpu2006.1.2.ic12.1.linux64.mix.speed.cfg --define cores=6 --flagsurl=Intel-ic12.1-official-linux64.xml,Fujitsu-Platform.xml --define THP_enabled -T all -o asc,pdf,cfg fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 12.1 # Operating system version: 64-Bit RedHat Enterprise Linux64 5.5 # Hardware: Intel processors supporting AVX # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Aug 2011 Intel Compiler 12.1 for Linux64 ############################################################################ action = validate tune = base,peak %define version 12apr2012 ext = cpu2006.1.2.ic12.1.linux64.mix.speed.%{version} fail_build = 1 PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6800 -f -p # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64 preENV_OMP_NUM_THREADS = %{cores} preENV_KMP_AFFINITY = granularity=fine,scatter # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /opt/SmartHeap/lib SMARTHEAP64_DIR = /opt/SmartHeap/lib64 SSE = -xSSE4.2 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o SSE = -xAVX #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div -static ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m32 PORTABILITY= CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: COPTIMIZE= -xAVX -ipo -O3 -no-prec-div -inline-calloc -opt-malloc-options=3 -auto-ilp32 feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 -ansi-alias feedback=0 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: COPTIMIZE= -xAVX -ipo -O3 -no-prec-div -parallel -opt-prefetch -auto-p32 feedback=no 464.h264ref=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: OPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -parallel -static feedback=0 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- -static 433.milc=peak=default: OPTIMIZE= -static 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: CXXOPTIMIZE= -xSSE4.2 -ipo -O3 -no-prec-div -static -opt-prefetch -ansi-alias feedback=no 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: PASS2_FFLAGS= -xSSE4.2 -ipo -O3 -no-prec-div -prof-use PASS2_LDFLAGS = -xSSE4.2 -ipo -O3 -no-prec-div -prof-use OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: OPTIMIZE= $(FASTNOSTATIC) COPTIMIZE= -unroll2 -ansi-alias -parallel feedback=no #include: SUT-speed.conf # ----- Begin inclusion of 'SUT-speed.conf' ############################################################################ default=default=default=default: license_num = 19 test_sponsor = Fujitsu hw_avail = Jul-2012 sw_avail = Feb-2012 tester = Fujitsu hw_nchips = 1 hw_memory = 48 GB (6 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_disk = 1 x SATA, 500 GB, 7200 RPM hw_fpu = Integrated hw_ncpuorder = 1 chip hw_vendor = Fujitsu sw_file = ext4 hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_other = None hw_nthreadspercore = 1 prepared_by = Fujitsu sw_os000 = Red Hat Enterprise Linux Server release 6.2 sw_os001 = (Santiago) sw_os002 = 2.6.32-220.el6.x86_64 sw_state = Run level 3 (multi-user) notes_plat_000= BIOS configuration: notes_plat_005= Intel HT Technology = Disable notes_plat_010= Frequency Floor Override = Enable hw_cpu_name = Intel Xeon E5-2430 hw_cpu_char = Intel Turbo Boost Technology up to 2.70 GHz hw_cpu_mhz = 2200 hw_model = PRIMERGY TX150 S8, Intel Xeon E5-2430, 2.20 GHz hw_ncores = 6 hw_nchips = 1 hw_ncoresperchip = 6 hw_memory000 = 48 GB (6 x 8 GB 2Rx4 PC3L-12800R-11, ECC, running hw_memory001 = at 1333 MHz and CL9) hw_tcache = 15 MB I+D on chip per chip # ---- End inclusion of '/SPECcpu2006/config/SUT-speed.conf' notes_025 = Binaries compiled on a system with 1x E3-1270v2 CPU + 32 GB notes_030 = memory using RHEL6.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Transparent Huge Pages enabled with: notes_os_010 = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled int=default=default=default: sw_compiler001 = C/C++: Version 12.1.0.293 of Intel C++ Studio XE sw_compiler002 = for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.0 default: %ifdef %{THP_enabled} notes_035 = For information about Fujitsu please visit: http://www.fujitsu.com %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 12.1.0.293 of Intel C++ Studio XE sw_compiler001 = for Linux; sw_compiler002 = Fortran: Version 12.1.0.293 of Intel Fortran sw_compiler003 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6800 -f -p' default: # Sysinfo program /SPECcpu2006/config/sysinfo.rev6800 # $Rev: 6800 $ $Date:: 2011-10-11 #$ 6f2ebdff5032aaa42e583f96b07f99d3 # running on localhost Mon Jun 11 18:50:06 2012 # # This section contains SUT (System Under Test) info as seen by # some common utilities. To remove or add to this section, see: # http://www.spec.org/cpu2006/Docs/config.html#sysinfo # # From /proc/cpuinfo # model name : Intel(R) Xeon(R) CPU E5-2430 0 @ 2.20GHz # 1 "physical id"s (chips) # 6 "processors" # cores, siblings (Caution: counting these is hw and system dependent. The # following excerpts from /proc/cpuinfo might not be reliable. Use with # caution.) # cpu cores : 6 # siblings : 6 # physical 0: cores 0 1 2 3 4 5 # cache size : 15360 KB # # From /proc/meminfo # MemTotal: 49400292 kB # HugePages_Total: 0 # Hugepagesize: 2048 kB # # /usr/bin/lsb_release -d # Red Hat Enterprise Linux Server release 6.2 (Santiago) # # From /etc/*release* /etc/*version* # redhat-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) # system-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) # system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server # # uname -a: # Linux localhost 2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 # x86_64 x86_64 x86_64 GNU/Linux # # run-level 3 Jun 11 11:35 # # SPEC is set to: /SPECcpu2006 # Filesystem Type Size Used Avail Use% Mounted on # /dev/mapper/vg_rx300s7-lv_root # ext4 50G 7.0G 40G 15% / # # Additional information from dmidecode: # Memory: # 5x Hynix Semiconducto HMT31GR7CFR4A 8 GB 1333 MHz 1 rank # 1x Hynix Semiconductor HMT31GR7CFR4A- 8 GB 1333 MHz 1 rank # # (End of data from sysinfo program) # hw_cpu_name = Intel Xeon E5-2430 0 # hw_disk = 50 GB add more disk info here # hw_memory001 = 47.112 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 1 # prepared_by = root (is never output, only tags rawfile) # sw_file = ext4 # sw_os001 = Red Hat Enterprise Linux Server release 6.2 (Santiago) # sw_os002 = 2.6.32-220.el6.x86_64 # sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 482.sphinx3: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.xml flagsurl001 = http://www.spec.org/cpu2006/flags/Fujitsu-Platform.20120320.xml notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,scatter" notes_010 =LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64" notes_015 =OMP_NUM_THREADS = "6" notes_020 =