# Invocation command line:
# /home/bsc/cpu2006/bin/runspec --config=BladeSymphony_int_rate -T all --reportable --rate --copies=128 int
# output_root was not used for this run
############################################################################
############################################################################
# SPEC CPU2006 Intel Linux64 EM64T config file
# HITACHI BladeSymphony
# Intel Compiler 11.1 for Linux64 EM64T

action      = validate
tune        = base
ext         = cpu2006.linux64.em64t.ic111.exe
PATHSEP     = /
check_md5   = 1
reportable  = 1
mean_anyway = 1
bench_post_setup=sync

##### Compiler section
default=default=default=default:
CC  = icc -m32
CXX = icpc -m32
OBJ = .o
SMARTHEAP_DIR = /home/bsc/smartheap/lib

submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

##### SSE4.2
SSE          = -xSSE4.2
FAST         =  $(SSE) -ipo -O3 -no-prec-div -static
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div

##### Portability & libraries

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

##### Tuning Flags
default=base=default=default:
sw_base_ptrsize = 32-bit
sw_peak_ptrsize = 32/64-bit

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE= $(FAST) -opt-prefetch
CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch

int=peak=default=default:
COPTIMIZE= -auto-ilp32 -ansi-alias
CXXOPTIMIZE= -ansi-alias
PASS1_CFLAGS = -prof-gen
PASS2_CFLAGS = $(FAST) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS = -prof-gen
PASS2_LDCFLAGS = $(FAST) -prof-use
PASS1_LDCXXFLAGS =  -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
COPTIMIZE= -ansi-alias

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch -ansi-alias -auto-ilp32

403.gcc=peak=default:
COPTIMIZE = $(FAST)
feedback=0

429.mcf=peak=default:
COPTIMIZE= $(FAST) -opt-prefetch
feedback=0
##copies=8
#######################################################################
##%ifdef %{up-nhm}
##copies=4
##%endif
##%ifdef %{dp-nhm}
##copies=8
##%endif
##%ifdef %{up-wsm-6c}
##copies=6
##%endif
##%ifdef %{dp-wsm-6c}
##copies=12
##%endif
##%ifdef %{1p-nhm-ex}
##copies=8
##%endif
##%ifdef %{2p-nhm-ex}
##copies=16
##%endif
##%ifdef %{4p-nhm-ex}
##copies=32
##%endif
#######################################################################

445.gobmk=peak=default:
COPTIMIZE= -O2 -ipo -no-prec-div -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= $(FAST) -unroll2 -ansi-alias -auto-ilp32
feedback=no
#######################################################################
##%ifdef %{up-nhm}
##copies=4
##%endif
##%ifdef %{dp-nhm}
##copies=8
##%endif
##%ifdef %{up-wsm-6c}
##copies=6
##%endif
##%ifdef %{dp-wsm-6c}
##copies=12
##%endif
##%ifdef %{1p-nhm-ex}
##copies=8
##%endif
##%ifdef %{2p-nhm-ex}
##copies=16
##%endif
##%ifdef %{4p-nhm-ex}
##copies=32
##%endif
#######################################################################

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
COPTIMIZE= -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXX= icpc -m64
CXXPORTABILITY= -DSPEC_CPU_LP64
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap64
CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

#################################################################
default=default=default=default:
license_num      = 872
test_sponsor     = HITACHI
hw_avail         = Aug-2010
sw_avail         = Apr-2010
tester           = HITACHI
hw_cpu_name      = Intel Xeon X7560
hw_cpu_char      = Intel Turbo Boost Technology up to 2.67 GHz
hw_cpu_mhz       = 2266
hw_disk000       = 10 x 73 GB 15000 rpm Fibre Channel
hw_disk001 = RAID1+0 configuration
hw_fpu           = Integrated
hw_memory000     = 512 GB(128 x 4 GB PC3-10600R,
hw_memory001 = 2 rank, CL9-9-9)
hw_model         = BladeSymphony BS2000 (Intel Xeon X7560)
hw_ncpuorder     = 1, 2, 4, 8 chips
hw_ncores        = 64
hw_nchips        = 8
hw_ncoresperchip = 8
hw_nthreadspercore = 2
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 24 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = HITACHI
prepared_by      = HITACHI
sw_file          = ext3
sw_os000         = Red Hat Enterprise Linux
sw_os001         = Server release 5.4, Advanced Platform,
sw_os002         = Kernel 2.6.18-164.15.1.el5 on an x86_64
sw_state         = Multi-user run level 3
sw_other         = Microquill SmartHeap V8.1

int=default=default=default:
sw_compiler000   = Intel C++ Compiler 11.1 for Linux
sw_compiler001   = Build 20100414 Package ID: l_cproc_p_11.1.072




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic11.1-linux64-revE.20100929.03.xml
notes_submit_000 ='/usr/bin/numactl' used to bind processes to CPUs
notes_os_000 ='ulimit -s unlimited' was used to set the stacksize to unlimited prior to run