CPU2006 Flag Description
IBM Corporation IBM System x3400 M2 (Intel Xeon E5530)

Base Optimization Flags

C benchmarks

• • -xSSE4.2
  • 
  • COPTIMIZE

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -ipo
  • 
  • COPTIMIZE

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • COPTIMIZE

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • COPTIMIZE
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • COPTIMIZE

  • Compiler option to statically link in libraries at link time

• • -inline-calloc
  • 
  • COPTIMIZE

  • Directs the compiler to inline calloc() calls as malloc()/memset()

• • -opt-malloc-options=3
  • 
  • COPTIMIZE

  • The compiler adds setup code in the C/C++/Fortran main function to enable optimal malloc algorithms:

    • n=0: Default, no changes to the malloc options. No call to mallopt() is made.
    • n=1: M_MMAP_MAX=2 and M_TRIM_THRESHOLD=0x10000000. Call mallopt with the two settings.
    • n=2: M_MMAP_MAX=2 and M_TRIM_THRESHOLD=0x40000000. Call mallopt with these two settings.
    • n=3: M_MMAP_MAX=0 and M_TRIM_THRESHOLD=-1. Call mallopt with these two settings. This will cause use of sbrk() calls instead of mmap() calls to get memory from the system.

    The two parameters, M_MMAP_MAX and M_TRIM_THRESHOLD, are described below

    Function: int mallopt (int param, int value) When calling mallopt, the param argument specifies the parameter to be set, and value the new value to be set. Possible choices for param, as defined in malloc.h, are:

    • M_TRIM_THRESHOLD This is the minimum size (in bytes) of the top-most, releasable chunk that will cause sbrk to be called with a negative argument in order to return memory to the system.
    • M_TOP_PAD This parameter determines the amount of extra memory to obtain from the system when a call to sbrk is required. It also specifies the number of bytes to retain when shrinking the heap by calling sbrk with a negative argument. This provides the necessary hysteresis in heap size such that excessive amounts of system calls can be avoided.
    • M_MMAP_THRESHOLD All chunks larger than this value are allocated outside the normal heap, using the mmap system call. This way it is guaranteed that the memory for these chunks can be returned to the system on free. Note that requests smaller than this threshold might still be allocated via mmap.
    • M_MMAP_MAX The maximum number of chunks to allocate with mmap. Setting this to zero disables all use of mmap.
• • -opt-prefetch
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) the compiler to generate prefetch instructions to prefetch data.

C++ benchmarks

• • -xSSE4.2
  • 
  • CXXOPTIMIZE

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -ipo
  • 
  • CXXOPTIMIZE

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • CXXOPTIMIZE

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • CXXOPTIMIZE
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -opt-prefetch
  • 
  • CXXOPTIMIZE

  • Enable/disable(DEFAULT) the compiler to generate prefetch instructions to prefetch data.

• • -Wl,-z,muldefs
  • 
  • EXTRA_LDFLAGS

  • Enable SmartHeap and/or other library usage by forcing the linker to ignore multiple definitions if present

• • -L/spec/cpu2006.1.1/lib -lsmartheap
  • 
  • EXTRA_LIBS

  • MicroQuill SmartHeap Library V8.1 (32-bit) available from http://www.microquill.com/

Peak Optimization Flags

C benchmarks

400.perlbench

• • -xSSE4.2
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -prof-gen
  • 
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.

• • -ipo
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Compiler option to statically link in libraries at link time

• • -prof-use
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Instructs the compiler to produce a profile-optimized executable and merges available dynamic information (.dyn) files into a pgopti.dpi file. If you perform multiple executions of the instrumented program, -prof-use merges the dynamic information files again and overwrites the previous pgopti.dpi file.
    Without any other options, the current directory is searched for .dyn files

• • -ansi-alias
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) use of ANSI aliasing rules in optimizations; user asserts that the program adheres to these rules.

• • -opt-prefetch
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) the compiler to generate prefetch instructions to prefetch data.

401.bzip2

• • -xSSE4.2
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -prof-gen
  • 
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.

• • -ipo
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Compiler option to statically link in libraries at link time

• • -prof-use
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Instructs the compiler to produce a profile-optimized executable and merges available dynamic information (.dyn) files into a pgopti.dpi file. If you perform multiple executions of the instrumented program, -prof-use merges the dynamic information files again and overwrites the previous pgopti.dpi file.
    Without any other options, the current directory is searched for .dyn files

• • -opt-prefetch
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) the compiler to generate prefetch instructions to prefetch data.

• • -ansi-alias
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) use of ANSI aliasing rules in optimizations; user asserts that the program adheres to these rules.

• • -auto-ilp32
  • 
  • COPTIMIZE

  • This option instructs the compiler to analyze and transform the program so that 64-bit pointers are shrunk to 32-bit pointers, and 64-bit longs (on Linux) are shrunk into 32-bit longs wherever it is legal and safe to do so. In order for this option to be effective the compiler must be able to optimize using the -ipo/-Qipo option and must be able to analyze all library/external calls the program makes.

    This option requires that the size of the program executable never exceeds 2^32 bytes and all data values can be represented within 32 bits. If the program can run correctly in a 32-bit system, these requirements are implicitly satisfied. If the program violates these size restrictions, unpredictable behavior might occur.

403.gcc

• • -xSSE4.2
  • 
  • COPTIMIZE

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -ipo
  • 
  • COPTIMIZE

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • COPTIMIZE

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • COPTIMIZE
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • COPTIMIZE

  • Compiler option to statically link in libraries at link time

• • -inline-calloc
  • 
  • COPTIMIZE

  • Directs the compiler to inline calloc() calls as malloc()/memset()

• • -opt-malloc-options=3
  • 
  • COPTIMIZE

  • The compiler adds setup code in the C/C++/Fortran main function to enable optimal malloc algorithms:

    • n=0: Default, no changes to the malloc options. No call to mallopt() is made.
    • n=1: M_MMAP_MAX=2 and M_TRIM_THRESHOLD=0x10000000. Call mallopt with the two settings.
    • n=2: M_MMAP_MAX=2 and M_TRIM_THRESHOLD=0x40000000. Call mallopt with these two settings.
    • n=3: M_MMAP_MAX=0 and M_TRIM_THRESHOLD=-1. Call mallopt with these two settings. This will cause use of sbrk() calls instead of mmap() calls to get memory from the system.

    The two parameters, M_MMAP_MAX and M_TRIM_THRESHOLD, are described below

    Function: int mallopt (int param, int value) When calling mallopt, the param argument specifies the parameter to be set, and value the new value to be set. Possible choices for param, as defined in malloc.h, are:

    • M_TRIM_THRESHOLD This is the minimum size (in bytes) of the top-most, releasable chunk that will cause sbrk to be called with a negative argument in order to return memory to the system.
    • M_TOP_PAD This parameter determines the amount of extra memory to obtain from the system when a call to sbrk is required. It also specifies the number of bytes to retain when shrinking the heap by calling sbrk with a negative argument. This provides the necessary hysteresis in heap size such that excessive amounts of system calls can be avoided.
    • M_MMAP_THRESHOLD All chunks larger than this value are allocated outside the normal heap, using the mmap system call. This way it is guaranteed that the memory for these chunks can be returned to the system on free. Note that requests smaller than this threshold might still be allocated via mmap.
    • M_MMAP_MAX The maximum number of chunks to allocate with mmap. Setting this to zero disables all use of mmap.

429.mcf

• • -xSSE4.2
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -prof-gen
  • 
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.

• • -ipo
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Compiler option to statically link in libraries at link time

• • -prof-use
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Instructs the compiler to produce a profile-optimized executable and merges available dynamic information (.dyn) files into a pgopti.dpi file. If you perform multiple executions of the instrumented program, -prof-use merges the dynamic information files again and overwrites the previous pgopti.dpi file.
    Without any other options, the current directory is searched for .dyn files

• • -opt-prefetch
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) the compiler to generate prefetch instructions to prefetch data.

445.gobmk

• • -xSSE4.2
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -prof-gen
  • 
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.

• • -prof-use
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Instructs the compiler to produce a profile-optimized executable and merges available dynamic information (.dyn) files into a pgopti.dpi file. If you perform multiple executions of the instrumented program, -prof-use merges the dynamic information files again and overwrites the previous pgopti.dpi file.
    Without any other options, the current directory is searched for .dyn files

• • -O2
  • 
  • COPTIMIZE

  • Enables optimizations for speed. This is the generally recommended optimization level. This option also enables:
    - Inlining of intrinsics
    - Intra-file interprocedural optimizations, which include:
    - inlining
    - constant propagation
    - forward substitution
    - routine attribute propagation
    - variable address-taken analysis
    - dead static function elimination
    - removal of unreferenced variables
    - The following capabilities for performance gain:
    - constant propagation
    - copy propagation
    - dead-code elimination
    - global register allocation
    - global instruction scheduling and control speculation
    - loop unrolling
    - optimized code selection
    - partial redundancy elimination
    - strength reduction/induction variable simplification
    - variable renaming
    - exception handling optimizations
    - tail recursions
    - peephole optimizations
    - structure assignment lowering and optimizations
    - dead store elimination
    

  • Includes:
    • -O1
      • -funroll-loops
      • -fno-builtin
      • -mno-ieee-fp
      • -fomit-framepointer
      • -ffunction-sections
      • -ftz
• • -ipo
  • 
  • COPTIMIZE

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -no-prec-div
  • 
  • COPTIMIZE
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -ansi-alias
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) use of ANSI aliasing rules in optimizations; user asserts that the program adheres to these rules.

456.hmmer

• • -xSSE4.2
  • 
  • COPTIMIZE

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -ipo
  • 
  • COPTIMIZE

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • COPTIMIZE

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • COPTIMIZE
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • COPTIMIZE

  • Compiler option to statically link in libraries at link time

• • -unroll2
  • 
  • COPTIMIZE

  • This option sets the maximum number of times a loop can be unrolled, to 2.

• • -ansi-alias
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) use of ANSI aliasing rules in optimizations; user asserts that the program adheres to these rules.

• • -auto-ilp32
  • 
  • COPTIMIZE

  • This option instructs the compiler to analyze and transform the program so that 64-bit pointers are shrunk to 32-bit pointers, and 64-bit longs (on Linux) are shrunk into 32-bit longs wherever it is legal and safe to do so. In order for this option to be effective the compiler must be able to optimize using the -ipo/-Qipo option and must be able to analyze all library/external calls the program makes.

    This option requires that the size of the program executable never exceeds 2^32 bytes and all data values can be represented within 32 bits. If the program can run correctly in a 32-bit system, these requirements are implicitly satisfied. If the program violates these size restrictions, unpredictable behavior might occur.

458.sjeng

• • -xSSE4.2
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -prof-gen
  • 
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.

• • -ipo
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Compiler option to statically link in libraries at link time

• • -prof-use
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Instructs the compiler to produce a profile-optimized executable and merges available dynamic information (.dyn) files into a pgopti.dpi file. If you perform multiple executions of the instrumented program, -prof-use merges the dynamic information files again and overwrites the previous pgopti.dpi file.
    Without any other options, the current directory is searched for .dyn files

• • -unroll4
  • 
  • COPTIMIZE

  • This option sets the maximum number of times a loop can be unrolled, to 4.

• • -auto-ilp32
  • 
  • COPTIMIZE

  • This option instructs the compiler to analyze and transform the program so that 64-bit pointers are shrunk to 32-bit pointers, and 64-bit longs (on Linux) are shrunk into 32-bit longs wherever it is legal and safe to do so. In order for this option to be effective the compiler must be able to optimize using the -ipo/-Qipo option and must be able to analyze all library/external calls the program makes.

    This option requires that the size of the program executable never exceeds 2^32 bytes and all data values can be represented within 32 bits. If the program can run correctly in a 32-bit system, these requirements are implicitly satisfied. If the program violates these size restrictions, unpredictable behavior might occur.

462.libquantum

• • -xSSE4.2
  • 
  • COPTIMIZE

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -ipo
  • 
  • COPTIMIZE

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • COPTIMIZE

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • COPTIMIZE
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • COPTIMIZE

  • Compiler option to statically link in libraries at link time

• • -opt-malloc-options=3
  • 
  • COPTIMIZE

  • The compiler adds setup code in the C/C++/Fortran main function to enable optimal malloc algorithms:

    • n=0: Default, no changes to the malloc options. No call to mallopt() is made.
    • n=1: M_MMAP_MAX=2 and M_TRIM_THRESHOLD=0x10000000. Call mallopt with the two settings.
    • n=2: M_MMAP_MAX=2 and M_TRIM_THRESHOLD=0x40000000. Call mallopt with these two settings.
    • n=3: M_MMAP_MAX=0 and M_TRIM_THRESHOLD=-1. Call mallopt with these two settings. This will cause use of sbrk() calls instead of mmap() calls to get memory from the system.

    The two parameters, M_MMAP_MAX and M_TRIM_THRESHOLD, are described below

    Function: int mallopt (int param, int value) When calling mallopt, the param argument specifies the parameter to be set, and value the new value to be set. Possible choices for param, as defined in malloc.h, are:

    • M_TRIM_THRESHOLD This is the minimum size (in bytes) of the top-most, releasable chunk that will cause sbrk to be called with a negative argument in order to return memory to the system.
    • M_TOP_PAD This parameter determines the amount of extra memory to obtain from the system when a call to sbrk is required. It also specifies the number of bytes to retain when shrinking the heap by calling sbrk with a negative argument. This provides the necessary hysteresis in heap size such that excessive amounts of system calls can be avoided.
    • M_MMAP_THRESHOLD All chunks larger than this value are allocated outside the normal heap, using the mmap system call. This way it is guaranteed that the memory for these chunks can be returned to the system on free. Note that requests smaller than this threshold might still be allocated via mmap.
    • M_MMAP_MAX The maximum number of chunks to allocate with mmap. Setting this to zero disables all use of mmap.
• • -opt-prefetch
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) the compiler to generate prefetch instructions to prefetch data.

464.h264ref

• • -xSSE4.2
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -prof-gen
  • 
  • PASS1_CFLAGS, PASS1_LDCFLAGS

  • Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.

• • -ipo
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -static
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Compiler option to statically link in libraries at link time

• • -prof-use
  • 
  • PASS2_CFLAGS, PASS2_LDCFLAGS

  • Instructs the compiler to produce a profile-optimized executable and merges available dynamic information (.dyn) files into a pgopti.dpi file. If you perform multiple executions of the instrumented program, -prof-use merges the dynamic information files again and overwrites the previous pgopti.dpi file.
    Without any other options, the current directory is searched for .dyn files

• • -unroll2
  • 
  • COPTIMIZE

  • This option sets the maximum number of times a loop can be unrolled, to 2.

• • -ansi-alias
  • 
  • COPTIMIZE

  • Enable/disable(DEFAULT) use of ANSI aliasing rules in optimizations; user asserts that the program adheres to these rules.

C++ benchmarks

471.omnetpp

• • basepeak = yes

473.astar

• • -xSSE4.2
  • 
  • PASS2_CXXFLAGS, PASS2_LDCXXFLAGS

  • Code is optimized for Intel(R) processors with support for SSE 4.2 instructions. The resulting code may contain unconditional use of features that are not supported on other processors. This option also enables new optimizations in addition to Intel processor-specific optimizations including advanced data layout and code restructuring optimizations to improve memory accesses for Intel processors.

    Do not use this option if you are executing a program on a processor that is not an Intel processor. If you use this option on a non-compatible processor to compile the main program (in Fortran) or the function main() in C/C++, the program will display a fatal run-time error if they are executed on unsupported processors.

• • -prof-gen
  • 
  • PASS1_CXXFLAGS, PASS1_LDCXXFLAGS

  • Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.

• • -ipo
  • 
  • PASS2_CXXFLAGS, PASS2_LDCXXFLAGS

  • Multi-file ip optimizations that includes:
    - inline function expansion
    - interprocedural constant propogation
    - dead code elimination
    - propagation of function characteristics
    - passing arguments in registers
    - loop-invariant code motion

• • -O3
  • 
  • PASS2_CXXFLAGS, PASS2_LDCXXFLAGS

  • Enables O2 optimizations plus more aggressive optimizations, such as prefetching, scalar replacement, and loop and memory access transformations. Enables optimizations for maximum speed, such as:

    • Loop unrolling, including instruction scheduling
    • Code replication to eliminate branches
    • Padding the size of certain power-of-two arrays to allow more efficient cache use.
    
    

    On IA-32 and Intel EM64T processors, when O3 is used with options -ax or -x (Linux) or with options /Qax or /Qx (Windows), the compiler performs more aggressive data dependency analysis than for O2, which may result in longer compilation times. The O3 optimizations may not cause higher performance unless loop and memory access transformations take place. The optimizations may slow down code in some cases compared to O2 optimizations. The O3 option is recommended for applications that have loops that heavily use floating-point calculations and process large data sets.

  • Includes:
    • -O2
      • -O1
        • -funroll-loops
        • -fno-builtin
        • -mno-ieee-fp
        • -fomit-framepointer
        • -ffunction-sections
        • -ftz
• • -no-prec-div
  • 
  • PASS2_CXXFLAGS, PASS2_LDCXXFLAGS
  • (disable/enable[default] -prec-div)

    -no-prec-div enables optimizations that give slightly less precise results than full IEEE division.

    When you specify -no-prec-div along with some optimizations, such as -xN and -xB (Linux) or /QxN and /QxB (Windows), the compiler may change floating-point division computations into multiplication by the reciprocal of the denominator. For example, A/B is computed as A * (1/B) to improve the speed of the computation.

    However, sometimes the value produced by this transformation is not as accurate as full IEEE division. When it is important to have fully precise IEEE division, do not use -no-prec-div. This will enable the default -prec-div and the result will be more accurate, with some loss of performance.

• • -prof-use
  • 
  • PASS2_CXXFLAGS, PASS2_LDCXXFLAGS

  • Instructs the compiler to produce a profile-optimized executable and merges available dynamic information (.dyn) files into a pgopti.dpi file. If you perform multiple executions of the instrumented program, -prof-use merges the dynamic information files again and overwrites the previous pgopti.dpi file.
    Without any other options, the current directory is searched for .dyn files

• • -ansi-alias
  • 
  • CXXOPTIMIZE

  • Enable/disable(DEFAULT) use of ANSI aliasing rules in optimizations; user asserts that the program adheres to these rules.

• • -opt-ra-region-strategy=routine
  • 
  • CXXOPTIMIZE

  • Select the method that the register allocator uses to partition each routine into regions

    • routine - one region per routine
    • block - one region per block
    • trace - one region per trace
    • loop - one region per loop
    • default - compiler selects best option
• • -auto-ilp32
  • 
  • CXXOPTIMIZE

  • This option instructs the compiler to analyze and transform the program so that 64-bit pointers are shrunk to 32-bit pointers, and 64-bit longs (on Linux) are shrunk into 32-bit longs wherever it is legal and safe to do so. In order for this option to be effective the compiler must be able to optimize using the -ipo/-Qipo option and must be able to analyze all library/external calls the program makes.

    This option requires that the size of the program executable never exceeds 2^32 bytes and all data values can be represented within 32 bits. If the program can run correctly in a 32-bit system, these requirements are implicitly satisfied. If the program violates these size restrictions, unpredictable behavior might occur.

• • -Wl,-z,muldefs
  • 
  • EXTRA_LDFLAGS

  • Enable SmartHeap and/or other library usage by forcing the linker to ignore multiple definitions if present

• • -L/spec/cpu2006.1.1/lib -lsmartheap64
  • 
  • EXTRA_LIBS

  • MicroQuill SmartHeap Library V8.1 (64-bit) available from http://www.microquill.com/

483.xalancbmk

• • basepeak = yes

#!/usr/bin/perl
 
use strict;
use Cwd;
 
# The order in which we want copies to be bound to cores
# Copies: 0, 1, 2, 3
# Cores:  0, 1, 3, 6
 
my $rundir        = getcwd;
 
my $copynum = shift @ARGV;

my $i;
my $j;
my $tag;
my $num;
my $core;
my $numofcores; 

my @proc;
my @cores;

open(INPUT, "/proc/cpuinfo") or
   die "can't open /proc/cpuinfo\n"; 

#open(OUTPUT, "STDOUT");

# proc[i][0] = logical processor ID
# proc[i][1] = physical processor ID
# proc[i][2] = core ID

$i = 0;
$numofcores = 0;

while(<INPUT>)
{
  chop;
 
  ($tag, $num) = split(/\s+:\s+/, $_);


  if ($tag eq "processor") {
      $proc[$i][0] = $num;
  }

  if ($tag eq "physical id") {
      $proc[$i][1] = $num;
  }

  if ($tag eq "core id") {
      $proc[$i][2] = $num;
      $i++;
      $numofcores++;
  }
}

$i = 0;
$j = 0;

for $core (0, 4, 2, 1, 5, 3) {
  while ($i < $numofcores) {
     if ($proc[$i][2] == $core) {
        $cores[$j] = $proc[$i][0];
        $j++;
     }
     $i++;
  }
  $i=0;
}

open  RUNCOMMAND, "> runcommand" or die "failed to create run file";
print RUNCOMMAND "cd $rundir\n";
print RUNCOMMAND "@ARGV\n";
close RUNCOMMAND;
system 'taskset', '-c', $cores[$copynum], 'sh', "$rundir/runcommand";