# Invocation command line: # /cpu2006.1.1/bin/runspec --rate 8 -c cpu2006.1.1.ic11.0.linux64.sse41.rate.cfg --flagsurl=Intel-ic11.0-int-linux64-revA.xml --define stoakleydp8cores -T all -o pdf int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 11.0 # Operating system version: 64-Bit SUSE LINUX Enterprise Server 10 or later # Hardware: Intel Core 2 and compatible Intel processors # supporting Intel 64 and SSE4.1 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # July 2008 Intel Compiler 11.0 for Linux64 ############################################################################ action = validate tune = base ext = cpu2006.1.1.ic11.0.linux64.sse41.rate PATHSEP = / check_md5=1 reportable=1 # # These are listed as benchmark-tuning-extension-machine # default=default=default=default: CC = icc CXX = icpc FC=ifort OBJ = .o SMARTHEAP_DIR = /spec/cpu2006.1.1/lib submit= MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; taskset \$MYMASK $command #################################################################### # Compiler options # for Dunnington use -xSSE4.1 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### SSE = -xSSE4.1 FAST = $(SSE) -ipo -O3 -no-prec-div -static FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST) -inline-calloc -opt-malloc-options=3 -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch fp=base=default=default: OPTIMIZE= $(FAST) -opt-prefetch ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= $(FAST) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 400.perlbench=peak=default: COPTIMIZE= $(FAST) -ansi-alias -opt-prefetch 401.bzip2=peak=default: CC= /opt/intel/Compiler/11.0/066/bin/intel64/icc CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FAST) -opt-prefetch -ansi-alias 403.gcc=peak=default: COPTIMIZE = $(FAST) -inline-calloc -opt-malloc-options=3 feedback=0 429.mcf=peak=default: COPTIMIZE= $(FAST) -opt-prefetch 445.gobmk=peak=default: COPTIMIZE= $(SSE) -O2 -ipo -no-prec-div -ansi-alias 456.hmmer=peak=default: CC= /opt/intel/Compiler/11.0/066/bin/intel64/icc CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FAST) -unroll2 -ansi-alias feedback=no 458.sjeng=peak=default: COPTIMIZE= $(FAST) -unroll4 462.libquantum=peak=default: COPTIMIZE= $(FAST) -opt-malloc-options=3 -parallel -par-runtime-control -opt-prefetch feedback=no copies=1 submit= 464.h264ref=peak=default: COPTIMIZE= $(FAST) -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= $(FASTNOSTATIC) -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: CXXOPTIMIZE= $(FASTNOSTATIC) -ansi-alias -opt-ra-region-strategy=routine 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: OPTIMIZE= $(FAST) COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 410.bwaves=peak=default: OPTIMIZE= $(FAST) -opt-prefetch feedback=0 #################################################################################################################################### %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= $(FAST) -unroll2 -Ob0 -ansi-alias -scalar-rep- 433.milc=peak=default: OPTIMIZE= $(FAST) -fno-alias COPTIMIZE= 435.gromacs=peak=default: OPTIMIZE= $(FAST) -opt-prefetch 436.cactusADM=peak=default: OPTIMIZE= $(FAST) -unroll2 -opt-prefetch -parallel copies=1 submit= 437.leslie3d=peak=default: PORTABILITY = FC= ifort -m32 OPTIMIZE= $(FAST) -opt-malloc-options=3 -opt-prefetch #################################################################################################################################### %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= $(FAST) -fno-alias -auto-ilp32 447.dealII=peak=default: CXXOPTIMIZE= $(FAST) -unroll2 -ansi-alias -scalar-rep- 450.soplex=peak=default: PORTABILITY = CXX= icpc -m32 OPTIMIZE= $(FAST) -opt-malloc-options=3 CXXOPTIMIZE= 453.povray=peak=default: CXXOPTIMIZE= $(FAST) -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FAST) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= $(FAST) -unroll2 -Ob0 -opt-prefetch 465.tonto=peak=default: OPTIMIZE= $(FAST) -unroll4 -auto 470.lbm=peak=default: OPTIMIZE= $(FAST) -opt-prefetch feedback=no #################################################################################################################################### %ifdef %{bensleydp8cores} copies=2 submit= if `test $SPECCOPYNUM -le 0`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif %ifdef %{tgt4p16cores} copies=8 submit= if `test $SPECCOPYNUM -le 3`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 8` $command ; fi %endif %ifdef %{dgt4p24cores} copies=12 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif %ifdef %{dgt4p16cores} copies=8 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif #################################################################################################################################### 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: PORTABILITY = CC= icc -m32 COPTIMIZE= -unroll2 feedback=no #################################################################################################################################### %ifdef %{stoakleydp8cores} copies=4 submit= if `test $SPECCOPYNUM -le 1`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 4` $command ; fi %endif %ifdef %{tgt4p16cores} copies=8 submit= if `test $SPECCOPYNUM -le 3`; then taskset -c $SPECCOPYNUM $command ; else taskset -c `expr $SPECCOPYNUM + 8` $command ; fi %endif %ifdef %{dgt4p24cores} copies=12 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif %ifdef %{dgt4p16cores} copies=8 submit= $[top]/mysubmit.pl $SPECCOPYNUM "$command" %endif #################################################################################################################################### ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 9008 test_sponsor = ACTION S.A. hw_avail = Sep-2008 sw_avail = Nov-2008 tester = ACTION S.A. hw_cpu_name = Intel Xeon E5420 hw_cpu_char = 1333 MHz System Bus hw_cpu_mhz = 2500 hw_disk = 500 GB SATA, 7200 RPM hw_fpu = Integrated hw_memory = 16 GB (8x 2 GB, PC2-5300, CL 5-5-5, FB ECC) hw_model = ACTINA SOLAR 222 X2 (Intel Xeon E5420, 2.5 GHz) hw_ncpuorder = 1,2 chips hw_ncores = 8 hw_nchips = 2 hw_ncoresperchip = 4 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores hw_tcache = None hw_ocache = None hw_vendor = ACTION S.A. prepared_by = ACTION S.A. sw_file = ReiserFS sw_os000 = SuSe Linux Enterprise Server 10 (x86_64) with sw_os001 = SP2, kernel 2.6.16.60-0.21-smp sw_state = Run level 3 (multi-user) int=default=default=default: sw_other000 = Microquill SmartHeap V8.1 sw_other001 = Binutils 2.18.50.0.7.20080502 sw_compiler000 = Intel C++ Compiler 11.0 for Linux sw_compiler001 = Build 20080930 Package ID: l_cproc_p_11.0.066 sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit notes_000 = 'taskset' was used to bind processes to cores except notes_005 = for 462.libquantum peak notes_010 = 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run notes_015 = OMP_NUM_THREADS set to number of processors notes_020 = KMP_AFFINITY set to "physical,0" notes_025 = KMP_STACKSIZE set to 64M fp=default=default=default: sw_other001 = Microquill SmartHeap V8.1 sw_other002 = Binutils 2.18.50.0.7.20080502 sw_compiler001 = Intel C++ and Fortran Compiler 11.0 for Linux sw_compiler002 = Build 20080930 Package ID: l_cproc_p_11.0.066, l_fproc_p_11.0.066 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit notes_026 = 'taskset' was used to bind processes to cores except notes_027 = for 436.cactusADM peak notes_028 = 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run notes_029 = OMP_NUM_THREADS set to number of processors notes_030 = KMP_AFFINITY set to "physical,0" notes_031 = KMP_STACKSIZE set to 64M ############################################################################### ###### End modification ############################################################################### # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic11.0-int-linux64-revA.20090713.00.xml notes_plat_000 =This result is measured on ACTINA SOLAR 222 X2. notes_plat_005 =Note that the ACTINA SOLAR 222 X2 and ACTINA SOLAR 212 X2 notes_plat_010 =are electrically equivalent.