SPEC® CFP2006 Result

Copyright 2006-2014 Standard Performance Evaluation Corporation

Fujitsu Siemens Computers

PRIMERGY RX300 S3, Intel Xeon processor X5355,
2.66 GHz

CPU2006 license: 22 Test date: Feb-2007
Test sponsor: Fujitsu Siemens Computers Hardware Availability: Jan-2007
Tested by: Fujitsu Siemens Computers Software Availability: Nov-2006
Benchmark results graph
Hardware
CPU Name: Intel Xeon X5355
CPU Characteristics: X5355
CPU MHz: 2666
FPU: Integrated
CPU(s) enabled: 8 cores, 2 chips, 4 cores/chip
CPU(s) orderable: 1,2 chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 8 MB I+D on chip per chip, 4 MB shared / 2 cores
L3 Cache: None
Other Cache: None
Memory: 16 GB (8x2 GB DDR2 PC2-5300F, 2 rank, CAS 5-5-5,
with ECC)
Disk Subsystem: SAS (73GB 15400 rpm)
Other Hardware: None
Software
Operating System: 64-Bit SUSE LINUX Enterprise Server 10, Kernel
2.6.16.21-0.8-smp on an x86_64
Compiler: Intel C++ Compiler for Linux64 EM64T version 9.1
Build 20061101, Package-ID l_cc_p_9.1.045
Intel Fortran Compiler for Linux64 EM64T version
9.1
Build 20061101 Package ID: l_fc_p_9.1.040
Auto Parallel: No
File System: ReiserFS
System State: Default
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other Software: None

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
410.bwaves 8 3240 33.6 3240 33.6 3238 33.6 8 3238 33.6 3238 33.6 3237 33.6
416.gamess 8 1071 146   1071 146   1071 146   8 1071 146   1071 146   1071 146  
433.milc 8 2407 30.5 2403 30.6 2408 30.5 8 2407 30.5 2403 30.6 2408 30.5
434.zeusmp 8 1204 60.4 1205 60.4 1219 59.7 8 1204 60.4 1205 60.4 1219 59.7
435.gromacs 8 476 120   478 119   476 120   8 459 124   459 124   459 124  
436.cactusADM 8 1403 68.1 1407 68.0 1400 68.3 8 1403 68.1 1407 68.0 1400 68.3
437.leslie3d 8 3086 24.4 3091 24.3 3101 24.3 8 3086 24.4 3091 24.3 3101 24.3
444.namd 8 579 111   578 111   578 111   8 579 111   578 111   578 111  
447.dealII 8 754 121   771 119   750 122   8 740 124   746 123   744 123  
450.soplex 8 2018 33.1 2022 33.0 2017 33.1 8 2018 33.1 2022 33.0 2017 33.1
453.povray 8 290 147   290 147   288 148   8 220 193   220 193   220 193  
454.calculix 8 665 99.2 661 99.8 655 101   8 630 105   653 101   642 103  
459.GemsFDTD 8 3461 24.5 3461 24.5 3461 24.5 8 3461 24.5 3461 24.5 3461 24.5
465.tonto 8 1044 75.4 1037 75.9 1042 75.5 8 1019 77.3 1014 77.7 1029 76.5
470.lbm 8 4493 24.5 4493 24.5 4493 24.5 8 4493 24.5 4493 24.5 4493 24.5
481.wrf 8 1945 45.9 1948 45.9 1944 46.0 8 1945 45.9 1948 45.9 1944 46.0
482.sphinx3 8 3112 50.1 3117 50.0 3115 50.1 8 3112 50.1 3117 50.0 3115 50.1

Operating System Notes

 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run

General Notes


 The PRIMERGY RX300 S3 and the PRIMERGY TX300 S3 are electronically equivalent.

 The system bus runs at 1333 MHz

 BIOS configuration:
 Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable


 For information about Fujitsu Siemens Computers in your country please see:
 http://www.fujitsu-siemens.com/countries

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Base Portability Flags

410.bwaves:  -DSPEC_CPU_LP64 
416.gamess:  -DSPEC_CPU_LP64 
433.milc:  -DSPEC_CPU_LP64 
434.zeusmp:  -DSPEC_CPU_LP64 
435.gromacs:  -DSPEC_CPU_LP64   -nofor_main 
436.cactusADM:  -DSPEC_CPU_LP64   -nofor_main 
437.leslie3d:  -DSPEC_CPU_LP64 
444.namd:  -DSPEC_CPU_LP64 
447.dealII:  -DSPEC_CPU_LP64 
450.soplex:  -DSPEC_CPU_LP64 
453.povray:  -DSPEC_CPU_LP64 
454.calculix:  -DSPEC_CPU_LP64   -nofor_main 
459.GemsFDTD:  -DSPEC_CPU_LP64 
465.tonto:  -DSPEC_CPU_LP64 
470.lbm:  -DSPEC_CPU_LP64 
481.wrf:  -DSPEC_CPU_LP64   -DSPEC_CPU_CASE_FLAG   -DSPEC_CPU_LINUX 
482.sphinx3:  -DSPEC_CPU_LP64 

Base Optimization Flags

C benchmarks:

 -fast 

C++ benchmarks:

 -fast 

Fortran benchmarks:

 -fast 

Benchmarks using both Fortran and C:

 -fast 

Peak Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

433.milc:  basepeak = yes 
470.lbm:  basepeak = yes 
482.sphinx3:  basepeak = yes 

C++ benchmarks:

444.namd:  basepeak = yes 
447.dealII:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
450.soplex:  basepeak = yes 
453.povray:  Same as 447.dealII 

Fortran benchmarks:

410.bwaves:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
416.gamess:  basepeak = yes 
434.zeusmp:  basepeak = yes 
437.leslie3d:  basepeak = yes 
459.GemsFDTD:  basepeak = yes 
465.tonto:  Same as 410.bwaves 

Benchmarks using both Fortran and C:

435.gromacs:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
436.cactusADM:  basepeak = yes 
454.calculix:  Same as 435.gromacs 
481.wrf:  basepeak = yes 

The flags file that was used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.18.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.18.xml.