Selecting one of the following will take you directly to that section:
Specify the basic level of optimization desired.
The options can be one of the following:
0 Instructs the compiler to not optimize.
1 With -O1, the compiler tries to reduce code size and execution time, without performing any optimizations that take a great deal of compilation time.
2 Optimize even more.
This is the default.
The compiler performs nearly all supported optimizations that
do not involve a space-speed tradeoff. The compiler does not
perform loop unrolling or function inlining when you specify -O2.
As compared to -O1, this option increases both compilation time
and the performance of the generated code.
3 Optimize yet more.
-O3 turns on all optimizations specified by
-O2 and proceed to take a more aggressive approach. The compiler
attempts to generate high-quality code even at the expense of
compile time. This level of optimization may specify optimization
options that are generally beneficial but decisively cause performance
degradations.
s Optimize for size.
-Os enables all -O2 optimizations that do not
typically increase code size. It also performs further optimizations
designed to reduce code size.
If multiple "O" options are used, with or without level numbers, the last such option is the one that is effective. Level 2 is assumed if no value is specified (i.e. "-O". The default is "-O2".
Uses a selection of optimizations in order to maximize performance.
Specifying "-Ofast" is equivalent to -O3 -ipa -OPT:Ofast -fno-math-errno -ffast-math.
These optimization options are generally safe. Floating-point accuracy may
be affected due to the transformation of the computational code. Note the
interprocedural analysis option, -ipa, specifies limitations on how libraries
and object files (.o files) are built.
-apo <path>
Instructs the compiler to automatically transform sequential code into parallel
code. The compiler will only transform blocks of code that will demonstrate a
speed-up to the runtime (i.e. execute faster) on a multiprocessor target.
The default number of threads used at run-time is either the number of processors in the machine or is determined by the value of the OMP_NUM_THREADS environment variable.
-fb_create <path>
Instructs the compiler to generate an instrumented executable program from
the source code under development. The instrumented executable produces
feedback data files at runtime using an example dataset. filename specifies the
name of the feedback data file generated by the instrumented executable.
opencc -O2 -ipa -fb-create fbdata -o foo foo.c
"fbdata" will contain the instrumented feedback data from the instrumented
executable "foo". The default is "-fb-create" is disabled.
-fb_opt <prefix for feedback data files>
Instructs the compiler to perform a feedback directed compilation using the
instrumented feedback data produced by the -fb-create option.
opencc -O2 -ipa -fb-opt fbdata -o foo foo.c
The new executable, foo, will be optimized to execute faster, and will not
include any instrumentation library calls. Note the same optimization flags
specified when creating the instrumented data file with the -fb-create must
be specified when invoking the compiler with the -fb-opt option. Otherwise,
the compiler will emit checksum errors. The default is "-fb-opt" disabled.
Disables the use of SSE2 instructions. Note disabling SSE2 instructions when specifying -m64 will emit a warning message.
Enables the use of 3DNow instructions.
Compiler will generate instructions and schedule them appropriately for the selected processor type. The default value, auto, means to optimize for the platform on which the compiler is running, as determined by reading /proc/cpuinfo. anyx86 means a generic 32-bit x86 processor without SSE2 support.
(For C++ only) -fexceptions enables exception handling and thus generates extra code needed to propagate exceptions. -fno-exceptions disables exception handling. Exception handling is enabled by default.
"-fast-math" instructs the compiler to relax ANSI/ISO or IEEE
rules/specifications for math functions in order to optimize
floating-point computations to improve runtime.
"-fno-fast-math" instructs the compiler to conform to ANSI and
IEEE math rules. This option causes the preprocessor macro
__FAST_MATH__ to be defined.
Note:
"-Ofast" implies "-ffast-math".
"-ffast-math" sets options "-fno-math-errno" and "-OPT:IEEE_arithmetic=2".
"-fno-fast-math" sets options "-fmath-errno" and "-OPT:IEEE arithmetic=1".
Do not set ERRNO after calling math functions that are executed with a single instruction, e.g. sqrt. A program that relies on IEEE exceptions for math error handling may want to use this flag for speed while maintaining IEEE arithmetic compatibility. Note specifying "-Ofast" implies "-fno-math-errno". The default is "-fmath-errno".
Instructs the compiler to invoke inter-procedural analysis. Specifying "-ipa" is equivalent to "-IPA" and "-IPA:" with no suboptions, thus the default settings for the individual IPA suboptions are used.
Instructs the compiler to use 2MB hugepages for bss, data and text segments (i.e. bdt), and/or for heap allocation. Mixed usage of huge and small pages is not supported for bdt, but is supported for heap allocation. The limit option specifies a combined limit on the number of hugepages that may be used by the compiled program. If no limit is set, the number of hugepages that can be used by the program is effectively limited by the system configuration.
The Code Generation option group -CG: controls the optimizations and transformations of the instruction-level code generator.
-CG:cflow=(on|off|0|1): Specifying OFF disables control flow optimization in code generation. The default is ON.
-CG:cmp_peep=(on|off|0|1): Instructs the compiler to perform aggressive load execution peeps on compare operations. Note for 32-bit environments the default is "-CG:cmp_peep=ON". The default is "CG:cmp_peep=OFF".
-CG:compute_to=(on|off|0|1): Instructs the compiler to allow local code motion to take advantage of pipeline optimizations on versions of GH-C (Glasgow Haskell Compiler) and greater. The default is "CG:compute_to=OFF"
-CG:cse_regs=N : When performing common subexpression elimination, the compiler code generator assumes that there are N extra integer registers available (i.e. in excess of the number provided by the processor). N can be positive, negative, or zero. The default is positive infinity. See also -CG:sse_cse_regs=N.
-CG:gcm=(on|off|0|1): "-CG:gcm=OFF" instructs the compiler to disable the instruction level global code motion optimization phase. The default is "-CG:gcm=ON".
-CG:load_exe=N : The parameter N must be a non-negative integer which specifies the threshold for considering a memory load operation into the operand of an arithmetic instruction. If N=0 this subsumption optimization is not performed (or turned off). If the number of times the result of the memory load is used exceeds the value of N then the subsumption optimization is not performed. For example, if n=1 this subsumption is performed only when the result of the memory load has only one use. The default value of N varies with target processor and source language.
-CG:local_sched_alg=(0|1|2): This option selects the basic block instruction scheduling algorithm.
To perform backward scheduling (i.e. where instructions are
scheduled from the bottom to the top of the basic block) select 0.
To perform forward scheduling select 1.
To schedule the instruction twice (i.e. once in the forward
direction and once in the backward direction) and take the
optimal of the two schedules select 2.
The default value for this option is determined by the Open64 compiler
during compilation.
-CG:locs_shallow_depth=(on|off|0|1): ON instructs the compiler to give priority to instructions that have shallow depths in the dependence graph when performing local instruction scheduling to reduce register usage. The default is "-CG:locs_shallow_depth=OFF".
-CG:movnti=N : When writing memory blocks of size larger than N KB ordinary stores will be transformed into non-temporal stores. The default is N=1000.
-CG:p2align=(on|off|0|1): When ON instructs the compiler to align loop heads to 64-byte boundaries. The default is "-CG:p2align=OFF".
-CG:post_local_sched=(on|off|0|1): When ON, enables the local scheduler phase after register allocation. The default is "-CG:post_local_sched=ON".
-CG:prefetch=(on|off|0|1): With "-CG:prefetch=ON", prefetch instructions are generated in the code generator. Note both "-CG:prefetch=OFF" and "-LNO:prefetch=0" disable the generation of prefetch instructions. "-LNO:prefetch=0" only affects loop-nesting optimizations that rely on prefetch. The default is "-CG:prefetch=ON".
-CG:prefer_legacy_regs=(on|off|0|1): When enabled the compiler register allocator is instructed to use the first 8 integer and SSE registers when possible (i.e. %rax-%rbp, %xmm0-%xmm7). Starting with the last assigned register and work upward in most recently assigned fashion where available. Note instructions which use these registers have smaller instruction sizes. For example, the lower 8 registers on x86-64 do not use the rex byte. The default is "-CG:prefer_legacy_regs=OFF".
-CG:ptr_load_use=N: The code generator increases the modeled latency between an instruction that loads a pointer and an instruction that uses the pointer by N cycles. Ordinarily, it is advantageous to load pointers as fast as possible so the dependent memory instructions can begin execution. However, the additional latency will force the instruction scheduler to schedule the load pointer even earlier. Note the load pointer instructions include load-execute instructions which compute pointer results. The default is "-CG:ptr_load_use=4".
-CG:push_pop_int_saved_regs=(on|off|0|1): When ON, the compiler generates push and pop instructions to save integer callee-saved registers at function prologues and epilogues. The push and pop instructions replace mov instructions to and from memory locations based off the stack pointer. The default is "-CG:push_pop_int_saved_regs=OFF". When the specified target is barcelona, default is "-CG:push_pop_int_saved_regs=ON".
-CG:sse_cse_regs=N : When performing common subexpression elimination, instructs the compiler code generator that there are N extra SSE registers available (i.e. in excess of the number provided by the processor). N can be positive, negative, or zero. The default is positive infinity. See also -CG:cse_regs=N.
-CG:use_prefetchnta=(on|off|0|1): When enabled, prefetching is performed on non-temporal data at all levels of the cache hierarchy. Note this option is for data streaming situations when the data will not need to be reused soon. The default is "-CG:use_prefetchnta=OFF".
-CG:unroll_fb_req=(on|off|0|1): The compiler is instructed to override cold code motion to keep the code generator from adding control flow in unrolled loops. The default is "-CG:unroll_fb_req=OFF".
-INLINE:aggressive=(on|off|0|1): Instructs the compiler to be very aggressive when performing inlining. The default is "-INLINE:aggressive=OFF".
The inter-procedural analyzer option group -IPA: controls application of inter-procedural analysis and optimization.
-IPA:callee_limit=N : The compiler is instructed not to allow inlining of functions with a code size larger the limit set by N. The default is "-IPA:callee_limit=500."
-IPA:linear=(on|off|0|1): The compiler is instructed perform linearization of array references. The compiler transforms a multi-dimensional array to a linear array (i.e. single dimensional)which is mapped to the same memory block. The compiler attempts to map formal array parameters to the shape of the actual parameter when inlining Fortran subroutines. This mapping process may not always be successful, therefore when the compiler is unable to map the parameter it linearizes the array reference. Note the compiler will not attempt to inline such callsites due to possible performance problems. The default is "-IPA:linear=OFF".
-IPA:min_hotness=N : The compiler is instructed not to inline a function to a call site (i.e. caller) unless the callee is invoked more than N times. The compiler examines the interprocedural feedback to determine if the threshold set by N is surpassed by a call site to a procedure and then proceeds to inline the procedure if the limit is exceeded. The default is "-IPA:min_hotness=10".
-IPA:plimit=N : The compiler is instructed to halt inlining within a program once the intermediate representation indicates that the code size of the program has surpassed the limit set by N. The default is "-IPA:plimit=2500".
-IPA:pu_reorder=(0|1|2) : The compiler is instructed to examine compilation feedback for invocation patterns to determine the process of reordering the layout of program procedures in order to minimize instruction cache misses. Possible settings are:
0 Suppress reordering of program procedures.
1 Use the frequent occurrence of procedure invocation to determine reordering.
2 Use the relationship between caller and callee to determine reordering.
The default is "-IPA:pu_reorder=1" for C++ programs and "-IPA:pu_reorder=0" for programs not written using C++.
-IPA:space=N : The compiler is instructed to perform inlining until the program code size expands by percentage specified by N. Therefore, to limit program code size growth to ~20%, due to inlining, specify "-IPA:space=20". The default is "-IPA:space=infinity".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:blocking=(on|off|0|1): Instructs the compiler to perform cache blocking transformation. The default is "-LNO:blocking=ON".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:full_unroll,fu=N : The compiler is instructed to fully unroll loops after examining the loop, within the loop nest optimizer, to determine if the loop can be fully unrolled in N or less iterations. Argument "fu=N" specifies the maximum number of unrolls that can be performed to fully unroll the loop. Note that setting N=0 suppresses full unrolling of loops inside the loop nest optimizer. The default is "-LNO:full_unroll=5".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:full_unroll_size=N : The compiler is instructed to fully unroll loops after examining the loop, within the loop nest optimizer, to determine if the unrolled loop size is less than or epual to N. Specify N as an integer between 0 and 10000. Note limits set by -LNO:full_unroll,fu=N and -LNO:full_unroll_size=N must be satisfied before the loop is fully unrolled. The default is "-LNO:full_unroll_size=2000."
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:full_unroll_outer=(on|off|0|1) : The compiler is instructed to fully unroll loops that do not incorporate inner loops or is incorporated by an outer loop. Note limits set by both "-LNO:full_unroll,fu=N" and "-LNO:full_unroll_size=N" must be satisfied before the loop is fully unrolled. The default is "-LNO:full_unroll_outer=OFF".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:fission=N : Instsructs the compiler to perform loop fission. This option can be
set to:
0 Suppress loop fission.
1 The compiler performs normal loop fission as necessary.
2 The compiler performs loop fission prior to loop fusion.
Note loop fusion is usually applied before loop fission, therefore
if "-LNO:fission=ON" and "-LNO:fusion=ON" when the compiler is
invoked a reverse effect may be induced. To counter this effect
specify "-LNO:fission=2" to instruct the compiler to perform loop
fission prior to loop fusion. The default is "-LNO:fission=0".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:fusion=N : The compiler is instructed to perform loop fusion. The flag can be
set to:
0 Suppress loop fusion.
1 The compiler performs traditional loop fusion.
2 The compiler performs aggressive loop fusion.
The default is "-LNO:fusion=0".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:ignore_feedback=(on|off|0|1) : The compiler is instructed to ignore feedback information generated by loop annotations during loop nest optimizations. The default is "-LNO:ignore_feedback=OFF".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:interchange=(on|off|0|1) : The compiler is instructed to perform loop interchange optimizations. The default is "-LNO:interchange=ON".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:minvariant,minvar=(on|off|0|1): The compiler is instructed to move loop-invariant expressions outside of loops. The default is "-LNO:minvariant,minvar=ON".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:opt=(0|1) : Instructs the compiler at which level to perform loop nest optimizations.
The flag can be set to:
0 The compiler is restricted to suppress nearly all loop nest optimizations.
1 The compiler performs full loop nest optimizations.
The default is "-LNO:opt=1"
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:outer_unroll_max,ou_max=N : Instructs the compiler to perform the unrolling of outer loops in a loop nest. The unrolling of the outer loop is limited to N unrolls per outer loop. The default is "-LNO:outer_unroll_max,ou_max=5".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:ou_prod_max=N : The compiler is instructed to unroll several outer loops of a given loop nest. The product is limited to N outer loops. N is a positive number. The default is "-LNO:ou_prod_max=16".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:prefetch_ahead=N : The compiler is instructed to prefetch ahead N cache line(s). The default is "-LNO:prefetch_ahead=2".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:prefetch=(0|1|2|3) : Instructs the compiler to perform prefetching optimizations at a
specified level. The flag can be set to:
0 Instructs the compiler to suppress prefetching.
1 The compiler is instructed to allow prefetching only for
arrays that are always referenced in every loop iteration.
2 The compiler is instructed to implement prefetching
disregarding the restrictions in the above setting.
3 The compiler is instructed to implement aggressive prefetching.
The default is "-LNO:prefetch=2".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:pf2=(on|off|0|1): The compiler is instructed to turn ON/OFF prefetching for specified cache levels. "pf2" specifies the level 2 cache.
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:sclrze=(on|off): The compiler is instructed to substitute a scalar variable for an array. The default is "-LNO:sclrze=ON".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:simd=(0|1|2) : The compiler is instructed to use single instruction multiple data
(SIMD) instructions, supported by the target processor, when vectorizing
the inner loop. The flag can be set to:
0 The compiler is instructed to suppress vectorization.
1 The compiler is instructed to vectorize only if there is
no performance degradation due to sub-optimal alignment
and does not induce floating-point operation inaccuracies.
2 Instructs the compiler to aggressively vectorize with no
constraints in place.
The default is "LNO:simd=1".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:trip_count,trip_count_assumed_when_unknown=N : The compiler is instructed to use the value in N for a presumed loop trip-count if at compile time a loop trip-count is not known. The loop trip-count, N, is used for loop transformations and prefetch optimizations and must be a positive integer. The default is "-LNO:trip_count_assumed_when_unknown,trip_count=1000".
This option group commands the compiler loop nest optimizer to perform nested loop analysis and transformations. Note an optimization level of "-O3" or higher must be specified in order to enable the "-LNO:" options. To verify the LNO options that were invoked during compilation use the option "-LIST:all_options=ON".
-LNO:vintr=(0|1|2) : The compiler is instructed to use vector intrinsic functions when
vectorizing loops. Where a vector function is called once to compute
a math intrinsic for the entire vector. The flag can be set to:
0 Instructs the compiler to suppress vector intrinsic function optimizations.
1 The compiler is instructed to perform normal vector intrinsic function optimizations.
2 The compiler is instructed to aggressively implement all vector intrinsic function optimizations. Note specifying
this option could cause some of the vector intrinsic functions to produce floating-point accuracy errors.
The default is "-LNO:vintr=1".
Generate code for a 32-bit environment. The 32-bit environment sets int, long and pointer to 32 bits and generates code that runs on any i386 system. The compiler generates x86 or IA32 32-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target platform specified is 64-bit, otherwise the default is 32-bit.
Generate code for a 64-bit environment. The 64-bit environment sets int to 32 bits and long and pointer to 64 bits and generates code for AMD's x86-64 architecture. The compiler generates AMD64, INTEL64, x86-64 64-bit ABI. The default on a 32-bit host is 32-bit ABI. The default on a 64-bit host is 64-bit ABI if the target platform specified is 64-bit, otherwise the default is 32-bit.
Find math functions in AMD's ACML library.
The -OPT: The "-OPT:" option group controls various optimizations. The "-OPT:" options supersede the defaults that are based on the main optimization level.
-OPT:alias=<model>
Identify which pointer aliasing model to use. The compiler will
make assumptions during compilation when one or more of the
following <model> is specified:
typed
Assumes that two pointers of different types will not
point to the same location in memory (i.e. the code
adheres to the ANSI/ISO C standards). Note when
specifying "-OPT:Ofast" turns this option ON.
restrict
Assumes that distinct pointers are pointing to distinct
non-overlapping objects. The default is that this optimization
is disabled.
disjoint
Assumes that any two pointer expressions are pointing
to distinct non-overlapping objects. This default is that this
optimization is disabled.
no_f90_pointer_alias
Assumes that any two different Fortran 90 pointers are
pointing to distinct non-overlapping objects. The default
is that this optimization is disabled.
-OPT:div_split=(on|off|0|1)
Instruct the compiler to transform x/y into x*(recip(y)). Flags
-OPT:Ofast or -OPT:IEEE_arithmetic=3 will enable this optimization.
Note this transform generates fairly accurate code. The default
is "-OPT:div_split=OFF".
-OPT:fast_complex=(on|off|0|1)
Specifies fast calculations for values declared to be of the type
complex. Fast algorithms are used for complex absolute value
and complex division. The algorithm will overflow for an
operand (e.g., the divisor in the case of division) that has an
absolute value that is larger than the square root of the largest
representable floating-point number. Also, the algorithm will
underflow for a value that is smaller than the square root of the
smallest representable floating point number. Note, specifying
"-OPT:roundoff=3" will also invoked "-OPT:fast_complex=ON".
The default is "-OPT:fast_complex=OFF".
-OPT:fold_unsigned_relops=(on|off|0|1)
Instructs the compiler to fold unsigned relational operators
that will transform possible integer overflow. The default is
"-OPT:fold_unsigned_relops=ON".
-OPT:goto=(on|off|0|1)
Transforms GOTO into higher level structures e.g., FOR loops. Note if
"-O2" is specified "-OPT:goto=ON". The default is "-OPT:goto=OFF".
-OPT:IEEE_arithmetic,IEEE_arith,IEEE_a=(1|2|3)
This flag regulates the level of conformance to ANSI/IEEE 754-
1985 floating point roundoff and overflow. The levels of conformance:
1 Adhere to IEEE 754 accuracy. Specifying "-O0", "-O1",
and "-O2" will set "-OPT:IEEE_arithmetic=1".
2 Produces inexact results that do not conform to
IEEE 754 may be calculated. Specifying "-O3" will set
"-OPT:IEEE_arithmetic=2".
3 All valid mathematical transformations are allowed.
-OPT:IEEE_NaN_Inf=(on|off|0|1)
-OPT:IEEE_NaN_inf=ON instructs the compiler to conform to ANSI/IEEE 754-1985 for all
operations which produce a NaN or infinity result. Note NaN and
infinity are typically handled as special cases in floating-point representations
of real numbers and are defined by the IEEE 754 Standards for Binary Floating-point
Arithmetic. The default is "-OPT:IEEE_NaN_Inf=ON".
-OPT:IEEE_NaN_inf=OFF instructs the compiler to calculate various operations that do not
produce IEEE-754 results. For example, x/x is set to the value 1
without performing a divide operation and x=x is set to TRUE with
out executing a test operation. "-OPT:IEEE_NaN_inf=OFF"
specifies multiple optimizations that increase performance.
-OPT:keep_ext=(on|off|0|1)
Instructs the compiler
to preserve external symbolic information. The default is "-OPT:keep_ext=OFF".
-OPT:malloc_algorithm,malloc_alg=(0|1)
To improve runtime speed the compiler will select an optimal malloc
algorithm. To enable the selected algorithm, setup code is included
in the C/C++ and Fortran main function.
The two parameters, M_MMAP_MAX and M_TRIM_THRESHOLD, are described below.
Function: int mallopt (int param, int value) When calling mallopt, the param argument specifies the parameter to be set, and value the new value to be set. Possible choices for param, as defined in malloc.h, are:
-OPT:Ofast
Maximizes performance for a given platform using the selected optimizations.
"-OPT:Ofast" specifies four optimizations; "-OPT:ro=2",
"-OPT:Olimit=0", "-OPT:div_split=ON", and "-OPT:alias=typed".
Note the specified optimizations are ordinarily safe but floating
point accuracy due to transformations may be diminished.
-OPT:Olimit=N
Controls the size of procedures to be optimized. Procedures above
the specified cutoff limit, N, are not optimized. N=0 means
"infinite Olimit", which causes all procedures to be optimized
with no consideration regarding compilation times. Note if
"-OPT:Ofast" is enabled then "-OPT:Olimit=0" or when "-O3" is
enabled "-OPT:Olimit=9000". The default is "-OPT:Olimit=6000".
-OPT:roundoff,ro=(0|1|2|3)
"-OPT:roundoff" specifies acceptable levels of divergence for both
accuracy and overflow/underflow behavior of floating-point results
relative to the source language rules. The roundoff value is
in the range 0-3 with each value described as follows:
0 Do no transformations which could affect floating-point
results. The default for optimization levels "-O0", "-O1",
and "-O2".
1 Allow all transformations which have a limited affect
on floating-point results. For roundoff, limited is defined
as only the last bit or two of the mantissa is affected.
For overflow or underflow, limited is defined as
intermediate results of the transformed calculation may
overflow or underflow within a factor of two of where
the original expression may have overflowed or underflowed.
Note that effects may be less limited when
compounded by multiple transformations. This is the
default when "-O3" is specified.
2 Specifies transformations with extensive effects on
floating-point results. For example, allow associative
rearrangement (i.e. even across loop iterations) and the
distribution of multiplication over addition or
subtraction. Do not specify transformations known to
cause: a. cumulative roundoff errors, or b. overflow/underflow
of operands in a large range of valid floating-point values.
This is the default when specifying "-OPT:Ofast".
3 Specify any mathematically valid transformation of
floating-point expressions. For example, floating point
induction variables in loops are permitted (even if
known to cause cumulative roundoff errors). Also
permitted are fast algorithms for complex absolute
value and divide (which will overflow/underflow for
operands beyond the square root of the representable extremes).
-OPT:rsqrt=(0|1|2)
Instructs the compiler to use the reciprocal square root instruction
when calculating the square root. This transformation may vary
the accuracy slightly.
0 Restrain from using the reciprocal square root instruction.
1 Use the reciprocal square root instruction followed by
operations that will improve the accuracy of the results.
2 Use the reciprocal square root instruction without improving
the result accuracy.
Note "-OPT:rsqrt=1" if "-OPT:roudoff=2" or "-OPT:roundoff=3".
The default is "-OPT:rsqrt=0".
-OPT:treeheight=(on|off|0|1)
Instructs the compiler to perform a global reassociation of expressions
which reduces the tree height of the expressions. The reassociation
process determines the optimum order of combining terms
in a sum so as to produce loop invariant subcomputations
or to refine common subexpressions amoung several essential computations.
The default is "-OPT:treeheight=OFF".
-OPT:unroll_level=(1|2)
Controls the level at which
the compiler will perform unrolling optimizations. When "-OPT:unroll_level=2"
the compiler is instructed to aggressively unroll loops in the
presence of control flow. The default is "-OPT:unroll_level=1".
-OPT:unroll_size=N
Instructs the compiler to limit the number of instructions produced
when unrolling inner loops. When N=0 the ceiling is disregarded.
Note by specifying "-O3" sets "-OPT:unroll_size=128". The default
is "-OPT:unroll_size=40".
-OPT:unroll_times_max=N
Instructs the compiler to limit the unrolling of inner loops to the
value specified by N. The default is "-OPT:unroll_times_max=4".
-L<library directory> -lsmartheap ,
when used as an EXTRA_CXXLIB variable,
results in linking with MicroQuill's SmartHeap 8 (32-bit) library
for Linux. This is a library that optimizes calls to new, delete, malloc and free.
-static
On systems that support dynamic linking, this prevents linking with shared
libraries. On other systems, this option has no effect.
This group of options controls the affect the global optimizer has on the program. "-WOPT:" only influences global optimizations specified by "-O2" or above.
-WOPT:aggstr=N
-WOPT:aggstr regulates the aggressiveness of the compilers
scalar optimizer when performing strength reduction optimizations.
Strength reduction is the substitution of induction expressions
within a loop with temporaries that are incremented together
with the loop variable. The value N specifies the maximum
number of induction expressions being replaced. Select positive
integers only for variable N. Setting N=0 tells the scalar optimizer
to use strength reduction for non-trivial induction expressions.
Note specifying very aggressive strength reductions may prompt
additional temporaries increasing register pressure and resulting
in excessive register spills that decrease performance. The default
is "-WOPT:aggstr=11".
-WOPT:if_conv=(0|1|2):
"-WOPT:if_conv" instructs the compiler to transform simple IF
statements to conditional move instructions. "-WOPT:if_conv" has
three settings:
0 Disables this optimization.
1 Specifies conservative IF statement transformations.
The context surrounding the IF statement is used in
the transformation decision.
2 Use aggressive IF statement transformations. Perform
the IF statement transformation regardless of the surrounding
context.
The default is "-WOPT:if_conv=1".
-WOPT:mem_opnds=(on|off|0|1)
The compilers scalar optimizer is instructed to use automated reasoning
to protect all memory operands of arithmetic operations.
The process attempts to incorporate memory loads as part of the
operands of arithmetic operations (e.g., the compiler tries to combine
a memory load and an arithmetic instruction into one instruction).
The default is "WOPT:mem_opnds=OFF".
-WOPT:retype_expr=(on|off|0|1)
Instructs the compiler to use 32-bit arithmetic, when ever
possible, for calculating 64-bit addresses. The default is
"-WOPT:retype_expr=OFF".
-WOPT:unroll=(0|1|2) : Specifing "WOPT:unroll" helps regulate the compiler's scalar optimizer
when unrolling of innermost loops. The available settings
are:
0 Innermost loop unrolling is suppressed.
1 Instructs the compilers scalar optimizer to unroll the
innermost loops which contain IF statements. Selecting
this setting compliments the loop unrolling performed
in the code generator.
2 Instructs the compiler's scalar optimized to unroll the
innermost loops which contain straight line code plus
the loops containing IF statements. Selecting this setting
duplicates the unrolling performed in the code generator
(i.e. unrolling straight line code in the body of
a loop).
Note "-WOPT:unroll" and the unrolling options in the "-OPT" group
are mutually exclusive. The default is "-WOPT:unroll=1".
Global register allocation (GRA) is the process of multiplexing a large number of target program variables onto a small number of CPU registers. The code generator implements global register allocation when certain optimization levels are specified.
-GRA:optimize_boundary=(on|off|0|1)
Instructs the compiler to permit the register allocator to assign the
same register to different variables in the same basic-block. The
default is "-GRA:optimize_boundary=OFF".
-GRA:prioritize_by_density=(on|off|0|1)
Instructs the compilers GPA to prioritize register assignments to
variables based on the variables reference density and noton reference
count. The default is "-GRA:prioritize_by_density=OFF".
-GRA:unspill=(on|off|0|1)
The compiler is instructed to
mitigate existing and suboptimal boundry conditions between global
register allocation and local register allocation by unspilling register
candidates which were really available at those boundary conditions. The
default is "-GRA:unspill=OFF".
Options in the -LANG: group can be used to control the set of features that are supported. For example, to compile code that does not conform with the standard in one way or another. Note it may not always be possible, however, to link together object files, some of which have been compiled with a feature enabled and others with it disabled.
-LANG:copyinout=(on|off)
If an array section is passed as an argument in a call, the compiler
is instructed to copy the array section into a temporary array that
will be passed as the argument in the call. -LANG:copyinout
optimizes the accessing of array arguments by improving argument
locality. Note the flag helps regulate the aggressiveness of this
optimization and is mainly suited to Fortran code. When specifying
global optimization -O2 or higher -LANG:copyinout=ON. The
default is "-LANG:copyinout=OFF".
These -TENV: options control the target environment assumed and/or produced by the compiler.
-TENV:frame_pointer=(on|off)
Setting this option to ON tells the compiler to use the frame pointer
register to address local variables in the function stack frame. Generally,
if the compiler determines that the stack pointer is fixed it
will use the stack pointer to address local variables throughout the
function invocation in place of the frame pointer. This frees up the
frame pointer for other purposes.
The default is ON for C/C++ and OFF for Fortran. This flag defaults
to ON for C/C++ because the exception handling mechanism
relies on the frame pointer register being used to address local variables.
This flag can be turned OFF for C/C++ programs that do
not generate exceptions.
CFP2006:
If -funderscoring is in effect, and the original Fortran external identifier contained an underscore, -fsecond-underscore appends a second underscore to the one added by -funderscoring. -fno-second-underscore does not append a second underscore. The default is both -funderscoring and -fsecond-underscore, the same defaults as g77 uses. -fno-second-underscore corresponds to the default policies of PGI Fortran and Intel Fortran.
Invoke the Open64 C compiler.
Also used to invoke linker for C programs.
Invoke the Open64 C++ compiler.
Also used to invoke linker for C++ programs.
Invoke the Open64 Fortran 77, 90 and 95 compilers.
Also used to invoke linker for Fortran programs and
for mixed C / Fortran. openf90 and openf95 are synonymous.
-IPA:max_jobs=N : The compiler is instructed to limit the number of compilations running
at once to N. After interprocedural analysis is performed the
compiler is invoked with -IPA:max_jobs set to the maximum level
of parallelism. N can be set to:
0 The maximum level of parallelism is limited to the greatest number of CPUs (or processor
sockets), processor cores, or hyperthreading units in the system.
1 Suppress parallelization during compilation.
>=2 Sets the desired level of parallelism.
The default is "-IPA:max_jobs=1".