SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
IBM
eServer 325, 2.0 GHz Opteron, gcc, 64-bit SuSE SLES8 Linux
SPECint_rate2000 = 27.5  
SPECint_rate_base2000 = 24.9  
SPEC license # 11 Tested by: IBM, Research Triangle Park, NC Test date: Sep-2003 Hardware Avail: Oct-2003 Software Avail: Jul-2003
Graph Scale Benchmark Base
Copies		 Base
Runtime		 Base
Ratio		 Copies Runtime Ratio
164.gzip base result bar (23.8)
164.gzip peak result bar (24.8)		 164.gzip 2 137    23.8   2 131    24.8  
175.vpr base result bar (20.9)
175.vpr peak result bar (22.3)		 175.vpr 2 156    20.9   2 145    22.3  
176.gcc base result bar (31.6)
176.gcc peak result bar (31.9)		 176.gcc 2 80.7  31.6   2 79.9  31.9  
181.mcf base result bar (9.34)
181.mcf peak result bar (13.8)		 181.mcf 2 447    9.34  2 303    13.8  
186.crafty base result bar (40.3)
186.crafty peak result bar (42.2)		 186.crafty 2 57.6  40.3   2 55.0  42.2  
197.parser base result bar (23.0)
197.parser peak result bar (24.9)		 197.parser 2 182    23.0   2 168    24.9  
252.eon base result bar (39.2)
252.eon peak result bar (42.5)		 252.eon 2 77.0  39.2   2 71.0  42.5  
253.perlbmk base result bar (30.0)
253.perlbmk peak result bar (30.0)		 253.perlbmk 2 139    30.0   2 139    30.0  
254.gap base result bar (24.4)
254.gap peak result bar (24.4)		 254.gap 2 104    24.4   2 104    24.4  
255.vortex base result bar (29.6)
255.vortex peak result bar (32.8)		 255.vortex 2 149    29.6   2 134    32.8  
256.bzip2 base result bar (24.4)
256.bzip2 peak result bar (24.5)		 256.bzip2 2 143    24.4   2 142    24.5  
300.twolf base result bar (19.9)
300.twolf peak result bar (29.3)		 300.twolf 2 349    19.9   2 237    29.3  
  SPECint_rate_base2000 24.9    
  SPECint_rate2000 27.5  

Hardware
Hardware Vendor: IBM
Model Name: eServer 325, 2.0 GHz Opteron, gcc, 64-bit SuSE SLES8 Linux
CPU: AMD Opteron 246
CPU MHz: 2000
FPU: Integrated
CPU(s) enabled: 2 cores, 2 chips, 1 core/chip
CPU(s) orderable: 1,2
Parallel: No
Primary Cache: 64KBI + 64KBD on chip
Secondary Cache: 1024KB(I+D) on chip
L3 Cache: N/A
Other Cache: N/A
Memory: 2x1024MB + 4x512MB PC2700 Reg ECC DDR SDRAM CL2.5
Disk Subsystem: 1 x 40GB IDE
Other Hardware: None
Software
Operating System: SuSE Linux 8.0 SLES 64 bit Kernel 2.4.19-249 (SP2)
Compiler: SuSE gcc33 optional compiler (from SLES8 SP2)
File System: Linux/reiserfs
System State: Multi-user SuSE Run level 5
Notes / Tuning Information 
Tested by IBM Corporation
  gcc is the SuSE optional gcc33 package C compiler (from SLES8 SP2)
  +FDO: PASS1=-fprofile-arcs PASS2=-fbranch-probabilities
  ONESTEP is used for all base runs
  Portability:      PORTABILITY=-DSPEC_CPU2000_LP64 is applied to all benchmarks
                    (affecting only 176.gcc, 252.eon, 253.perlbmk, 254.gap, and 
                    255.vortex)
    176.gcc:        Approved src.alt is used
    186.crafty:     CPORTABILITY=-DLINUX_i386
    252.eon:        CXXPORTABILITY=-DHAS_ERRLIST -DFMAX_IS_DOUBLE
                    Approved src.alt is used
    253.perlbmk:    CPORTABILITY=-DSPEC_CPU2000_LINUX_I386 -DSPEC_CPU2000_NEED_BOOL
                                 -DSPEC_CPU2000_GLIBC22
    254.gap:        CPORTABILITY=-DSYS_IS_USG -DSYS_HAS_IOCTL_PROTO
                                 -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO
                                 -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO
  Baseline C:       gcc -O3 -funroll-all-loops +FD0 
  Baseline C++:     g++ -O3 -funroll-all-loops +FD0
  Peak tuning:
    164.gzip:       -O3 -funroll-all-loops -finline-limit=900 -freduce-all-givs +FDO
    175.vpr:        -O3 -funroll-loops -finline-limit=1000 +FDO
    176.gcc:        -O3 -funroll-all-loops -finline-limit=900 +FDO
    181.mcf:        -O3 -funroll-all-loops -m32 +FDO
                    ONESTEP=yes
    186.crafty:     -O3 -funroll-loops -fprefetch-loop-arrays
    197.parser:     -O3 -funroll-all-loops -m32 +FDO
                    ONESTEP=yes
    252.eon:        -O3 -funroll-all-loops -ffast-math -finline-limit=3000 +FDO
    253.perlbmk:    -O3 -funroll-all-loops -finline-limit=1800 +FDO
    254.gap:        basepeak=true
    255.vortex:     -O3 -funroll-all-loops -finline-limit=1000 +FDO
    256.bzip2:      -O3 -funroll-all-loops -freduce-all-givs -finline-limit=2700 +FDO
    300.twolf:      -O3 -funroll-all-loops -static -finline-limit=2000 -m32 +FDO
  Set the following BIOS parameters:
    DRAM Interleave = AUTO
    Node Interleave = Disabled
    ACPI SRAT       = Enabled

For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 25-Sep-2003

Generated on Mon Mar 28 11:10:02 2005 by SPEC CPU2000 HTML formatter v1.01