# Invocation command line: # /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/bin/runspec --rebuild -c omp-intel --reportable openmp --output_format raw,pdf,txt # output_root was not used for this run ############################################################################ # This is a sample OpenACC config file. It was tested with: # # Compiler name/version: PGI 13.9 # Operating system version: 64-bit Linux # CPU: x86_64 Based Systems # Accelerator: NVIDIA Tesla M2090 # Driver: NVIDIA UNIX x86_64 Kernel Module 319.49 # # If your platform uses different versions, different # hardware or operates in a different mode (for # example, 32- vs. 64-bit mode), there is the possibiliy # that this configuration file may not work as-is. # # Note that issues with compilation should be directed # to the compiler vendor. Information about SPEC techncial # support can be found in the techsupport document in the # Docs directory of your benchmark installation. # # Also note that this is a sample configuration. It # is expected to work for the environment in which # it was tested; it is not guaranteed that this is # the config file that will provide the best performance. # #################################################################### # Tester information #################################################################### license_num = 0000 prepared_by = Your Name (Your_email@your_co.com) tester = Your Company test_sponsor = Sponsor Company ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" # the rest are default values ext = intel output_format = asc teeout = yes teerunout = yes tune = base #################################################################### # Power and temperature meter configuration #################################################################### power = no power_analyzer = 192.168.1.112:8888 temp_meter = 192.168.1.112:8889 mean_anyway = 1 voltage_range = auto idle_current_range = auto current_range = auto #output_root = /local/home//SPECACCEL #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_avail = Jan-9999 hw_cpu_name = CPU Model Name hw_cpu_mhz = 9999 hw_fpu = Integrated hw_nchips = 9999 hw_ncores = 9999 hw_ncoresperchip = 9999 hw_nthreadspercore = 9999 hw_ncpuorder = 1 to 9999 chips hw_pcache = 9999 MB I + 9999 MB D on chip per chip hw_scache = 9999 MB I+D on chip per chip hw_tcache = 9999 MB I+D off chip per chip hw_ocache = None hw_vendor = Vendor Name hw_model = Model Name hw_disk = 99x SCSI, 999 GB, 999 RPM hw_memory000 = 9999 GB (9999x 1GB, PC3200 CL3 DDR) hw_other = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Tesla M2090 hw_accel_vendor = NVIDIA hw_accel_name = Tesla M2090 hw_accel_type = GPU hw_accel_connect = PCIe hw_accel_ecc = Yes hw_accel_desc = #################################################################### # Software information #################################################################### openacc=default=default=default: sw_avail = Sep-2013 sw_compiler = PGI Accelerator Server Complete, Release 13.9 sw_other = sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 319.49 openmp=default=default: CC = icc CXX = icpc FC = ifort openmp=base=default=default: OPTIMIZE = -O3 -qopenmp -qopenmp-offload=host -xHost PORTABILITY = -DSPEC_USE_INNER_SIMD 550.pmd=default=default=default: FPORTABILITY = -80 559.pmniGhost=default=default=default: FPORTABILITY = -nofor-main # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 5 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2680 v3 hw_disk = 5.3P add more disk info here hw_memory001 = 251.236 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 2 prepared_by = lijunj (is never output, only tags rawfile) sw_file = lustre sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.26.1.el7.x86_64 sw_state = Run level 5 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = intel17_accel.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 9999 hw_fpu = Integrated hw_ncpuorder = 1 to 9999 chips hw_pcache = 9999 MB I + 9999 MB D on chip per chip hw_scache = 9999 MB I+D on chip per chip hw_tcache = 9999 MB I+D off chip per chip hw_ocache = None hw_disk = 5.3P add more disk info here hw_other = None hw_accel_model = Tesla M2090 hw_accel_vendor = NVIDIA hw_accel_name = Tesla M2090 hw_accel_type = GPU hw_accel_connect = PCIe hw_accel_ecc = Yes sw_file = lustre sw_state = Run level 5 (add definition here) sw_peak_ptrsize = Not Applicable test_sponsor = Sponsor Company license_num = 0000 tester = Your Company hw_avail = Jan-9999 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Vendor Name hw_model = Model Name hw_nthreadspercore = 9999 hw_ncoresperchip = 9999 hw_ncores = 9999 hw_nchips = 2 hw_memory000 = 9999 GB (9999x 1GB, PC3200 CL3 DDR) hw_memory001 = 251.236 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 5 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = intel17_accel.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1,2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2680 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2680 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = None sw_compiler = PGI Professional Edition, Release 17.3 sw_file = Lustre 2.5 (DDN SFA12K) over 10Gb ethernet sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = N/A hw_accel_desc000 = Intel Xeon E5-2680 v3 @2.5~3.3GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Lenovo hw_model = Lenovo NeXtScale nx360 M5 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo on, Hyper-threading off. hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-RB0-10, ECC) sw_os001 = Red Hat Enterprise Linux Server release 7.3 sw_os002 = (Maipo) sw_os003 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 3 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = intel17_accel.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1,2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2680 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2680 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = None sw_compiler = PGI Professional Edition, Release 17.3 sw_file = Lustre 2.5 (DDN SFA12K) over 10Gb ethernet sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = N/A hw_accel_desc000 = Intel Xeon E5-2680 v3 @2.5~3.3GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Lenovo hw_model = Lenovo NeXtScale nx360 M5 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo on, Hyper-threading off. hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-RB0-10, ECC) sw_os001 = Red Hat Enterprise Linux Server release 7.3 sw_os002 = (Maipo) sw_os003 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 3 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = intel17_accel.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1,2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2680 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2680 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over 10Gb ethernet sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = N/A hw_accel_desc000 = Intel Xeon E5-2680 v3 @2.5~3.3GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Lenovo hw_model = Lenovo NeXtScale nx360 M5 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo on, Hyper-threading off. hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-RB0-10, ECC) sw_compiler000 = Intel Parallel Studio XE 2017 for Linux Version sw_compiler001 = 17.0.3.191 Build 20170404 sw_os001 = Red Hat Enterprise Linux Server release 7.3 sw_os002 = (Maipo) sw_os003 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 3 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = intel17_accel.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1,2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2680 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2680 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over 10Gb ethernet sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = N/A hw_accel_desc000 = Intel Xeon E5-2680 v3 @2.5~3.3GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Apr-2013 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Lenovo hw_model = Lenovo NeXtScale nx360 M5 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo on, Hyper-threading off. hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-RB0-10, ECC) sw_compiler000 = Intel Parallel Studio XE 2017 for Linux sw_compiler001 = Version 17.0.3.191 Build 20170404 sw_os001 = Red Hat Enterprise Linux Server release 7.3 sw_os002 = (Maipo) sw_os003 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 3 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = intel17_accel.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1,2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2680 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2680 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over 10Gb ethernet sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = N/A hw_accel_desc000 = Intel Xeon E5-2680 v3 @2.5~3.3GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Feb-2017 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Lenovo hw_model = Lenovo NeXtScale nx360 M5 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology on, hw_cpu_char001 = Hyper-threading off. hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-RB0-10, ECC) sw_compiler000 = Intel Parallel Studio XE 2017 for Linux sw_compiler001 = Version 17.0.3.191 Build 20170404 sw_os001 = Red Hat Enterprise Linux Server release 7.3 sw_os002 = (Maipo) sw_os003 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 3 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = intel17_accel.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1,2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2680 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2680 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over 10Gb ethernet sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2680 v3 @2.5~3.3GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Feb-2017 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Lenovo hw_model = Lenovo NeXtScale nx360 M5 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology on, hw_cpu_char001 = Hyper-threading off. hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-RB0-10, ECC) sw_compiler000 = Intel Parallel Studio XE 2017 for Linux sw_compiler001 = Version 17.0.3.191 Build 20170404 sw_os001 = Red Hat Enterprise Linux Server release 7.3 sw_os002 = (Maipo) sw_os003 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 3 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/Intel-icc17.0-linux64.20170830.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1-2 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_disk = None hw_other = None hw_accel_model = Intel Xeon E5-2680 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon E5-2680 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = None sw_file = Lustre 2.5 (DDN SFA12K) over 10Gb ethernet sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None hw_accel_desc000 = Intel Xeon E5-2680 v3 @2.5~3.3GHz test_sponsor = Indiana University license_num = 3440A tester = Indiana University hw_avail = Sep-2014 sw_avail = Mar-2017 prepared_by = lijunj (is never output, only tags rawfile) hw_vendor = Lenovo hw_model = Lenovo NeXtScale nx360 M5 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology on, hw_cpu_char001 = Hyper-threading off. hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) sw_compiler000 = Intel Parallel Studio XE 2017 for Linux sw_compiler001 = Version 17.0.3.191 Build 20170404 sw_os001 = Red Hat Enterprise Linux Server release 7.3 sw_os002 = (Maipo) sw_os003 = 3.10.0-514.26.1.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on c13 Thu Aug 10 22:19:47 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 12 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_100 = cache size : 30720 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 263439912 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = os-release: notes_plat_sysinfo_145 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_150 = VERSION="7.3 (Maipo)" notes_plat_sysinfo_155 = ID="rhel" notes_plat_sysinfo_160 = ID_LIKE="fedora" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.3 (Maipo)" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.3:GA:server" notes_plat_sysinfo_185 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.3:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux c13 3.10.0-514.26.1.el7.x86_64 #1 SMP Tue Jun 20 01:16:02 EDT 2017 notes_plat_sysinfo_215 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 3 Aug 1 19:29 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /N/dc2/projects/hpc/lijunj/SPEC/accel-1.2-run/carbonate notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted notes_plat_sysinfo_245 = on notes_plat_sysinfo_250 = 10.10.0.171@o2ib:10.10.0.172@o2ib:/dc2 lustre 5.3P 5.0P 239T 96% /N/dc2 notes_plat_sysinfo_255 = Additional information from dmidecode: notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_270 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_275 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_280 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_285 = notes_plat_sysinfo_290 = notes_plat_sysinfo_295 = (End of data from sysinfo program)