# Invocation command line: # /tmp/spec-accel/bin/runspec --config=/tmp/spec-accel/config/Taurus2-acc-nvidia-opt1.cfg --platform NVIDIA --device 0 --tune=base --reportable --flagsurl=file://home/s1428123/run-spec-accel/pgi2014_flags_edited.xml openacc # output_root was not used for this run ############################################################################ # This is a sample OpenACC config file. It was tested with: # # Compiler name/version: PGI 15.5 # Operating system version: 64-bit Linux # CPU: x86_64 Based Systems # Accelerator: NVIDIA Tesla K80 # Driver: NVIDIA UNIX x86_64 Kernel Module 346.46 # # If your platform uses different versions, different # hardware or operates in a different mode (for # example, 32- vs. 64-bit mode), there is the possibiliy # that this configuration file may not work as-is. # # Note that issues with compilation should be directed # to the compiler vendor. Information about SPEC techncial # support can be found in the techsupport document in the # Docs directory of your benchmark installation. # # Also note that this is a sample configuration. It # is expected to work for the environment in which # it was tested; it is not guaranteed that this is # the config file that will provide the best performance. # #################################################################### # Tester information #################################################################### license_num =37A prepared_by = tester = Technische Universitaet Dresden test_sponsor = Technische Universitaet Dresden ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" # the rest are default values ext = pgi155 output_format = asc,pdf,raw,txt,config teeout = yes teerunout = yes tune = base #output_root = /local/home//SPECACCEL #################################################################### # HOST Hardware information #################################################################### default=default=default=default: # System Description hw_model = Bull R400 hw_nthreadspercore = 1 hw_memory = 64 GB (8 x 8 GB 2Rx8 PC4-2133R-10, ECC) hw_disk = 62 GB SSD hw_vendor = Bull hw_avail = Jan-2015 # CPU description hw_cpu_mhz = 2500 hw_cpu_max_mhz = 2500 hw_nchips = 2 hw_ncores = 24 hw_ncoresperchip = 12 hw_ncpuorder = 1,2 chips hw_fpu = Integrated hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Tesla K80 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K80 hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes hw_accel_desc000= NVIDIA Tesla K80, Kepler GK210, 2496 CUDA cores hw_accel_desc001 = 12 GB GDDR5 RAM hw_accel_desc002 = (Kepler Generation) #################################################################### # Software information #################################################################### openacc=default=default=default: sw_avail = May-2015 sw_file = ext4 sw_compiler = PGI Accelerator Server Complete, Release 15.5 sw_other = NVIDIA Cuda SDK 7.0, driver version 346.46 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 346.46 openacc=default=default: CC = pgcc -V15.5 CXX = pg++ -V15.5 FC = pgfortran -V15.5 openacc=base=default=default: OPTIMIZE = -fast -Mfprelaxed -acc -ta=tesla:cc35,cuda7.0 -tp=haswell-64 openacc=peak=default=default: basepeak=yes 359.miniGhost: EXTRA_LDFLAGS += -Mnomain # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /tmp/spec-accel/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on taurusi2058 Mon Sep 14 17:28:10 2015 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 24 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 12 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 65868116 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = redhat-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_155 = system-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_160 = system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = uname -a: notes_plat_sysinfo_175 = Linux taurusi2058 2.6.32-504.12.2.el6.x86_64 #1 SMP Sun Feb 1 12:14:02 EST notes_plat_sysinfo_180 = 2015 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = run-level 3 Jul 8 14:37 notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /tmp/spec-accel notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_210 = /dev/sda3 ext4 62G 2.9G 56G 5% /tmp notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2680 v3 hw_disk = 62 GB SSD hw_nchips = 2 prepared_by = s1428123 (is never output, only tags rawfile) sw_file = ext4 sw_os000 = Red Hat Enterprise Linux Server release 6.4 sw_os001 = (Santiago) sw_os002 = 2.6.32-504.12.2.el6.x86_64 sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /home/s1428123/run-spec-accel/pgi2014_flags_edited.xml sw_peak_ptrsize = Not Applicable # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/accel/flags/pgi2014_flags.20150930.xml hw_cpu_name = Intel Xeon E5-2680 v3 hw_cpu_char = Intel Turbo Boost Technology up to 3.30 GHz hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3300 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 30 MB I+D on chip per chip hw_ocache = None hw_memory = 64 GB (8 x 8 GB 2Rx8 PC4-2133P-R) hw_disk = 62 GB SSD hw_accel_model = Tesla K80 hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K80 hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 346.46 sw_compiler = PGI Accelerator Server Complete, Release 15.5 sw_file = ext4 sw_state = Run level 3 (Multi-User) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = NVIDIA Cuda SDK 7.0, driver version 346.46 hw_accel_desc000 = NVIDIA Tesla K80, Kepler GK210, 2496 CUDA cores hw_accel_desc001 = 12 GB GDDR5 RAM hw_accel_desc002 = (Kepler Generation) test_sponsor = Technische Universitaet Dresden license_num = 37A tester = Technische Universitaet Dresden hw_avail = Jan-2015 sw_avail = May-2015 prepared_by = s1428123 (is never output, only tags rawfile) hw_vendor = Bull hw_model = Bull R400 hw_nthreadspercore = 1 hw_ncoresperchip = 12 hw_ncores = 24 hw_nchips = 2 sw_os000 = Red Hat Enterprise Linux Server release 6.4 sw_os001 = (Santiago) sw_os002 = 2.6.32-504.12.2.el6.x86_64 notes_plat_000 =MultiThreading disabled in BIOS notes_plat_sysinfo_000 = Sysinfo program /tmp/spec-accel/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on taurusi2058 Mon Sep 14 17:28:10 2015 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 24 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 12 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 65868116 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = redhat-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_155 = system-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_160 = system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = uname -a: notes_plat_sysinfo_175 = Linux taurusi2058 2.6.32-504.12.2.el6.x86_64 #1 SMP Sun Feb 1 12:14:02 EST notes_plat_sysinfo_180 = 2015 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = run-level 3 Jul 8 14:37 notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /tmp/spec-accel notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_210 = /dev/sda3 ext4 62G 2.9G 56G 5% /tmp notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = (End of data from sysinfo program)