# Invocation command line: # /home/alex/accel-1.0/bin/runspec --config K20-13.9 --reportable --flagsurl http://www.spec.org/accel/flags/pgi2014_flags.xml openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### license_num = 37A prepared_by = Alexander Grund (Alexander.Grund@mailbox.tu-dresden.de) tester = Technische Universitaet Dresden test_sponsor = Technische Universitaet Dresden ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" # the rest are default values ext = compsys output_format = asc teeout = no teerunout = yes tune = base #output_root = /local/home//SPECACCEL #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_avail = Apr-2013 hw_cpu_mhz = 2900 hw_cpu_max_mhz = 3500 hw_fpu = Integrated hw_ncores = 6 hw_ncoresperchip = 6 hw_nthreadspercore = 2 hw_ncpuorder = 1 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 15 MB I+D on chip per chip hw_ocache = None hw_vendor = Dell hw_model = Precision T5600 hw_temperature_14130751008888_serial = W00513713 #hw_disk = 1 1000GB Seagate ST1000DM003 SATA disk hw_memory = 16 GB (4 x 4 GB 2Rx4 PC3-12800R-9, ECC) hw_other = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Tesla K20c hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K20c hw_accel_type = GPU hw_accel_connect = PCIe 2.0 16x hw_accel_ecc = yes hw_accel_desc000 = NVIDIA Tesla K20c GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM #################################################################### # Power and temperature meter configuration #################################################################### power = yes power_analyzer = 141.30.75.100:8889 temp_meter = 141.30.75.100:8888 mean_anyway = 1 voltage_range = 250 idle_current_range = 1.2 current_range = 2.5 hw_power_14130751008889_label = Power Analyzer hw_power_14130751008889_vendor = ZES Zimmer hw_power_14130751008889_model = LMG450 hw_power_14130751008889_serial = 07510905 hw_power_14130751008889_connection = RS232 via USB-adapter hw_power_14130751008889_met_inst = PTB (Physikalisch Technische Bundesanstalt) hw_power_14130751008889_cal_org = ZES Zimmer hw_power_14130751008889_cal_label = 04300751001 hw_power_14130751008889_cal_date = 11.05.2013 hw_power_14130751008889_setup000 = connected to the single power supply that powers hw_power_14130751008889_setup001 = the system hw_temperature_14130751008888_label = Temperature Meter hw_temperature_14130751008888_vendor = Digi hw_temperature_14130751008888_model = Watchport/H hw_temperature_14130751008888_connection = USB hw_temperature_14130751008888_setup = positioned in front of intake fan #################################################################### # Software information #################################################################### # Operating system, file system sw_os000 = SLES11 SP3 notes_os_000 = continuously upgraded via SLES update manager sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit env_vars = 1 ENV_GPU_MAX_ALLOC_PERCENT = 100 openacc=default=default=default: sw_avail = Aug-2014 sw_compiler000 = PGI Accelerator Fortran/C/C++ Workstation, sw_compiler001 = Release 13.9 sw_other = NVIDIA CUDA 6.0.9, driver 340.32 hw_psu = 825 W hw_psu_info = Dell D825EF-00 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 340.32 CC = pgcc CXX = pgCC FC = pgfortran OPTIMIZE = -acc -fast -ta=nvidia:tesla basepeak=yes 359.miniGhost: EXTRA_LDFLAGS += -Mnomain opencl=default=default=default: sw_avail = Aug-2014 sw_compiler = Gnu Compiler Collection C/C++ Version 4.3.4 sw_other = NVIDIA CUDA 6.0.9, driver 340.32 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 340.32 opencl=default=default: CC = gcc CXX = g++ FC = f90 #makeflags = -j opencl=base=default=default: OPTIMIZE = -O2 EXTRA_LIBS = -lOpenCL opencl=peak=default=default: basepeak=yes 001.systest: current_range=1.2 120.kmeans: current_range=1.2 # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /home/alex/accel-1.0/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on playground Fri Sep 12 10:01:55 2014 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2667 0 @ 2.90GHz notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 12 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 6 notes_plat_sysinfo_080 = siblings : 12 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_090 = cache size : 15360 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 16256140 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = /usr/bin/lsb_release -d notes_plat_sysinfo_130 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = SuSE-release: notes_plat_sysinfo_150 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_155 = VERSION = 11 notes_plat_sysinfo_160 = PATCHLEVEL = 3 notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = uname -a: notes_plat_sysinfo_175 = Linux playground 3.0.101-0.35-default #1 SMP Wed Jul 9 11:43:04 UTC 2014 notes_plat_sysinfo_180 = (c36987d) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_185 = notes_plat_sysinfo_190 = run-level 3 Sep 8 11:37 last=S notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = SPEC is set to: /home/alex/accel-1.0 notes_plat_sysinfo_205 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_210 = /dev/sda3 ext3 866G 82G 740G 10% /home notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2667 hw_disk000 = 1 TB SATA disk on Dell PERC H310 PCIe host-based hw_disk001 = RAID card hw_nchips = 1 prepared_by = alex (is never output, only tags rawfile) sw_file = ext3 sw_os001 = SUSE Linux Enterprise Server 11 (x86_64) sw_os002 = 3.0.101-0.35-default sw_state = Run level 3 (multi user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/accel/flags/pgi2014_flags.20150303.00.xml