SPEC® CINT2006 Result

Copyright 2006-2014 Standard Performance Evaluation Corporation

Supermicro

SuperServer 1017C-TF (X9SCL-F, Intel G840)

CPU2006 license: 001176 Test date: Apr-2012
Test sponsor: Supermicro Hardware Availability: Apr-2011
Tested by: Supermicro Software Availability: Oct-2011
Benchmark results graph
Hardware
CPU Name: Intel Pentium G840
CPU Characteristics:
CPU MHz: 2800
FPU: Integrated
CPU(s) enabled: 2 cores, 1 chip, 2 cores/chip
CPU(s) orderable: 1 chip
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 3 MB I+D on chip per chip
Other Cache: None
Memory: 8 GB (2 x 4 GB 2Rx8 PC3-10600E-9, ECC)
Disk Subsystem: 1 x 500 GB SATA II, 7200 RPM
Other Hardware: None
Software
Operating System: Red Hat Enterprise Linux Server Release 6.1,
Kernel 2.6.32-131.0.15.el6.x86_64
Compiler: C/C++: Version 12.1.0.225 of Intel C++ Studio XE
for Linux
Auto Parallel: No
File System: ext4
System State: Run level 3 (multi-user)
Base Pointers: 32-bit
Peak Pointers: 32/64-bit
Other Software: Microquill SmartHeap V9.01

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
400.perlbench 2 420 46.6 420 46.5 421 46.4 2 341 57.3 341 57.2 342 57.2
401.bzip2 2 615 31.4 624 30.9 623 31.0 2 581 33.2 583 33.1 585 33.0
403.gcc 2 314 51.2 313 51.4 314 51.3 2 316 51.0 315 51.0 317 50.8
429.mcf 2 174 105   174 105   175 104   2 174 105   174 105   175 104  
445.gobmk 2 510 41.2 509 41.2 510 41.2 2 500 41.9 502 41.8 501 41.9
456.hmmer 2 233 79.9 233 79.9 231 80.8 2 216 86.4 216 86.5 216 86.5
458.sjeng 2 540 44.8 541 44.7 541 44.8 2 518 46.7 519 46.7 519 46.6
462.libquantum 2 104 399   104 399   103 401   2 104 399   104 399   103 401  
464.h264ref 2 519 85.3 520 85.2 534 82.9 2 508 87.0 507 87.3 512 86.5
471.omnetpp 2 316 39.6 316 39.5 317 39.5 2 293 42.7 293 42.7 293 42.7
473.astar 2 383 36.7 383 36.6 384 36.6 2 383 36.7 383 36.6 384 36.6
483.xalancbmk 2 187 74.0 186 74.1 186 74.1 2 187 74.0 186 74.1 186 74.1

Submit Notes

 The taskset mechanism was used to bind copies to processors. The config file option 'submit'
 was used to generate taskset commands to bind each copy to a specific processor.
 For details, please see the config file.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"
 Transparent Huge Pages enabled with:
 echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled

General Notes

Environment variables set by runspec before the start of the run:
LD_LIBRARY_PATH = "/home/usr/cpu2006/libs/32:/home/usr/cpu2006/libs/64"

 Binaries compiled on a system with 1x Core i7-860 CPU + 8GB
 memory using RHEL5.5

Base Compiler Invocation

C benchmarks:

 icc -m32 

C++ benchmarks:

 icpc -m32 

Base Portability Flags

400.perlbench:  -DSPEC_CPU_LINUX_IA32 
462.libquantum:  -DSPEC_CPU_LINUX 
483.xalancbmk:  -DSPEC_CPU_LINUX 

Base Optimization Flags

C benchmarks:

 -xSSE4.2   -ipo   -O3   -no-prec-div   -opt-prefetch   -opt-mem-layout-trans=3 

C++ benchmarks:

 -xSSE4.2   -ipo   -O3   -no-prec-div   -opt-prefetch   -opt-mem-layout-trans=3   -Wl,-z,muldefs   -L/smartheap -lsmartheap 

Base Other Flags

C benchmarks:

403.gcc:  -Dalloca=_alloca 

Peak Compiler Invocation

C benchmarks (except as noted below):

 icc -m32 
400.perlbench:  icc -m64 
401.bzip2:  icc -m64 
456.hmmer:  icc -m64 
458.sjeng:  icc -m64 

C++ benchmarks:

 icpc -m32 

Peak Portability Flags

400.perlbench:  -DSPEC_CPU_LP64   -DSPEC_CPU_LINUX_X64 
401.bzip2:  -DSPEC_CPU_LP64 
456.hmmer:  -DSPEC_CPU_LP64 
458.sjeng:  -DSPEC_CPU_LP64 
462.libquantum:  -DSPEC_CPU_LINUX 
483.xalancbmk:  -DSPEC_CPU_LINUX 

Peak Optimization Flags

C benchmarks:

400.perlbench:  -xSSE4.2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -auto-ilp32 
401.bzip2:  -xSSE4.2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -opt-prefetch   -auto-ilp32   -ansi-alias 
403.gcc:  -xSSE4.2   -ipo   -O3   -no-prec-div 
429.mcf:  basepeak = yes 
445.gobmk:  -xSSE4.2(pass 2)   -prof-gen(pass 1)   -prof-use(pass 2)   -ansi-alias   -opt-mem-layout-trans=3 
456.hmmer:  -xSSE4.2   -ipo   -O3   -no-prec-div   -unroll2   -auto-ilp32 
458.sjeng:  -xSSE4.2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -unroll4   -auto-ilp32 
462.libquantum:  basepeak = yes 
464.h264ref:  -xSSE4.2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -unroll2   -ansi-alias 

C++ benchmarks:

471.omnetpp:  -xSSE4.2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -ansi-alias   -opt-ra-region-strategy=block   -Wl,-z,muldefs   -L/smartheap -lsmartheap 
473.astar:  basepeak = yes 
483.xalancbmk:  basepeak = yes 

Peak Other Flags

C benchmarks:

403.gcc:  -Dalloca=_alloca 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.html,
http://www.spec.org/cpu2006/flags/Supermicro-Platform-Settings-revA.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.xml,
http://www.spec.org/cpu2006/flags/Supermicro-Platform-Settings-revA.xml.